//MODIFIED to drive 5050 RGB strip via PWM on GPIO 12(R),13(G),14(B), UNTESTED

//this code is a modified version of https://github.com/Makuna/NeoPixelBus/issues/103
#ifndef NpbWrapper_h
#define NpbWrapper_h

//#define WORKAROUND_ESP32_BITBANG
//see https://github.com/Aircoookie/WLED/issues/2 for flicker free ESP32 support

//PIN CONFIGURATION
#define LEDPIN 2  //strip pin. Any for ESP32, gpio2 is recommended for ESP8266
#define BTNPIN 0  //button pin. Needs to have pullup (gpio0 recommended)
#define IR_PIN 4  //infrared pin.
#define RLYPIN 15 //pin for relay, will be set HIGH if LEDs are on (-1 to disable). Also usable for standby leds, triggers,...
#define AUXPIN -1 //debug auxiliary output pin (-1 to disable)

#define RLYMDE 1  //mode for relay, 0: LOW if LEDs are on 1: HIGH if LEDs are on


//automatically uses the right driver method for each platform
#ifdef ARDUINO_ARCH_ESP32
#ifdef WORKAROUND_ESP32_BITBANG
#define PIXELMETHOD NeoEsp32BitBangWs2813Method
#else
#define PIXELMETHOD NeoEsp32Rmt0Ws2812xMethod
#endif
#else //esp8266
//you may change to DMA method on pin GPIO3 here
#define PIXELMETHOD NeoEsp8266Uart800KbpsMethod
//#define PIXELMETHOD NeoEsp8266Dma800KbpsMethod
#endif

//you can now change the color order in the web settings
#define PIXELFEATURE3 NeoGrbFeature
#define PIXELFEATURE4 NeoGrbwFeature

#include <NeoPixelBrightnessBus.h>

enum NeoPixelType
{
  NeoPixelType_None = 0,
  NeoPixelType_Grb  = 1,
  NeoPixelType_Grbw = 2,
  NeoPixelType_End  = 3
};

class NeoPixelWrapper
{
public:
  NeoPixelWrapper() :
      // initialize each member to null
      _pGrb(NULL),
      _pGrbw(NULL),
      _type(NeoPixelType_None)
  {

  }

  ~NeoPixelWrapper()
  {
    cleanup();
  }

  void Begin(NeoPixelType type, uint16_t countPixels)
  {
    cleanup();
    _type = type;

    switch (_type) {

      case NeoPixelType_Grb:
        _pGrb = new NeoPixelBrightnessBus<PIXELFEATURE3,PIXELMETHOD>(countPixels, LEDPIN);
        _pGrb->Begin();
      break;

      case NeoPixelType_Grbw:
        _pGrbw = new NeoPixelBrightnessBus<PIXELFEATURE4,PIXELMETHOD>(countPixels, LEDPIN);
        _pGrbw->Begin();
      break;
    }
	
	  //init PWM pins
	  pinMode(12, OUTPUT);
	  pinMode(13, OUTPUT);
	  pinMode(14, OUTPUT);
  }

  void Show()
  {
    #ifdef ARDUINO_ARCH_ESP32
    #ifdef WORKAROUND_ESP32_BITBANG
    delay(1);
    portDISABLE_INTERRUPTS(); //this is a workaround to prevent flickering (see https://github.com/adafruit/Adafruit_NeoPixel/issues/139)
    #endif
    #endif
    
    switch (_type) {
      case NeoPixelType_Grb:  _pGrb->Show();   break;
      case NeoPixelType_Grbw: _pGrbw->Show();  break;
    }
    
    #ifdef ARDUINO_ARCH_ESP32
    #ifdef WORKAROUND_ESP32_BITBANG
    portENABLE_INTERRUPTS();
    #endif
    #endif
  }
  
  bool CanShow() const
  {
    switch (_type) {
      case NeoPixelType_Grb:  _pGrb->CanShow();  break;
      case NeoPixelType_Grbw: _pGrbw->CanShow(); break;
    }
  }
  
  void SetRGBPWM(uint16_t indexPixel, uint8_t r, uint8_t g, uint8_t b)
  {
	  if (indexPixel == 0) //5050 strip is first pixel
	  {
		  analogWrite(12, r*4);
		  analogWrite(13, g*4);
		  analogWrite(14, b*4);
	  }
  }

    void SetPixelColor(uint16_t indexPixel, RgbColor color)
    {
	SetRGBPWM(indexPixel, color.R, color.G, color.B);
	
      switch (_type) {
        case NeoPixelType_Grb: _pGrb->SetPixelColor(indexPixel, color);   break;
        case NeoPixelType_Grbw:_pGrbw->SetPixelColor(indexPixel, color);  break;
      }
    }

    void SetPixelColor(uint16_t indexPixel, RgbwColor color)
    {
	SetRGBPWM(indexPixel, color.R, color.G, color.B);
	  
      switch (_type) {
        case NeoPixelType_Grb:  _pGrb->SetPixelColor(indexPixel, RgbColor(color.R,color.G,color.B));   break;
        case NeoPixelType_Grbw: _pGrbw->SetPixelColor(indexPixel, color);   break;
      }
    }

    void SetBrightness(byte b)
    {
      switch (_type) {
        case NeoPixelType_Grb: _pGrb->SetBrightness(b);   break;
        case NeoPixelType_Grbw:_pGrbw->SetBrightness(b);  break;
      }
    }

    RgbColor GetPixelColor(uint16_t indexPixel) const
    {
      switch (_type) {
        case NeoPixelType_Grb:  return _pGrb->GetPixelColor(indexPixel);     break;
        case NeoPixelType_Grbw: /*doesn't support it so we don't return it*/ break;
      }
      return 0;
    }

// NOTE:  Due to feature differences, some support RGBW but the method name
// here needs to be unique, thus GetPixeColorRgbw
    RgbwColor GetPixelColorRgbw(uint16_t indexPixel) const
    {
      switch (_type) {
        case NeoPixelType_Grb:  return _pGrb->GetPixelColor(indexPixel);  break;
        case NeoPixelType_Grbw: return _pGrbw->GetPixelColor(indexPixel); break;
      }
      return 0;
    }

    void ClearTo(RgbColor color)
    {
      switch (_type) {
        case NeoPixelType_Grb: _pGrb->ClearTo(color);   break;
        case NeoPixelType_Grbw:_pGrbw->ClearTo(color);  break;
      }
    }

    void ClearTo(RgbwColor color)
    {
      switch (_type) {
        case NeoPixelType_Grb:    break;
        case NeoPixelType_Grbw:_pGrbw->ClearTo(color);  break;
      }
    }

private:
  NeoPixelType _type;

  // have a member for every possible type
  NeoPixelBrightnessBus<PIXELFEATURE3,PIXELMETHOD>*  _pGrb;
  NeoPixelBrightnessBus<PIXELFEATURE4,PIXELMETHOD>* _pGrbw;

  void cleanup()
  {
    switch (_type) {
      case NeoPixelType_Grb:  delete _pGrb ; _pGrb  = NULL; break;
      case NeoPixelType_Grbw: delete _pGrbw; _pGrbw = NULL; break;
    }
  }
};
#endif