Last active
December 30, 2024 03:10
-
-
Save PIPIPIG233666/2cc2466e1d15deb1a8e8a1ae9336c20c to your computer and use it in GitHub Desktop.
Revisions
-
PIPIPIG233666 revised this gist
Dec 30, 2024 . 1 changed file with 357 additions and 324 deletions.There are no files selected for viewing
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode charactersOriginal file line number Diff line number Diff line change @@ -1,9 +1,6 @@ [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014] [ 0.000000] Linux version 6.6.67 (pppig@Gentoo) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28442+5-e6ce868c3a) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Mon Dec 30 02:46:51 2024 [ 0.000000] Machine model: Linksys MR7500 [ 0.000000] OF: reserved mem: 0x0000000000060000..0x0000000000065fff (24 KiB) nomap non-reusable memory@60000 [ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable memory@40000000 [ 0.000000] OF: reserved mem: 0x000000004a100000..0x000000004a4fffff (4096 KiB) nomap non-reusable bootloader@4a100000 @@ -28,11 +25,11 @@ Jumping to AARCH64 kernel via monitor [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 19 pages/cpu s37736 r8192 d31896 u77824 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: init=/sbin/init rootfstype=squashfs ubi.mtd=rootfs root=mtd:squashfs rootwait root=/dev/ubiblock0_0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 @@ -41,7 +38,7 @@ Jumping to AARCH64 kernel via monitor [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.000000] software IO TLB: mapped [mem 0x000000005f4c0000-0x000000005f5c0000] (1MB) [ 0.000000] Memory: 416768K/524288K available (8384K kernel code, 996K rwdata, 2584K rodata, 1728K init, 279K bss, 107520K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. @@ -53,324 +50,360 @@ Jumping to AARCH64 kernel via monitor [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000425] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000438] pid_max: default: 32768 minimum: 301 [ 0.005501] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.005513] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.009766] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.010017] rcu: Hierarchical SRCU implementation. [ 0.010022] rcu: Max phase no-delay instances is 1000. [ 0.011081] smp: Bringing up secondary CPUs ... [ 0.011729] Detected VIPT I-cache on CPU1 [ 0.011828] CPU1: Booted secondary processor 0x0000000001 [0x51af8014] [ 0.012513] Detected VIPT I-cache on CPU2 [ 0.012584] CPU2: Booted secondary processor 0x0000000002 [0x51af8014] [ 0.013237] Detected VIPT I-cache on CPU3 [ 0.013304] CPU3: Booted secondary processor 0x0000000003 [0x51af8014] [ 0.013373] smp: Brought up 1 node, 4 CPUs [ 0.013382] SMP: Total of 4 processors activated. [ 0.013387] CPU features: detected: 32-bit EL0 Support [ 0.013392] CPU features: detected: CRC32 instructions [ 0.013455] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.013461] CPU: All CPU(s) started at EL1 [ 0.013464] alternatives: applying system-wide alternatives [ 0.023080] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.023104] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.024821] pinctrl core: initialized pinctrl subsystem [ 0.026859] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.027455] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.027494] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.027526] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.027900] thermal_sys: Registered thermal governor 'step_wise' [ 0.027956] cpuidle: using governor menu [ 0.028188] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.028275] ASID allocator initialised with 65536 entries [ 0.035612] /soc@0/pinctrl@1000000/i2c_1_pins: Fixed dependency cycle(s) with /soc@0/pinctrl@1000000/i2c_1_pins [ 0.035733] /soc@0/interrupt-controller@b000000: Fixed dependency cycle(s) with /soc@0/interrupt-controller@b000000 [ 0.037562] /soc@0/pinctrl@1000000: Fixed dependency cycle(s) with /soc@0/pinctrl@1000000/sd_ldo_pins [ 0.037584] /soc@0/pinctrl@1000000/i2c_1_pins: Fixed dependency cycle(s) with /soc@0/pinctrl@1000000/i2c_1_pins [ 0.077058] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.079552] Modules: 29232 pages in range for non-PLT usage [ 0.079559] Modules: 520752 pages in range for PLT usage [ 0.084783] SCSI subsystem initialized [ 0.084979] usbcore: registered new interface driver usbfs [ 0.085027] usbcore: registered new interface driver hub [ 0.085076] usbcore: registered new device driver usb [ 0.085356] qcom_scm: convention: smc arm 64 [ 0.086678] s2: Bringing 0uV into 725000-725000uV [ 0.087401] clocksource: Switched to clocksource arch_sys_counter [ 0.087811] l2: Bringing 0uV into 1800000-1800000uV [ 0.087946] qcom_rpm_smd_regulator remoteproc:glink-edge:rpm-requests:regulators: Supply for l2 (l2) resolved to itself [ 0.091316] NET: Registered PF_INET protocol family [ 0.091466] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.093630] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.093648] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.093663] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.093711] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.093849] TCP: Hash tables configured (established 4096 bind 4096) [ 0.094329] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear) [ 0.094497] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.094522] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.094933] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.094981] PCI: CLS 0 bytes, default 64 [ 0.096783] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.097570] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.097579] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.105211] qcom-qmp-usb-phy 78000.ssphy: supply vdda-phy not found, using dummy regulator [ 0.105412] qcom-qmp-usb-phy 78000.ssphy: supply vdda-pll not found, using dummy regulator [ 0.107016] qcom-qusb2-phy 59000.qusb: supply vdd not found, using dummy regulator [ 0.107168] qcom-qusb2-phy 59000.qusb: supply vdda-pll not found, using dummy regulator [ 0.107212] qcom-qusb2-phy 59000.qusb: supply vdda-phy-dpdm not found, using dummy regulator [ 0.107413] qcom-qusb2-phy 59000.qusb: Registered Qcom-QUSB2 phy [ 0.107652] qcom-qusb2-phy 79000.qusb: supply vdd not found, using dummy regulator [ 0.107798] qcom-qusb2-phy 79000.qusb: supply vdda-pll not found, using dummy regulator [ 0.107841] qcom-qusb2-phy 79000.qusb: supply vdda-phy-dpdm not found, using dummy regulator [ 0.108023] qcom-qusb2-phy 79000.qusb: Registered Qcom-QUSB2 phy [ 0.109644] qcom-pcie 20000000.pci: host bridge /soc@0/pci@20000000 ranges: [ 0.109707] qcom-pcie 20000000.pci: IO 0x0020200000..0x002020ffff -> 0x0000000000 [ 0.109733] qcom-pcie 20000000.pci: MEM 0x0020220000..0x002fffffff -> 0x0020220000 [ 0.117269] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.118491] msm_serial 78b0000.serial: msm_serial: detected port #1 [ 0.118527] msm_serial 78b0000.serial: uartclk = 24000000 [ 0.118845] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 22, base_baud = 1500000) is a MSM [ 0.119342] msm_serial 78b1000.serial: msm_serial: detected port #0 [ 0.119375] msm_serial 78b1000.serial: uartclk = 1843199 [ 0.119680] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 23, base_baud = 115199) is a MSM [ 0.119710] msm_serial: console setup on port #0 [ 0.119782] printk: console [ttyMSM0] enabled [ 0.249112] qcom-pcie 20000000.pci: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 1024G [ 0.255299] msm_serial: driver initialized [ 0.357406] qcom-pcie 20000000.pci: PCIe Gen.3 x1 link up [ 1.040284] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00 [ 1.045344] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.051428] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.056885] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff] [ 1.063103] pci 0000:00:00.0: [17cb:1003] type 01 class 0x060400 [ 1.069925] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 1.076128] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.085197] pci 0000:01:00.0: [17cb:1104] type 00 class 0x028000 [ 1.088408] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 1.094894] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.101223] pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link) [ 1.107637] pci 0000:00:00.0: BAR 8: assigned [mem 0x20400000-0x205fffff] [ 1.121917] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff] [ 1.128870] pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit] [ 1.135661] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.142744] pci 0000:00:00.0: bridge window [mem 0x20400000-0x205fffff] [ 1.150550] pcieport 0000:00:00.0: PME: Signaling with IRQ 26 [ 1.155195] pcieport 0000:00:00.0: AER: enabled with IRQ 26 [ 1.159795] loop: module loaded [ 1.167327] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac [ 1.169290] nand: Hynix H27S4G8F2EDA-BC [ 1.175716] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 [ 1.179778] 19 fixed-partitions partitions found on MTD device qcom_nand.0 [ 1.186932] Creating 19 MTD partitions on "qcom_nand.0": [ 1.193885] 0x000000000000-0x000000180000 : "0:sbl1" [ 1.201366] 0x000000180000-0x000000280000 : "0:mibib" [ 1.205782] 0x000000280000-0x000000600000 : "0:qsee" [ 1.213152] 0x000000600000-0x000000680000 : "0:devcfg" [ 1.215222] 0x000000680000-0x000000700000 : "0:rpm" [ 1.220187] 0x000000700000-0x000000780000 : "0:cdt" [ 1.224925] 0x000000780000-0x000000800000 : "0:appsblenv" [ 1.229864] 0x000000800000-0x000000980000 : "0:appsbl" [ 1.236282] 0x000000980000-0x000000a00000 : "0:art" [ 1.240460] 0x000000a00000-0x000000a80000 : "0:ethphyfw" [ 1.245480] 0x000000a80000-0x000000b00000 : "u_env" [ 1.250852] 0x000000b00000-0x000000b40000 : "s_env" [ 1.255090] 0x000000b40000-0x000000b80000 : "devinfo" [ 1.259998] 0x000000b80000-0x000005d80000 : "kernel" [ 1.341678] 0x000001380000-0x000005d80000 : "rootfs" [ 1.412859] mtd: setting mtd14 (rootfs) as root device [ 1.413246] mtdsplit: no squashfs found in "rootfs" [ 1.416903] 0x000005d80000-0x00000af80000 : "alt_kernel" [ 1.500034] 0x000006580000-0x00000af80000 : "alt_rootfs" [ 1.570537] 0x00000af80000-0x00000b380000 : "sysdiag" [ 1.574902] 0x00000b380000-0x00001f080000 : "syscfg" [ 1.900626] i2c_dev: i2c /dev entries driver [ 1.905851] sdhci: Secure Digital Host Controller Interface driver [ 1.905895] sdhci: Copyright(c) Pierre Ossman [ 1.910982] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.918023] remoteproc remoteproc0: releasing cd00000.remoteproc [ 1.922636] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 1.928925] NET: Registered PF_INET6 protocol family [ 1.936006] Segment Routing with IPv6 [ 1.940260] In-situ OAM (IOAM) with IPv6 [ 1.943821] NET: Registered PF_PACKET protocol family [ 1.947805] 8021q: 802.1Q VLAN Support v1.8 [ 1.981265] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 1.981554] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 1.987422] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 2 [ 1.993989] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 2.001683] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 2.009184] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 2.018318] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 675000 uV [ 2.025242] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 787500 uV [ 2.035251] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 850000 uV [ 2.045059] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 912500 uV [ 2.054886] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 576, quot_offset[ 7]= 0 [ 2.064670] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 765, quot_offset[ 7]= 185 [ 2.075519] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]= 861, quot_offset[ 7]= 95 [ 2.086456] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]= 946, quot_offset[ 7]= 85 [ 2.097692] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 2.100414] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 799999 KHz, changing to: 864000 KHz [ 2.117326] remoteproc remoteproc0: cd00000.remoteproc is available [ 2.126075] ubi0: attaching mtd14 [ 2.507404] random: crng init done [ 2.543566] ubi0: scanning is finished [ 2.550803] ubi0: attached mtd14 (name "rootfs", size 74 MiB) [ 2.550838] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.555530] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.562323] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.569164] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0 [ 2.575927] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 2.582184] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1735501668 [ 2.589219] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 80 [ 2.598516] ubi0: background thread "ubi_bgt0d" started, PID 605 [ 2.599267] block ubiblock0_0: created from ubi0:0(ro�[ 2.622008] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 2.622536] Freeing unused kernel memory: 1728K [ 2.628255] Run /sbin/init as init process [ 2.799640] init: Console is alive [ 2.799750] init: - watchdog - [ 3.807272] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.886825] Aquantia AQR114C 90000.mdio-1:08: loading firmware version 'v5.6.5 Cybertan Divo 090221 14:43:44' from 'NVMEM' [ 14.683169] hwmon hwmon0: temp1_input not attached to any thermal zone [ 14.698375] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 14.737670] ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist [ 14.878776] init: - preinit - [ 15.157859] __adpt_hppe_uniphy_psgmii_mode_set[1194]:INFO:uniphy 0 psgmii channel selection [ 15.286750] mtdblock: MTD device 'devinfo' is NAND, please consider using UBI block devices instead. Cannot parse config file '/etc/fw_env.config': No such file or directory Failed to find NVMEM device Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 16.097522] regi_init[2525]:INFO:Initializing CPPE Done!! [ 16.097649] regi_init[2574]:INFO:qca-ssdk module init succeeded! [ 16.106075] EDMA ver 1 hw init [ 16.108239] EDMA HW Reset completed succesfully [ 16.110878] Num rings - TxDesc:1 (23-23) TxCmpl:1 (23-23) [ 16.115306] RxDesc:1 (15-15) RxFill:1 (7-7) [ 16.121259] dp1: ppe offload disabled: 0 for macid 1 [ 16.124826] dp1: Switch attached to macid 1 status: 0 [ 16.308247] Qualcomm QCA8075 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL) [ 16.309329] GMAC2(ffffff8002836900) Invalid MAC@ - using 4e:91:0c:a2:d9:fd [ 16.317146] dp2: ppe offload disabled: 0 for macid 2 [ 16.324017] dp2: Switch attached to macid 2 status: 0 [ 16.397808] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL) [ 16.398824] GMAC3(ffffff8004239900) Invalid MAC@ - using 96:38:cc:b9:92:17 [ 16.406704] dp3: ppe offload disabled: 0 for macid 3 [ 16.413586] dp3: Switch attached to macid 3 status: 0 [ 16.497786] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL) [ 16.498866] GMAC4(ffffff800423d900) Invalid MAC@ - using 1e:c0:69:3a:ca:8d [ 16.506684] dp4: ppe offload disabled: 0 for macid 4 [ 16.513551] dp4: Switch attached to macid 4 status: 0 [ 16.597734] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL) [ 16.598586] GMAC5(ffffff8004189900) Invalid MAC@ - using 76:6c:2f:11:0f:04 [ 16.606628] dp5-syn: ppe offload disabled: 0 for macid 5 [ 16.613524] dp5-syn: Switch attached to macid 5 status: 0 sendto(): Network unreachable [ 16.629644] Aquantia AQR114C 90000.mdio-1:08: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:08, irq=POLL) [ 16.630582] ********************************************************** [ 16.638568] * NSS Data Plane driver [ 16.645046] ********************************************************** [ 16.675815] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 16.675865] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 16.680375] xhci-hcd xhci-hcd.1.auto: USB3 root hub has no ports [ 16.687770] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008000000010 [ 16.694037] xhci-hcd xhci-hcd.1.auto: irq 42, io mem 0x07000000 [ 16.703716] hub 1-0:1.0: USB hub found [ 16.709056] hub 1-0:1.0: 1 port detected [ 16.713222] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 16.716923] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 16.723187] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008000000010 [ 16.729819] xhci-hcd xhci-hcd.2.auto: irq 43, io mem 0x08a00000 [ 16.739251] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 16.745043] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 16.750610] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 16.758543] hub 2-0:1.0: USB hub found [ 16.764760] hub 2-0:1.0: 1 port detected [ 16.768897] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 16.772981] hub 3-0:1.0: USB hub found [ 16.780795] hub 3-0:1.0: 1 port detected [ 16.787007] usbcore: registered new interface driver usb-storage [ 16.788578] kmodloader: done loading kernel modules from /etc/modules-boot.d/* sendto(): Network unreachable sendto(): Network unreachable [ 19.678435] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 19.678550] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 890 [ 19.720743] UBIFS (ubi0:1): recovery needed [ 19.820779] UBIFS (ubi0:1): recovery completed [ 19.820888] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 19.824126] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 19.832040] UBIFS (ubi0:1): FS size: 40505344 bytes (38 MiB, 319 LEBs), max 329 LEBs, journal size 2031616 bytes (1 MiB, 16 LEBs) [ 19.841934] UBIFS (ubi0:1): reserved for root: 1913167 bytes (1868 KiB) [ 19.853561] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 379534D6-EF77-4A1F-B07E-54A9C7A63247, small LPT model [ 19.864735] mount_root: switching to ubifs overlay [ 19.875739] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 19.881963] urandom-seed: Seeding with /etc/urandom.seed [ 20.018408] procd: - early - [ 20.018525] procd: - watchdog - [ 20.585226] procd: - watchdog - [ 20.586838] procd: - ubus - [ 20.743279] procd: - init - Please press Enter to activate this console. [ 21.063192] kmodloader: loading kernel modules from /etc/modules.d/* [ 21.166570] sctp: Hash tables configured (bind 256/256) [ 21.173810] hid: raw HID events driver (C) Jiri Kosina [ 21.175367] GACT probability on [ 21.178621] Mirror/redirect action on [ 21.185625] u32 classifier [ 21.185652] input device check on [ 21.187297] Actions configured [ 21.197598] ntfs3: Enabled Linux POSIX ACLs support [ 21.204887] urngd: v1.0.2 started. [ 21.212895] Bluetooth: Core ver 2.22 [ 21.213019] NET: Registered PF_BLUETOOTH protocol family [ 21.215540] Bluetooth: HCI device and connection manager initialized [ 21.220862] Bluetooth: HCI socket layer initialized [ 21.227174] Bluetooth: L2CAP socket layer initialized [ 21.231790] Bluetooth: SCO socket layer initialized [ 21.238071] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.241669] Bluetooth: BNEP filters: protocol multicast [ 21.247232] Bluetooth: BNEP socket layer initialized [ 21.256139] usbcore: registered new interface driver btusb [ 21.257960] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a [ 21.262680] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2 [ 21.271283] Bluetooth: HCI UART driver ver 2.3 [ 21.276998] Bluetooth: HCI UART protocol H4 registered [ 21.281522] Bluetooth: HCI UART protocol BCSP registered [ 21.287571] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 21.292113] Bluetooth: HIDP socket layer initialized [ 21.307300] NET: Registered PF_QIPCRTR protocol family [ 21.309941] Bluetooth: RFCOMM TTY layer initialized [ 21.311342] Bluetooth: RFCOMM socket layer initialized [ 21.316119] Bluetooth: RFCOMM ver 1.11 [ 21.330653] xt_time: kernel timezone is -0000 [ 21.416699] PPP generic driver version 2.4.2 [ 21.417714] NET: Registered PF_PPPOX protocol family [ 21.421975] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 21.424988] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved. [ 21.441648] ath11k c000000.wifi: ipq6018 hw1.0 [ 21.442256] ath11k c000000.wifi: FW memory mode: 1 [ 21.494588] remoteproc remoteproc0: powering up cd00000.remoteproc [ 21.511043] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340 [ 22.485440] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up [ 22.486617] ath11k c000000.wifi: qmi ignore invalid mem req type 3 [ 22.492393] ath11k_pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit] [ 22.492989] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff [ 22.498059] ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 22.505885] ath11k c000000.wifi: fw_version 0x25008f8e fw_build_timestamp 2024-03-01 03:54 fw_build_id WLAN.HK.2.5.0.1-03982-QCAHKSWPL_SILICONZ-3 [ 22.514950] ath11k_pci 0000:01:00.0: MSI vectors: 16 [ 22.533702] ath11k_pci 0000:01:00.0: qcn9074 hw1.0 [ 22.538701] ath11k_pci 0000:01:00.0: FW memory mode: 2 [ 22.729936] mhi mhi0: Requested to power ON [ 22.729993] mhi mhi0: Power on setup success [ 23.477446] mhi mhi0: Wait for device to enter SBL or Mission mode [ 23.529547] kmodloader: done loading kernel modules from /etc/modules.d/* [ 23.543719] ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff [ 23.543775] ath11k_pci 0000:01:00.0: fw_version 0x290b8862 fw_build_timestamp 2024-09-23 10:51 fw_build_id [ 24.025198] ath11k_pci 0000:01:00.0: htt event 48 not handled [ 26.178536] br-lan: port 1(lan1) entered blocking state [ 26.178576] br-lan: port 1(lan1) entered disabled state [ 26.182666] nss-dp 3a001000.dp1 lan1: entered allmulticast mode [ 26.188045] nss-dp 3a001000.dp1 lan1: entered promiscuous mode [ 26.199193] br-lan: port 2(lan2) entered blocking state [ 26.199599] br-lan: port 2(lan2) entered disabled state [ 26.204760] nss-dp 3a001200.dp2 lan2: entered allmulticast mode [ 26.210183] nss-dp 3a001200.dp2 lan2: entered promiscuous mode [ 26.218716] br-lan: port 3(lan3) entered blocking state [ 26.221732] br-lan: port 3(lan3) entered disabled state [ 26.226873] nss-dp 3a001400.dp3 lan3: entered allmulticast mode [ 26.232267] nss-dp 3a001400.dp3 lan3: entered promiscuous mode [ 26.240436] br-lan: port 4(lan4) entered blocking state [ 26.243858] br-lan: port 4(lan4) entered disabled state [ 26.249057] nss-dp 3a001600.dp4 lan4: entered allmulticast mode [ 26.254475] nss-dp 3a001600.dp4 lan4: entered promiscuous mode [ 26.267704] br-lan: port 5(wan) entered blocking state [ 26.267742] br-lan: port 5(wan) entered disabled state [ 26.271769] nss-dp 3a003000.dp5-syn wan: entered allmulticast mode [ 26.277070] nss-dp 3a003000.dp5-syn wan: entered promiscuous mode [ 27.148621] br-lan: port 6(phy0-ap0) entered blocking state [ 27.148662] br-lan: port 6(phy0-ap0) entered disabled state [ 27.153053] ath11k c000000.wifi phy0-ap0: entered allmulticast mode [ 27.158777] ath11k c000000.wifi phy0-ap0: entered promiscuous mode [ 27.164943] br-lan: port 6(phy0-ap0) entered blocking state [ 27.171128] br-lan: port 6(phy0-ap0) entered forwarding state [ 27.183089] br-lan: port 6(phy0-ap0) entered disabled state [ 27.291312] br-lan: port 7(phy1-ap0) entered blocking state [ 27.291353] br-lan: port 7(phy1-ap0) entered disabled state [ 27.295744] ath11k c000000.wifi phy1-ap0: entered allmulticast mode [ 27.301501] ath11k c000000.wifi phy1-ap0: entered promiscuous mode [ 27.307740] br-lan: port 7(phy1-ap0) entered blocking state [ 27.313757] br-lan: port 7(phy1-ap0) entered forwarding state [ 27.487194] br-lan: port 8(phy2-ap0) entered blocking state [ 27.487232] br-lan: port 8(phy2-ap0) entered disabled state [ 27.491815] ath11k_pci 0000:01:00.0 phy2-ap0: entered allmulticast mode [ 27.497315] ath11k_pci 0000:01:00.0 phy2-ap0: entered promiscuous mode [ 27.504067] br-lan: port 8(phy2-ap0) entered blocking state [ 27.510373] br-lan: port 8(phy2-ap0) entered forwarding state [ 28.543406] br-lan: port 6(phy0-ap0) entered blocking state [ 28.543459] br-lan: port 6(phy0-ap0) entered forwarding state -
Dec 28, 2024 . 1 changed file with 325 additions and 285 deletions.There are no files selected for viewing
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode charactersOriginal file line number Diff line number Diff line change @@ -1,13 +1,15 @@ Starting kernel ... Jumping to AARCH64 kernel via monitor [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014] [ 0.000000] Linux version 6.6.67 (pppig@Gentoo) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28410-a85059438f) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Thu Dec 26 17:18:06 2024 [ 0.000000] Machine model: Linksys MR7350 [ 0.000000] OF: reserved mem: 0x0000000000060000..0x0000000000065fff (24 KiB) nomap non-reusable memory@60000 [ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable memory@40000000 [ 0.000000] OF: reserved mem: 0x000000004a100000..0x000000004a4fffff (4096 KiB) nomap non-reusable bootloader@4a100000 [ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable memory@4a600000 [ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable memory@4aa00000 [ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004e1fffff (56320 KiB) nomap non-reusable memory@4ab00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] DMA32 empty @@ -18,8 +20,8 @@ [ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a0fffff] [ 0.000000] node 0: [mem 0x000000004a100000-0x000000004a4fffff] [ 0.000000] node 0: [mem 0x000000004a500000-0x000000004a5fffff] [ 0.000000] node 0: [mem 0x000000004a600000-0x000000004e1fffff] [ 0.000000] node 0: [mem 0x000000004e200000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. @@ -30,7 +32,7 @@ [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: init=/sbin/init rootfstype=squashfs ubi.mtd=rootfs root=mtd:squashfs rootwait root=/dev/ubiblock0_0 rootfstype=squashfs ro [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 @@ -39,7 +41,7 @@ [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.000000] software IO TLB: mapped [mem 0x000000005f4c0000-0x000000005f5c0000] (1MB) [ 0.000000] Memory: 417584K/524288K available (8128K kernel code, 902K rwdata, 2396K rodata, 1536K init, 276K bss, 106704K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. @@ -51,286 +53,324 @@ [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000068] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000081] pid_max: default: 32768 minimum: 301 [ 0.005241] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.005253] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.009503] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.009719] rcu: Hierarchical SRCU implementation. [ 0.009724] rcu: Max phase no-delay instances is 1000. [ 0.010531] smp: Bringing up secondary CPUs ... [ 0.011186] Detected VIPT I-cache on CPU1 [ 0.011284] CPU1: Booted secondary processor 0x0000000001 [0x51af8014] [ 0.011932] Detected VIPT I-cache on CPU2 [ 0.011999] CPU2: Booted secondary processor 0x0000000002 [0x51af8014] [ 0.012651] Detected VIPT I-cache on CPU3 [ 0.012717] CPU3: Booted secondary processor 0x0000000003 [0x51af8014] [ 0.012784] smp: Brought up 1 node, 4 CPUs [ 0.012792] SMP: Total of 4 processors activated. [ 0.012797] CPU features: detected: 32-bit EL0 Support [ 0.012802] CPU features: detected: CRC32 instructions [ 0.012864] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.012871] CPU: All CPU(s) started at EL1 [ 0.012873] alternatives: applying system-wide alternatives [ 0.021949] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021973] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.023705] pinctrl core: initialized pinctrl subsystem [ 0.025740] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.026358] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.026397] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.026430] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.026811] thermal_sys: Registered thermal governor 'step_wise' [ 0.026867] cpuidle: using governor menu [ 0.027089] ASID allocator initialised with 65536 entries [ 0.033721] /soc@0/pinctrl@1000000/i2c_1_pins: Fixed dependency cycle(s) with /soc@0/pinctrl@1000000/i2c_1_pins [ 0.033848] /soc@0/interrupt-controller@b000000: Fixed dependency cycle(s) with /soc@0/interrupt-controller@b000000 [ 0.035639] /soc@0/pinctrl@1000000: Fixed dependency cycle(s) with /soc@0/pinctrl@1000000/sd_ldo_pins [ 0.035662] /soc@0/pinctrl@1000000/i2c_1_pins: Fixed dependency cycle(s) with /soc@0/pinctrl@1000000/i2c_1_pins [ 0.075085] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.077019] Modules: 29424 pages in range for non-PLT usage [ 0.077026] Modules: 520944 pages in range for PLT usage [ 0.082208] SCSI subsystem initialized [ 0.082401] usbcore: registered new interface driver usbfs [ 0.082448] usbcore: registered new interface driver hub [ 0.082498] usbcore: registered new device driver usb [ 0.082776] qcom_scm: convention: smc arm 64 [ 0.084276] s2: Bringing 0uV into 725000-725000uV [ 0.084894] clocksource: Switched to clocksource arch_sys_counter [ 0.085401] l2: Bringing 0uV into 1800000-1800000uV [ 0.085547] qcom_rpm_smd_regulator remoteproc:glink-edge:rpm-requests:regulators: Supply for l2 (l2) resolved to itself [ 0.088782] NET: Registered PF_INET protocol family [ 0.088921] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.091088] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.091106] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.091120] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.091168] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.091306] TCP: Hash tables configured (established 4096 bind 4096) [ 0.091783] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear) [ 0.091954] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.091979] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.092418] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.092455] PCI: CLS 0 bytes, default 64 [ 0.093975] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.094586] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.094593] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.102242] qcom-qmp-usb-phy 78000.ssphy: supply vdda-phy not found, using dummy regulator [ 0.102380] qcom-qmp-usb-phy 78000.ssphy: supply vdda-pll not found, using dummy regulator [ 0.103975] qcom-qusb2-phy 59000.qusb: supply vdd not found, using dummy regulator [ 0.104127] qcom-qusb2-phy 59000.qusb: supply vdda-pll not found, using dummy regulator [ 0.104169] qcom-qusb2-phy 59000.qusb: supply vdda-phy-dpdm not found, using dummy regulator [ 0.104359] qcom-qusb2-phy 59000.qusb: Registered Qcom-QUSB2 phy [ 0.104584] qcom-qusb2-phy 79000.qusb: supply vdd not found, using dummy regulator [ 0.104725] qcom-qusb2-phy 79000.qusb: supply vdda-pll not found, using dummy regulator [ 0.104766] qcom-qusb2-phy 79000.qusb: supply vdda-phy-dpdm not found, using dummy regulator [ 0.104945] qcom-qusb2-phy 79000.qusb: Registered Qcom-QUSB2 phy [ 0.106618] qcom-pcie 20000000.pci: host bridge /soc@0/pci@20000000 ranges: [ 0.106673] qcom-pcie 20000000.pci: IO 0x0020200000..0x002020ffff -> 0x0000000000 [ 0.106699] qcom-pcie 20000000.pci: MEM 0x0020220000..0x002fffffff -> 0x0020220000 [ 0.113872] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.115028] msm_serial 78b0000.serial: msm_serial: detected port #1 [ 0.115080] msm_serial 78b0000.serial: uartclk = 24000000 [ 0.115413] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 22, base_baud = 1500000) is a MSM [ 0.115866] msm_serial 78b1000.serial: msm_serial: detected port #0 [ 0.115896] msm_serial 78b1000.serial: uartclk = 1843199 [ 0.116191] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 23, base_baud = 115199) is a MSM [ 0.116223] msm_serial: console setup on port #0 [ 0.116287] printk: console [ttyMSM0] enabled [ 0.246592] qcom-pcie 20000000.pci: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 1024G [ 0.251624] msm_serial: driver initialized [ 0.354899] qcom-pcie 20000000.pci: PCIe Gen.3 x1 link up [ 1.031780] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00 [ 1.036912] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.042972] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.048452] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff] [ 1.054635] pci 0000:00:00.0: [17cb:1003] type 01 class 0x060400 [ 1.061481] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 1.067693] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.076648] pci 0000:01:00.0: [17cb:1104] type 00 class 0x028000 [ 1.079948] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 1.086457] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.092769] pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link) [ 1.099179] pci 0000:00:00.0: BAR 8: assigned [mem 0x20400000-0x205fffff] [ 1.113474] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff] [ 1.120421] pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit] [ 1.127227] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.134293] pci 0000:00:00.0: bridge window [mem 0x20400000-0x205fffff] [ 1.142132] pcieport 0000:00:00.0: PME: Signaling with IRQ 26 [ 1.146734] pcieport 0000:00:00.0: AER: enabled with IRQ 26 [ 1.157252] loop: module loaded [ 1.158888] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac [ 1.160682] nand: Hynix H27S4G8F2EDA-BC [ 1.167445] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 [ 1.171244] 19 fixed-partitions partitions found on MTD device qcom_nand.0 [ 1.178517] Creating 19 MTD partitions on "qcom_nand.0": [ 1.185503] 0x000000000000-0x000000180000 : "0:SBL1" [ 1.192905] 0x000000180000-0x000000280000 : "0:MIBIB" [ 1.197306] 0x000000280000-0x000000600000 : "0:QSEE" [ 1.204515] 0x000000600000-0x000000680000 : "0:DEVCFG" [ 1.206817] 0x000000680000-0x000000700000 : "0:RPM" [ 1.211749] 0x000000700000-0x000000780000 : "0:CDT" [ 1.216524] 0x000000780000-0x000000800000 : "0:APPSBLENV" [ 1.221365] 0x000000800000-0x000000980000 : "0:APPSBL" [ 1.227879] 0x000000980000-0x000000a00000 : "0:ART" [ 1.231955] 0x000000a00000-0x000000a80000 : "0:ETHPHYFW" [ 1.237120] 0x000000a80000-0x000000b00000 : "u_env" [ 1.242290] 0x000000b00000-0x000000b40000 : "s_env" [ 1.246703] 0x000000b40000-0x000000b80000 : "devinfo" [ 1.251545] 0x000000b80000-0x000005d80000 : "kernel" [ 1.334426] 0x000001380000-0x000005d80000 : "rootfs" [ 1.405251] mtd: setting mtd14 (rootfs) as root device [ 1.405634] mtdsplit: no squashfs found in "rootfs" [ 1.409295] 0x000005d80000-0x00000af80000 : "alt_kernel" [ 1.492212] 0x000006580000-0x00000af80000 : "alt_rootfs" [ 1.562822] 0x00000af80000-0x00000b380000 : "sysdiag" [ 1.567159] 0x00000b380000-0x00001f080000 : "syscfg" [ 1.892459] i2c_dev: i2c /dev entries driver [ 1.897639] sdhci: Secure Digital Host Controller Interface driver [ 1.897680] sdhci: Copyright(c) Pierre Ossman [ 1.902715] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.909837] remoteproc remoteproc0: releasing cd00000.remoteproc [ 1.915283] NET: Registered PF_INET6 protocol family [ 1.919763] Segment Routing with IPv6 [ 1.923842] In-situ OAM (IOAM) with IPv6 [ 1.927446] NET: Registered PF_PACKET protocol family [ 1.931383] 8021q: 802.1Q VLAN Support v1.8 [ 1.963827] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 1.964105] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 1.969997] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 2 [ 1.976575] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 1.984210] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 1.991741] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 2.000881] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 675000 uV [ 2.007827] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 787500 uV [ 2.017811] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 850000 uV [ 2.027617] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 912500 uV [ 2.037454] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 576, quot_offset[ 7]= 0 [ 2.047237] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 765, quot_offset[ 7]= 185 [ 2.058104] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]= 861, quot_offset[ 7]= 95 [ 2.069027] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]= 946, quot_offset[ 7]= 85 [ 2.080301] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 2.084174] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 799999 KHz, changing to: 864000 KHz [ 2.099860] remoteproc remoteproc0: cd00000.remoteproc is available [ 2.108538] ubi0: attaching mtd14 [ 2.474906] random: crng init done [ 2.528728] ubi0: scanning is finished [ 2.536195] ubi0: attached mtd14 (name "rootfs", size 74 MiB) [ 2.536233] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.540927] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.547709] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.554554] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0 [ 2.561332] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 2.567578] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1735233486 [ 2.574611] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 80 [ 2.583912] ubi0: background thread "ubi_bgt0d" started, PID 592 [ 2.584694] block ubiblock0_0: created from ubi0:0(ro�[ 2.607307] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 2.607782] Freeing unused kernel memory: 1536K [ 2.613502] Run /sbin/init as init process [ 2.796775] init: Console is alive [ 2.796886] init: - watchdog - [ 3.579780] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.607613] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 3.645481] ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist [ 4.075230] __adpt_hppe_uniphy_psgmii_mode_set[1194]:INFO:uniphy 0 psgmii channel selection [ 5.084966] regi_init[2525]:INFO:Initializing CPPE Done!! [ 5.085097] regi_init[2574]:INFO:qca-ssdk module init succeeded! [ 5.092106] EDMA ver 1 hw init [ 5.095652] EDMA HW Reset completed succesfully [ 5.098307] Num rings - TxDesc:1 (23-23) TxCmpl:1 (23-23) [ 5.102708] RxDesc:1 (15-15) RxFill:1 (7-7) [ 5.108599] dp1: ppe offload disabled: 0 for macid 1 [ 5.112255] dp1: Switch attached to macid 1 status: 0 [ 5.275720] Qualcomm QCA8075 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL) [ 5.276712] GMAC2(ffffff8002bc5900) Invalid MAC@ - using b2:e8:f1:e1:86:4b [ 5.284614] dp2: ppe offload disabled: 0 for macid 2 [ 5.291490] dp2: Switch attached to macid 2 status: 0 [ 5.375277] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL) [ 5.376246] GMAC3(ffffff80034cc900) Invalid MAC@ - using aa:1f:24:29:d3:86 [ 5.384169] dp3: ppe offload disabled: 0 for macid 3 [ 5.391043] dp3: Switch attached to macid 3 status: 0 [ 5.475285] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL) [ 5.476247] GMAC4(ffffff80034cd900) Invalid MAC@ - using ee:6c:d9:f7:14:63 [ 5.484178] dp4: ppe offload disabled: 0 for macid 4 [ 5.491055] dp4: Switch attached to macid 4 status: 0 [ 5.575282] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL) [ 5.576269] GMAC5(ffffff800394a900) Invalid MAC@ - using b2:a7:96:85:8b:23 [ 5.584174] dp5: ppe offload disabled: 0 for macid 5 [ 5.591048] dp5: Switch attached to macid 5 status: 0 [ 5.596723] Generic Clause 45 PHY 90000.mdio-1:08: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:08, irq=POLL) [ 5.601805] ********************************************************** [ 5.611367] * NSS Data Plane driver [ 5.617951] ********************************************************** [ 5.634855] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 5.634924] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 5.639368] xhci-hcd xhci-hcd.1.auto: USB3 root hub has no ports [ 5.646805] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008000000010 [ 5.653076] xhci-hcd xhci-hcd.1.auto: irq 41, io mem 0x07000000 [ 5.662641] hub 1-0:1.0: USB hub found [ 5.668100] hub 1-0:1.0: 1 port detected [ 5.672212] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 5.675974] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 5.682131] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008000000010 [ 5.688848] xhci-hcd xhci-hcd.2.auto: irq 42, io mem 0x08a00000 [ 5.698345] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 5.704082] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 5.709647] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 5.717596] hub 2-0:1.0: USB hub found [ 5.723804] hub 2-0:1.0: 1 port detected [ 5.727890] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.731897] hub 3-0:1.0: USB hub found [ 5.739709] hub 3-0:1.0: 1 port detected [ 5.744553] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 5.749039] init: - preinit - [ 6.098960] mtdblock: MTD device 'devinfo' is NAND, please consider using UBI block devices instead. Cannot parse config file '/etc/fw_env.config': No such file or directory Failed to find NVMEM device Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 10.462250] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 10.462376] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 845 [ 10.501552] UBIFS (ubi0:1): recovery needed [ 10.592381] UBIFS (ubi0:1): recovery completed [ 10.592474] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 10.595730] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 10.603623] UBIFS (ubi0:1): FS size: 53837824 bytes (51 MiB, 424 LEBs), max 434 LEBs, journal size 2666496 bytes (2 MiB, 21 LEBs) [ 10.613532] UBIFS (ubi0:1): reserved for root: 2542893 bytes (2483 KiB) [ 10.625148] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 741FA97E-A45C-44CA-8868-89B94249D0D4, small LPT model [ 10.634598] mount_root: switching to ubifs overlay [ 10.647979] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 10.652324] urandom-seed: Seeding with /etc/urandom.seed [ 10.709976] procd: - early - [ 10.710065] procd: - watchdog - [ 11.256250] procd: - watchdog - [ 11.256885] procd: - ubus - [ 11.410154] procd: - init - Please press Enter to activate this console. [ 11.639550] kmodloader: loading kernel modules from /etc/modules.d/* [ 11.746451] hid: raw HID events driver (C) Jiri Kosina [ 11.757135] Bluetooth: Core ver 2.22 [ 11.757242] NET: Registered PF_BLUETOOTH protocol family [ 11.759780] Bluetooth: HCI device and connection manager initialized [ 11.765112] Bluetooth: HCI socket layer initialized [ 11.771413] Bluetooth: L2CAP socket layer initialized [ 11.776049] Bluetooth: SCO socket layer initialized [ 11.782888] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.785937] Bluetooth: BNEP filters: protocol multicast [ 11.791472] Bluetooth: BNEP socket layer initialized [ 11.799795] usbcore: registered new interface driver btusb [ 11.802056] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a [ 11.806938] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2 [ 11.815472] Bluetooth: HCI UART driver ver 2.3 [ 11.821237] Bluetooth: HCI UART protocol H4 registered [ 11.825767] Bluetooth: HCI UART protocol BCSP registered [ 11.831715] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 11.836380] Bluetooth: HIDP socket layer initialized [ 11.845503] urngd: v1.0.2 started. [ 11.851910] NET: Registered PF_QIPCRTR protocol family [ 11.854326] Bluetooth: RFCOMM TTY layer initialized [ 11.855965] Bluetooth: RFCOMM socket layer initialized [ 11.860728] Bluetooth: RFCOMM ver 1.11 [ 11.942390] PPP generic driver version 2.4.2 [ 11.943166] NET: Registered PF_PPPOX protocol family [ 11.954063] ath11k c000000.wifi: ipq6018 hw1.0 [ 11.954093] ath11k c000000.wifi: FW memory mode: 1 [ 11.984661] remoteproc remoteproc0: powering up cd00000.remoteproc [ 12.000727] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340 [ 12.928539] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up [ 12.929785] ath11k c000000.wifi: qmi ignore invalid mem req type 3 [ 12.935427] ath11k_pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit] [ 12.935588] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff [ 12.941137] ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 12.948996] ath11k c000000.wifi: fw_version 0x25008f8e fw_build_timestamp 2024-03-01 03:54 fw_build_id WLAN.HK.2.5.0.1-03982-QCAHKSWPL_SILICONZ-3 [ 12.958169] ath11k_pci 0000:01:00.0: MSI vectors: 16 [ 12.976925] ath11k_pci 0000:01:00.0: qcn9074 hw1.0 [ 12.981793] ath11k_pci 0000:01:00.0: FW memory mode: 2 [ 13.065016] ath11k c000000.wifi: qmi failed to load CAL data file:cal-ahb-c000000.wifi.bin [ 13.065075] ath11k c000000.wifi: failed to load board data file: -12 [ 13.177435] mhi mhi0: Requested to power ON [ 13.177481] mhi mhi0: Power on setup success [ 13.884907] mhi mhi0: Wait for device to enter SBL or Mission mode [ 13.936966] kmodloader: done loading kernel modules from /etc/modules.d/* [ 13.950954] ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff [ 13.951002] ath11k_pci 0000:01:00.0: fw_version 0x290b8862 fw_build_timestamp 2024-09-23 10:51 fw_build_id [ 14.057647] ath11k_pci 0000:01:00.0: qmi failed to load CAL data file:cal-pci-0000:01:00.0.bin [ 14.057714] ath11k_pci 0000:01:00.0: failed to load board data file: -12 [ 16.354027] br-lan: port 1(lan1) entered blocking state [ 16.354065] br-lan: port 1(lan1) entered disabled state [ 16.358164] nss-dp 3a001000.dp1 lan1: entered allmulticast mode [ 16.363486] nss-dp 3a001000.dp1 lan1: entered promiscuous mode [ 16.374238] br-lan: port 2(lan2) entered blocking state [ 16.375096] br-lan: port 2(lan2) entered disabled state [ 16.380227] nss-dp 3a001200.dp2 lan2: entered allmulticast mode [ 16.385655] nss-dp 3a001200.dp2 lan2: entered promiscuous mode [ 16.393588] br-lan: port 3(lan3) entered blocking state [ 16.397265] br-lan: port 3(lan3) entered disabled state [ 16.402366] nss-dp 3a001400.dp3 lan3: entered allmulticast mode [ 16.407769] nss-dp 3a001400.dp3 lan3: entered promiscuous mode [ 16.415983] br-lan: port 4(lan4) entered blocking state [ 16.419353] br-lan: port 4(lan4) entered disabled state [ 16.424499] nss-dp 3a001600.dp4 lan4: entered allmulticast mode [ 16.430022] nss-dp 3a001600.dp4 lan4: entered promiscuous mode [ 19.525267] nss-dp 3a001600.dp4 lan4: PHY Link up speed: 1000 [ 19.525315] br-lan: port 4(lan4) entered blocking state [ 19.529998] br-lan: port 4(lan4) entered forwarding state [ 19.924906] _adpt_hppe_instance0_mode_get[2299]:ERROR:when the port_interface_mode of port 4 is 5, mode0:0 cannot be supported -
Dec 26, 2024 . 1 changed file with 294 additions and 484 deletions.There are no files selected for viewing
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode charactersOriginal file line number Diff line number Diff line change @@ -1,164 +1,13 @@ [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014] [ 0.000000] Linux version 6.6.67 (pppig@gentoolinux) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28363+29-f10ee1e209) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Thu Dec 26 07:32:18 2024 [ 0.000000] Machine model: Linksys MR7500 [ 0.000000] OF: reserved mem: 0x0000000000060000..0x0000000000065fff (24 KiB) nomap non-reusable memory@60000 [ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable memory@40000000 [ 0.000000] OF: reserved mem: 0x000000004a100000..0x000000004a4fffff (4096 KiB) nomap non-reusable bootloader@4a100000 [ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable memory@4a600000 [ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable memory@4aa00000 [ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004fffffff (87040 KiB) nomap non-reusable memory@4ab00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] DMA32 empty @@ -181,346 +30,307 @@ Jumping to AARCH64 kernel via monitor [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: init=/sbin/init rootfstype=squashfs ubi.mtd=rootfs root=mtd:squashfs rootwait root=/dev/ubiblock0_0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.000000] software IO TLB: mapped [mem 0x000000005f4c0000-0x000000005f5c0000] (1MB) [ 0.000000] Memory: 386936K/524288K available (8128K kernel code, 902K rwdata, 2396K rodata, 1536K init, 276K bss, 137352K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000072] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000086] pid_max: default: 32768 minimum: 301 [ 0.005234] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.005246] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.009478] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.009692] rcu: Hierarchical SRCU implementation. [ 0.009696] rcu: Max phase no-delay instances is 1000. [ 0.010484] smp: Bringing up secondary CPUs ... [ 0.011136] Detected VIPT I-cache on CPU1 [ 0.011233] CPU1: Booted secondary processor 0x0000000001 [0x51af8014] [ 0.011879] Detected VIPT I-cache on CPU2 [ 0.011948] CPU2: Booted secondary processor 0x0000000002 [0x51af8014] [ 0.012601] Detected VIPT I-cache on CPU3 [ 0.012666] CPU3: Booted secondary processor 0x0000000003 [0x51af8014] [ 0.012733] smp: Brought up 1 node, 4 CPUs [ 0.012742] SMP: Total of 4 processors activated. [ 0.012747] CPU features: detected: 32-bit EL0 Support [ 0.012752] CPU features: detected: CRC32 instructions [ 0.012815] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.012822] CPU: All CPU(s) started at EL1 [ 0.012825] alternatives: applying system-wide alternatives [ 0.021434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021459] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.023186] pinctrl core: initialized pinctrl subsystem [ 0.025227] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.025813] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.025850] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.025882] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.026255] thermal_sys: Registered thermal governor 'step_wise' [ 0.026311] cpuidle: using governor menu [ 0.026548] ASID allocator initialised with 65536 entries [ 0.032952] /soc@0/interrupt-controller@b000000: Fixed dependency cycle(s) with /soc@0/interrupt-controller@b000000 [ 0.073475] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.075934] Modules: 29424 pages in range for non-PLT usage [ 0.075942] Modules: 520944 pages in range for PLT usage [ 0.081213] SCSI subsystem initialized [ 0.081453] usbcore: registered new interface driver usbfs [ 0.081502] usbcore: registered new interface driver hub [ 0.081555] usbcore: registered new device driver usb [ 0.081826] qcom_scm: convention: smc arm 64 [ 0.083139] s2: Bringing 0uV into 725000-725000uV [ 0.083943] clocksource: Switched to clocksource arch_sys_counter [ 0.084228] l2: Bringing 0uV into 1800000-1800000uV [ 0.084380] qcom_rpm_smd_regulator remoteproc:glink-edge:rpm-requests:regulators: Supply for l2 (l2) resolved to itself [ 0.087726] NET: Registered PF_INET protocol family [ 0.087863] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.089964] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.089982] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.089997] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.090044] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.090184] TCP: Hash tables configured (established 4096 bind 4096) [ 0.090675] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear) [ 0.090854] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.090880] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.091351] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.091389] PCI: CLS 0 bytes, default 64 [ 0.092935] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.093519] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.093527] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.101274] qcom-qmp-usb-phy 78000.ssphy: supply vdda-phy not found, using dummy regulator [ 0.101428] qcom-qmp-usb-phy 78000.ssphy: supply vdda-pll not found, using dummy regulator [ 0.103166] qcom-qusb2-phy 79000.qusb: supply vdda-pll not found, using dummy regulator [ 0.103325] qcom-qusb2-phy 79000.qusb: supply vdda-phy-dpdm not found, using dummy regulator [ 0.103506] qcom-qusb2-phy 79000.qusb: Registered Qcom-QUSB2 phy [ 0.105333] qcom-pcie 20000000.pci: host bridge /soc@0/pci@20000000 ranges: [ 0.105391] qcom-pcie 20000000.pci: IO 0x0020200000..0x002020ffff -> 0x0000000000 [ 0.105430] qcom-pcie 20000000.pci: MEM 0x0020220000..0x002fffffff -> 0x0020220000 [ 0.112671] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.113584] msm_serial 78b0000.serial: msm_serial: detected port #1 [ 0.113621] msm_serial 78b0000.serial: uartclk = 24000000 [ 0.113926] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 22, base_baud = 1500000) is a MSM [ 0.114257] msm_serial 78b1000.serial: msm_serial: detected port #0 [ 0.114286] msm_serial 78b1000.serial: uartclk = 1843199 [ 0.114589] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 23, base_baud = 115199) is a MSM [ 0.114620] msm_serial: console setup on port #0 [ 0.114687] printk: console [ttyMSM0] enabled [ 0.245669] qcom-pcie 20000000.pci: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 1024G [ 0.250686] msm_serial: driver initialized [ 0.963068] loop: module loaded [ 0.964420] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac [ 0.965022] nand: Hynix H27S4G8F2EDA-BC [ 0.971613] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 [ 1.000912] mdio_bus 90000.mdio-1: MDIO device at address 8 is missing. [ 1.001282] i2c_dev: i2c /dev entries driver [ 1.012322] sdhci: Secure Digital Host Controller Interface driver [ 1.012366] sdhci: Copyright(c) Pierre Ossman [ 1.017421] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.024955] remoteproc remoteproc0: releasing cd00000.remoteproc [ 1.030931] NET: Registered PF_INET6 protocol family [ 1.034882] Segment Routing with IPv6 [ 1.038533] In-situ OAM (IOAM) with IPv6 [ 1.042120] NET: Registered PF_PACKET protocol family [ 1.046086] 8021q: 802.1Q VLAN Support v1.8 [ 1.081794] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 1.082148] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 1.087967] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 2 [ 1.094544] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 1.102177] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 1.109703] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 1.118847] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 675000 uV [ 1.125790] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 787500 uV [ 1.135761] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 850000 uV [ 1.145570] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 912500 uV [ 1.155412] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 576, quot_offset[ 7]= 0 [ 1.165191] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 765, quot_offset[ 7]= 185 [ 1.176040] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]= 861, quot_offset[ 7]= 95 [ 1.186977] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]= 946, quot_offset[ 7]= 85 [ 1.198223] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 1.200711] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac [ 1.215642] nand: Hynix H27S4G8F2EDA-BC [ 1.222025] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 [ 1.226099] 20 qcomsmem partitions found on MTD device qcom_nand.0 [ 1.233232] Creating 20 MTD partitions on "qcom_nand.0": [ 1.239494] 0x000000000000-0x000000180000 : "0:sbl1" [ 1.246923] 0x000000180000-0x000000280000 : "0:mibib" [ 1.251312] 0x000000280000-0x000000600000 : "0:qsee" [ 1.254874] qcom-pcie 20000000.pci: Phy link never came up [ 1.258525] 0x000000600000-0x000000680000 : "0:devcfg" [ 1.260169] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00 [ 1.266229] 0x000000680000-0x000000700000 : "0:rpm" [ 1.270301] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.277404] 0x000000700000-0x000000780000 : "0:cdt" [ 1.281233] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.287716] 0x000000780000-0x000000800000 : "0:appsblenv" [ 1.291564] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff] [ 1.298781] 0x000000800000-0x000000980000 : "0:appsbl" [ 1.303316] pci 0000:00:00.0: [17cb:1003] type 01 class 0x060400 [ 1.311934] 0x000000980000-0x000000a00000 : "0:art" [ 1.315192] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 1.322293] 0x000000a00000-0x000000a80000 : "0:ethphyfw" [ 1.326024] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.333160] 0x000000a80000-0x000000b00000 : "u_env" [ 1.340748] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff] [ 1.344783] 0x000000b00000-0x000000b40000 : "s_env" [ 1.348449] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.356175] 0x000000b40000-0x000000b80000 : "devinfo" [ 1.362606] pcieport 0000:00:00.0: PME: Signaling with IRQ 31 [ 1.366059] 0x000000b80000-0x000001380000 : "kernel" [ 1.370763] pcieport 0000:00:00.0: AER: enabled with IRQ 31 [ 1.384250] 0x000001380000-0x000005d80000 : "rootfs" [ 1.454626] mtd: setting mtd14 (rootfs) as root device [ 1.455008] mtdsplit: no squashfs found in "rootfs" [ 1.458725] 0x000005d80000-0x000006580000 : "alt_kernel" [ 1.471154] 0x000006580000-0x00000af80000 : "alt_rootfs" [ 1.539440] 0x00000af80000-0x00000b380000 : "sysdiag" [ 1.543709] 0x00000b380000-0x00001f080000 : "syscfg" [ 1.840402] 0x00001f080000-0x00001f580000 : "app_data" [ 1.854497] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 799999 KHz, changing to: 864000 KHz [ 1.857527] remoteproc remoteproc0: cd00000.remoteproc is available [ 1.864578] ubi0: attaching mtd14 [ 2.287393] ubi0: scanning is finished [ 2.294605] ubi0: attached mtd14 (name "rootfs", size 74 MiB) [ 2.294640] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.299332] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.306121] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.312960] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0 [ 2.319735] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 2.325987] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1735198338 [ 2.333017] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 80 [ 2.342318] ubi0: background thread "ubi_bgt0d" started, PID 600 [ 2.343075] block ubiblock0_0: created from ubi0:0(ro[ 2.365978] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 2.366472] Freeing unused kernel memory: 1536K [ 2.372182] Run /sbin/init as init process [ 2.527792] init: Console is alive [ 2.527922] init: - watchdog - [ 2.613975] random: crng init done [ 3.110832] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.143351] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 3.180289] ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist [ 3.594355] __adpt_hppe_uniphy_psgmii_mode_set[1194]:INFO:uniphy 0 psgmii channel selection [ 3.719039] regi_init[2525]:INFO:Initializing CPPE Done!! [ 3.719128] regi_init[2574]:INFO:qca-ssdk module init succeeded! [ 3.726159] EDMA ver 1 hw init [ 3.729703] EDMA HW Reset completed succesfully [ 3.732372] Num rings - TxDesc:1 (23-23) TxCmpl:1 (23-23) [ 3.736789] RxDesc:1 (15-15) RxFill:1 (7-7) [ 3.742607] dp1: ppe offload disabled: 0 for macid 1 [ 3.746329] dp1: Switch attached to macid 1 status: 0 [ 3.824067] nss-dp 3a001000.dp1 lan1 (uninitialized): failed to connect to phy device [ 3.863947] nss-dp: probe of 3a001000.dp1 failed with error -14 [ 3.864086] GMAC2(ffffff8002e51900) Invalid MAC@ - using 32:f9:f4:25:9e:77 [ 3.868668] dp2: ppe offload disabled: 0 for macid 2 [ 3.875616] dp2: Switch attached to macid 2 status: 0 [ 3.954779] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL) [ 3.955804] GMAC3(ffffff8002e52900) Invalid MAC@ - using 0e:7a:bf:3e:eb:5b [ 3.963669] dp3: ppe offload disabled: 0 for macid 3 [ 3.970536] dp3: Switch attached to macid 3 status: 0 [ 4.044719] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL) [ 4.045778] GMAC4(ffffff8002fb7900) Invalid MAC@ - using 02:01:8c:73:c8:ea [ 4.053632] dp4: ppe offload disabled: 0 for macid 4 [ 4.060488] dp4: Switch attached to macid 4 status: 0 [ 4.144705] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL) [ 4.145745] nss-dp: probe of soc@0:dp5-syn@3a003000 failed with error -14 [ 4.153681] ********************************************************** [ 4.160469] * NSS Data Plane driver [ 4.166888] ********************************************************** [ 4.182254] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 4.182299] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 4.187547] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008000000010 [ 4.194229] xhci-hcd xhci-hcd.1.auto: irq 42, io mem 0x08a00000 [ 4.203659] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 4.209474] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 4.215031] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 4.222992] hub 1-0:1.0: USB hub found [ 4.229249] hub 1-0:1.0: 1 port detected [ 4.233166] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.237330] hub 2-0:1.0: USB hub found [ 4.245083] hub 2-0:1.0: 1 port detected [ 4.249790] leds-gpio: probe of leds failed with error -16 [ 4.253813] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.264588] init: - preinit - Cannot parse config file '/etc/fw_env.config': No such file or directory Failed to find NVMEM device Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 8.905006] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 8.905123] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 812 [ 8.943526] UBIFS (ubi0:1): recovery needed [ 9.034033] UBIFS (ubi0:1): recovery completed [ 9.034135] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 9.037379] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 9.045301] UBIFS (ubi0:1): FS size: 56377344 bytes (53 MiB, 444 LEBs), max 454 LEBs, journal size 2793472 bytes (2 MiB, 22 LEBs) [ 9.055188] UBIFS (ubi0:1): reserved for root: 2662841 bytes (2600 KiB) [ 9.066812] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 8739E5B7-A0A9-4308-B8D5-B0B096DAB02F, small LPT model [ 9.076142] mount_root: switching to ubifs overlay [ 9.089280] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 9.093078] urandom-seed: Seeding with /etc/urandom.seed [ 9.147871] procd: - early - [ 9.147961] procd: - watchdog - [ 9.693756] procd: - watchdog - [ 9.694397] procd: - ubus - [ 9.847225] procd: - init - Please press Enter to activate this console. [ 10.076734] kmodloader: loading kernel modules from /etc/modules.d/* [ 10.174016] Loading modules backported from Linux version v6.11.2-0-g7aa21fec187b [ 10.174054] Backport generated by backports.git v6.1.110-1-32-gc61f71fe0942 [ 10.186200] NET: Registered PF_QIPCRTR protocol family [ 10.262067] PPP generic driver version 2.4.2 [ 10.262706] NET: Registered PF_PPPOX protocol family [ 10.271402] urngd: v1.0.2 started. [ 10.274325] ath11k c000000.wifi: ipq6018 hw1.0 [ 10.274355] ath11k c000000.wifi: FW memory mode: 1 [ 10.303896] remoteproc remoteproc0: powering up cd00000.remoteproc [ 10.322557] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340 [ 11.248218] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up [ 11.249726] ath11k c000000.wifi: qmi ignore invalid mem req type 3 [ 11.255231] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff [ 11.260769] ath11k c000000.wifi: fw_version 0x25008f8e fw_build_timestamp 2024-03-01 03:54 fw_build_id WLAN.HK.2.5.0.1-03982-QCAHKSWPL_SILICONZ-3 [ 11.269760] kmodloader: done loading kernel modules from /etc/modules.d/* [ 11.281007] ath11k c000000.wifi: found invalid board magic [ 11.289253] ath11k c000000.wifi: found invalid board magic [ 11.294541] ath11k c000000.wifi: found invalid board magic [ 11.322585] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255,variant=Linksys-MR7500 from ath11k/IPQ6018/hw1.0/board-2.bin [ 11.322642] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255 from ath11k/IPQ6018/hw1.0/board-2.bin [ 11.336051] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255 from ath11k/IPQ6018/hw1.0/board-2.bin [ 11.348882] ath11k c000000.wifi: failed to fetch board.bin from IPQ6018/hw1.0 [ 11.361449] ath11k c000000.wifi: qmi failed to fetch board file: -12 [ 11.368505] ath11k c000000.wifi: failed to load board data file: -12 [ 13.601655] br-lan: port 1(lan2) entered blocking state [ 13.601695] br-lan: port 1(lan2) entered disabled state [ 13.605798] nss-dp 3a001200.dp2 lan2: entered allmulticast mode [ 13.611141] nss-dp 3a001200.dp2 lan2: entered promiscuous mode [ 13.627640] br-lan: port 2(lan3) entered blocking state [ 13.627685] br-lan: port 2(lan3) entered disabled state [ 13.631720] nss-dp 3a001400.dp3 lan3: entered allmulticast mode [ 13.637110] nss-dp 3a001400.dp3 lan3: entered promiscuous mode [ 13.647071] br-lan: port 3(lan4) entered blocking state [ 13.648699] br-lan: port 3(lan4) entered disabled state [ 13.653849] nss-dp 3a001600.dp4 lan4: entered allmulticast mode [ 13.659251] nss-dp 3a001600.dp4 lan4: entered promiscuous mode [ 14.644431] hsl_phy_phydev_get[776]:ERROR:phy_addr 8 phydev is NULL [ 15.684483] hsl_phy_phydev_get[776]:ERROR:phy_addr 8 phydev is NULL [ 16.724356] hsl_phy_phydev_get[776]:ERROR:phy_addr 8 phydev is NULL [ 17.763951] hsl_phy_phydev_get[776]:ERROR:phy_addr 8 phydev is NULL [ 18.804486] hsl_phy_phydev_get[776]:ERROR:phy_addr 8 phydev is NULL [ 19.844334] hsl_phy_phydev_get[776]:ERROR:phy_addr 8 phydev is NULL [ 20.884333] hsl_phy_phydev_get[776]:ERROR:phy_addr 8 phydev is NULL [ 21.604462] platform 7000000.usb: deferred probe pending [ 21.924469] hsl_phy_phydev_get[776]:ERROR:phy_addr 8 phydev is NULL [ 22.964348] hsl_phy_phydev_get[776]:ERROR:phy_addr 8 phydev is NULL [ 24.003949] hsl_phy_phydev_get[776]:ERROR:phy_addr 8 phydev is NULL [ 25.043959] hsl_phy_phydev_get[776]:ERROR:phy_addr 8 phydev is NULL [ 26.083956] hsl_phy_phydev_get[776]:ERROR:phy_addr 8 phydev is NULL -
Dec 24, 2024 . 1 changed file with 380 additions and 323 deletions.There are no files selected for viewing
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode charactersOriginal file line number Diff line number Diff line change @@ -1,4 +1,3 @@ Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00098-IPQ60xxLZB-1 @@ -22,57 +21,57 @@ B - 592 - bootable_media_detect_entry, Start B - 4339 - bootable_media_detect_success, Start B - 5207 - elf_loader_entry, Start B - 5380 - auth_hash_seg_entry, Start B - 7847 - auth_hash_seg_exit, Start B - 8344 - elf_segs_hash_verify_entry, Start B - 103705 - elf_segs_hash_verify_exit, Start B - 107895 - auth_xbl_sec_hash_seg_entry, Start B - 108040 - auth_xbl_sec_hash_seg_exit, Start B - 114590 - xbl_sec_segs_hash_verify_entry, Start B - 114591 - xbl_sec_segs_hash_verify_exit, Start B - 115521 - PBL, End B - 97447 - SBL1, Start B - 237351 - GCC [RstStat:0x10, RstDbg:0x700100] WDog Stat : 0x4 B - 239791 - clock_init, Start D - 3538 - clock_init, Delta B - 249490 - boot_flash_init, Start D - 26230 - boot_flash_init, Delta B - 277977 - sbl1_ddr_set_default_params, Start D - 274 - sbl1_ddr_set_default_params, Delta B - 284595 - boot_config_data_table_init, Start D - 4819 - boot_config_data_table_init, Delta - (575 Bytes) B - 294599 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:0,Subtype:2 B - 299266 - Image Load, Start D - 6619 - OEM_MISC Image Loaded, Delta - (0 Bytes) B - 308599 - Image Load, Start D - 5063 - PMIC Image Loaded, Delta - (0 Bytes) B - 316468 - sbl1_ddr_set_params, Start B - 321470 - CPR configuration: 0x366 B - 324642 - Pre_DDR_clock_init, Start D - 213 - Pre_DDR_clock_init, Delta D - 0 - sbl1_ddr_set_params, Delta B - 359717 - Image Load, Start D - 518 - APDP Image Loaded, Delta - (0 Bytes) B - 378596 - Image Load, Start D - 519 - QTI_MISC Image Loaded, Delta - (0 Bytes) B - 381128 - Image Load, Start D - 824 - Auth Metadata D - 732 - Segments hash check D - 23119 - QSEE Dev Config Image Loaded, Delta - (36490 Bytes) B - 406199 - Image Load, Start D - 6557 - Auth Metadata D - 10431 - Segments hash check D - 347425 - QSEE Image Loaded, Delta - (1436620 Bytes) B - 754173 - Image Load, Start D - 732 - Auth Metadata D - 1006 - Segments hash check D - 35899 - RPM Image Loaded, Delta - (102800 Bytes) B - 791719 - Image Load, Start D - 671 - Auth Metadata D - 3202 - Segments hash check D - 130601 - APPSBL Image Loaded, Delta - (568944 Bytes) B - 939674 - SBL1, End D - 842624 - SBL1, Delta S - Flash Throughput, 4000 KB/s (2145429 Bytes, 454197 us) S - Core 0 Frequency, 800 MHz S - DDR Frequency, 466 MHz @@ -119,47 +118,47 @@ NAND read: device 0 offset 0x5d80000, size 0x800000 Type: Kernel Image Compression: gzip compressed Data Start: 0x440000e8 Data Size: 5162610 Bytes = 4.9 MiB Architecture: AArch64 OS: Linux Load Address: 0x41000000 Entry Point: 0x41000000 Hash algo: crc32 Hash value: 0b6d1d26 Hash algo: sha1 Hash value: 894a72f9fd3a21b4698343bde2b2bf8c06272f35 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt from FIT Image at 44000000 ... Using 'config@1' configuration Trying 'fdt-1' fdt subimage Description: ARM64 OpenWrt linksys_mr7500 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x444ec89c Data Size: 36166 Bytes = 35.3 KiB Architecture: AArch64 Hash algo: crc32 Hash value: ffa78c2c Hash algo: sha1 Hash value: 91505db2660faf4a9a12ba8438997b0482f2ff87 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x444ec89c Uncompressing Kernel Image ... OK Loading Device Tree to 484f4000, end 484ffd45 ... OK Using machid 0x8030002 from environment Starting kernel ... Jumping to AARCH64 kernel via monitor [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014] [ 0.000000] Linux version 6.6.67 (pppig@gentoolinux) (aarch64-openwrt-linux-m usl-gcc (OpenWrt GCC 13.3.0 r28363+17-f10ee1e209) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Tue Dec 24 17:01:43 2024 [ 0.000000] Machine model: Linksys MR7500 [ 0.000000] OF: reserved mem: 0x0000000000060000..0x0000000000065fff (24 KiB) nomap non-reusable memory@60000 [ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 K iB) nomap non-reusable memory@40000000 [ 0.000000] OF: reserved mem: 0x000000004a100000..0x000000004a4fffff (4096 Ki B) nomap non-reusable bootloader@4a100000 [ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 Ki B) nomap non-reusable memory@4a600000 [ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 Ki B) nomap non-reusable memory@4aa00000 [ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004fffffff (87040 K iB) nomap non-reusable memory@4ab00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] DMA32 empty @@ -182,288 +181,346 @@ Jumping to AARCH64 kernel via monitor [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: init=/sbin/init rootfstype=squashfs ubi.mtd= alt_rootfs root=mtd:squashfs rootwait root=/dev/ubiblock0_0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, l inear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, li near) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.000000] software IO TLB: mapped [mem 0x000000005f4c0000-0x000000005f5c000 0] (1MB) [ 0.000000] Memory: 387000K/524288K available (8064K kernel code, 902K rwdata , 2396K rodata, 1536K init, 276K bss, 137288K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt ). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 43980 46511097ns [ 0.000071] Calibrating delay loop (skipped), value calculated using timer fr equency.. 48.00 BogoMIPS (lpj=240000) [ 0.000084] pid_max: default: 32768 minimum: 301 [ 0.005155] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linea r) [ 0.005167] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.009398] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adju st=1 rcu_task_cpu_ids=4. [ 0.009617] rcu: Hierarchical SRCU implementation. [ 0.009621] rcu: Max phase no-delay instances is 1000. [ 0.010416] smp: Bringing up secondary CPUs ... [ 0.011075] Detected VIPT I-cache on CPU1 [ 0.011175] CPU1: Booted secondary processor 0x0000000001 [0x51af8014] [ 0.011831] Detected VIPT I-cache on CPU2 [ 0.011900] CPU2: Booted secondary processor 0x0000000002 [0x51af8014] [ 0.012562] Detected VIPT I-cache on CPU3 [ 0.012626] CPU3: Booted secondary processor 0x0000000003 [0x51af8014] [ 0.012694] smp: Brought up 1 node, 4 CPUs [ 0.012703] SMP: Total of 4 processors activated. [ 0.012708] CPU features: detected: 32-bit EL0 Support [ 0.012713] CPU features: detected: CRC32 instructions [ 0.012778] CPU features: emulated: Privileged Access Never (PAN) using TTBR0 _EL1 switching [ 0.012784] CPU: All CPU(s) started at EL1 [ 0.012787] alternatives: applying system-wide alternatives [ 0.021059] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.021084] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.022816] pinctrl core: initialized pinctrl subsystem [ 0.024839] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.025430] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.025468] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allo cations [ 0.025501] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic al locations [ 0.025900] thermal_sys: Registered thermal governor 'step_wise' [ 0.025956] cpuidle: using governor menu [ 0.026169] ASID allocator initialised with 65536 entries [ 0.032440] /soc@0/interrupt-controller@b000000: Fixed dependency cycle(s) wi th /soc@0/interrupt-controller@b000000 [ 0.073306] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.075448] Modules: 29440 pages in range for non-PLT usage [ 0.075456] Modules: 520960 pages in range for PLT usage [ 0.080537] SCSI subsystem initialized [ 0.080745] usbcore: registered new interface driver usbfs [ 0.080792] usbcore: registered new interface driver hub [ 0.080841] usbcore: registered new device driver usb [ 0.081121] qcom_scm: convention: smc arm 64 [ 0.082457] s2: Bringing 0uV into 725000-725000uV [ 0.083219] clocksource: Switched to clocksource arch_sys_counter [ 0.083576] l2: Bringing 0uV into 1800000-1800000uV [ 0.083748] qcom_rpm_smd_regulator remoteproc:glink-edge:rpm-requests:regulat ors: Supply for l2 (l2) resolved to itself [ 0.087124] NET: Registered PF_INET protocol family [ 0.087263] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear ) [ 0.089358] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.089376] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.089391] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.089439] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear ) [ 0.089579] TCP: Hash tables configured (established 4096 bind 4096) [ 0.090051] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linea r) [ 0.090221] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.090257] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.090673] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.090710] PCI: CLS 0 bytes, default 64 [ 0.092207] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.092768] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.092775] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc. [ 0.100351] qcom-qmp-usb-phy 78000.ssphy: supply vdda-phy not found, using du mmy regulator [ 0.100517] qcom-qmp-usb-phy 78000.ssphy: supply vdda-pll not found, using du mmy regulator [ 0.102110] qcom-qusb2-phy 79000.qusb: supply vdd not found, using dummy regu lator [ 0.102274] qcom-qusb2-phy 79000.qusb: supply vdda-pll not found, using dummy regulator [ 0.102317] qcom-qusb2-phy 79000.qusb: supply vdda-phy-dpdm not found, using dummy regulator [ 0.102501] qcom-qusb2-phy 79000.qusb: Registered Qcom-QUSB2 phy [ 0.104194] qcom-pcie 20000000.pci: host bridge /soc@0/pci@20000000 ranges: [ 0.104252] qcom-pcie 20000000.pci: IO 0x0020200000..0x002020ffff -> 0x 0000000000 [ 0.104292] qcom-pcie 20000000.pci: MEM 0x0020220000..0x002fffffff -> 0x 0020220000 [ 0.111528] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.112430] msm_serial 78b0000.serial: msm_serial: detected port #1 [ 0.112468] msm_serial 78b0000.serial: uartclk = 24000000 [ 0.112773] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 22, base_baud = 1500000) is a MSM [ 0.113107] msm_serial 78b1000.serial: msm_serial: detected port #0 [ 0.113137] msm_serial 78b1000.serial: uartclk = 1843199 [ 0.113478] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 23, base_baud = 115199) is a MSM [ 0.113512] msm_serial: console setup on port #0 [ 0.113584] printk: console [ttyMSM0] enabled [ 0.234939] qcom-pcie 20000000.pci: iATU: unroll T, 8 ob, 8 ib, align 4K, lim it 1024G [ 0.237069] msm_serial: driver initialized [ 0.969679] loop: module loaded [ 0.971012] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac [ 0.971634] nand: Hynix H27S4G8F2EDA-BC [ 0.978403] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 128 [ 1.007446] mdio_bus 90000.mdio-1: MDIO device at address 8 is missing. [ 1.007825] i2c_dev: i2c /dev entries driver [ 1.018918] sdhci: Secure Digital Host Controller Interface driver [ 1.018960] sdhci: Copyright(c) Pierre Ossman [ 1.024049] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.031550] remoteproc remoteproc0: releasing cd00000.remoteproc [ 1.037554] NET: Registered PF_INET6 protocol family [ 1.041305] Segment Routing with IPv6 [ 1.045173] In-situ OAM (IOAM) with IPv6 [ 1.048715] NET: Registered PF_PACKET protocol family [ 1.052681] 8021q: 802.1Q VLAN Support v1.8 [ 1.088767] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 1.089091] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 1.094931] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 2 [ 1.101490] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 1.109190] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 1.116679] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 1.125810] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 675000 uV [ 1.132744] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 787500 uV [ 1.142734] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 850000 uV [ 1.152548] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 912500 uV [ 1.162376] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 576, quot_offset[ 7]= 0 [ 1.172162] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 765, quot_offset[ 7]= 185 [ 1.183012] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]= 861, quot_offset[ 7]= 95 [ 1.193949] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]= 946, quot_offset[ 7]= 85 [ 1.205200] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 1.207622] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac [ 1.222581] nand: Hynix H27S4G8F2EDA-BC [ 1.229008] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 128 [ 1.232977] 20 qcomsmem partitions found on MTD device qcom_nand.0 [ 1.233228] qcom-pcie 20000000.pci: Phy link never came up [ 1.240227] Creating 20 MTD partitions on "qcom_nand.0": [ 1.246872] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00 [ 1.251921] 0x000000000000-0x000000180000 : "0:sbl1" [ 1.257404] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.265339] 0x000000180000-0x000000280000 : "0:mibib" [ 1.268500] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.275231] 0x000000280000-0x000000600000 : "0:qsee" [ 1.278918] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff] [ 1.288718] 0x000000600000-0x000000680000 : "0:devcfg" [ 1.290149] pci 0000:00:00.0: [17cb:1003] type 01 class 0x060400 [ 1.297754] 0x000000680000-0x000000700000 : "0:rpm" [ 1.301932] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 1.309067] 0x000000700000-0x000000780000 : "0:cdt" [ 1.312758] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.319912] 0x000000780000-0x000000800000 : "0:appsblenv" [ 1.326658] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff] [ 1.331040] 0x000000800000-0x000000980000 : "0:appsbl" [ 1.335452] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.344130] 0x000000980000-0x000000a00000 : "0:art" [ 1.349779] pcieport 0000:00:00.0: PME: Signaling with IRQ 31 [ 1.353397] 0x000000a00000-0x000000a80000 : "0:ethphyfw" [ 1.357534] pcieport 0000:00:00.0: AER: enabled with IRQ 31 [ 1.364135] 0x000000a80000-0x000000b00000 : "u_env" [ 1.374892] 0x000000b00000-0x000000b40000 : "s_env" [ 1.379365] 0x000000b40000-0x000000b80000 : "devinfo" [ 1.384463] 0x000000b80000-0x000001380000 : "kernel" [ 1.396692] 0x000001380000-0x000005d80000 : "rootfs" [ 1.466120] mtd: setting mtd14 (rootfs) as root device [ 1.466479] mtdsplit: no squashfs found in "rootfs" [ 1.470213] 0x000005d80000-0x000006580000 : "alt_kernel" [ 1.483043] 0x000006580000-0x00000af80000 : "alt_rootfs" [ 1.553884] 0x00000af80000-0x00000b380000 : "sysdiag" [ 1.558250] 0x00000b380000-0x00001f080000 : "syscfg" [ 1.859481] 0x00001f080000-0x00001f580000 : "app_data" [ 1.873606] cpufreq: cpufreq_online: CPU0: Running at unlisted initial freque ncy: 799999 KHz, changing to: 864000 KHz [ 1.876361] remoteproc remoteproc0: cd00000.remoteproc is available [ 1.883642] ubi0: attaching mtd16 [ 2.172411] ubi0: scanning is finished [ 2.197544] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 407 LEBs [ 2.198019] ubi0: attached mtd16 (name "alt_rootfs", size 74 MiB) [ 2.202967] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.209150] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.215908] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.222759] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0 [ 2.229532] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 12 8 [ 2.235788] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequ ence number: 1735059703 [ 2.242816] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 80 [ 2.252116] ubi0: background thread "ubi_bgt0d" started, PID 593 [ 2.261688] block ubiblock0_0: created from ubi0:0(ro▒[ 2.293180] VFS: Mou nted root (squashfs filesystem) readonly on device 254:0. [ 2.293777] Freeing unused kernel memory: 1536K [ 2.299428] Run /sbin/init as init process [ 2.761621] init: Console is alive [ 2.761797] init: - watchdog - [ 2.783242] random: crng init done [ 3.914620] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.961896] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 4.004134] ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist [ 4.423616] __adpt_hppe_uniphy_psgmii_mode_set[1194]:INFO:uniphy 0 psgmii cha nnel selection [ 4.548339] regi_init[2525]:INFO:Initializing CPPE Done!! [ 4.548442] regi_init[2574]:INFO:qca-ssdk module init succeeded! [ 4.554900] EDMA ver 1 hw init [ 4.559003] EDMA HW Reset completed succesfully [ 4.561674] Num rings - TxDesc:1 (23-23) TxCmpl:1 (23-23) [ 4.566106] RxDesc:1 (15-15) RxFill:1 (7-7) [ 4.571946] GMAC1(ffffff8002dc78c0) Invalid MAC@ - using 16:4c:cb:de:37:ca [ 4.575640] dp1: ppe offload disabled: 0 for macid 1 [ 4.582568] dp1: Switch attached to macid 1 status: 0 [ 4.663350] nss-dp 3a001000.dp1 lan1 (uninitialized): failed to connect to ph y device [ 4.703227] nss-dp: probe of 3a001000.dp1 failed with error -14 [ 4.703369] GMAC2(ffffff80031bf8c0) Invalid MAC@ - using 06:e7:8c:47:0f:04 [ 4.707948] dp2: ppe offload disabled: 0 for macid 2 [ 4.714916] dp2: Switch attached to macid 2 status: 0 [ 4.794065] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:ph y_addr=90000.mdio-1:01, irq=POLL) [ 4.795139] GMAC3(ffffff80041fb8c0) Invalid MAC@ - using 32:fc:d7:7e:f7:a2 [ 4.802979] dp3: ppe offload disabled: 0 for macid 3 [ 4.809846] dp3: Switch attached to macid 3 status: 0 [ 4.894036] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:ph y_addr=90000.mdio-1:02, irq=POLL) [ 4.895050] GMAC4(ffffff80041f98c0) Invalid MAC@ - using 32:b1:4d:5b:34:78 [ 4.902930] dp4: ppe offload disabled: 0 for macid 4 [ 4.909814] dp4: Switch attached to macid 4 status: 0 [ 4.994058] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:ph y_addr=90000.mdio-1:03, irq=POLL) [ 4.995063] GMAC5(ffffff80040a38c0) Invalid MAC@ - using 7a:c6:ec:f6:34:a6 [ 5.002952] dp5: ppe offload disabled: 0 for macid 5 [ 5.009850] dp5: Switch attached to macid 5 status: 0 [ 5.014971] nss-dp 3a001800.dp5 wan (uninitialized): failed to connect to phy device [ 5.019894] nss-dp: probe of 3a001800.dp5 failed with error -14 [ 5.027786] ********************************************************** [ 5.033355] * NSS Data Plane driver [ 5.039922] ********************************************************** [ 5.057664] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 5.057709] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus nu mber 1 [ 5.062932] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008000000010 [ 5.069655] xhci-hcd xhci-hcd.1.auto: irq 42, io mem 0x08a00000 [ 5.079072] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 5.084882] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus nu mber 2 [ 5.090436] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 5.098419] hub 1-0:1.0: USB hub found [ 5.104769] hub 1-0:1.0: 1 port detected [ 5.108586] usb usb2: We don't know the algorithms for LPM for this host, dis abling LPM. [ 5.112694] hub 2-0:1.0: USB hub found [ 5.120493] hub 2-0:1.0: 1 port detected [ 5.125217] leds-gpio: probe of leds failed with error -16 [ 5.129664] usbcore: registered new interface driver usb-storage [ 5.134237] usbcore: registered new interface driver uas [ 5.139726] kmodloader: done loading kernel modules from /etc/modules-boot.d/ * [ 5.148785] init: - preinit - Cannot parse config file '/etc/fw_env.config': No such file or directory Failed to find NVMEM device Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 9.889135] mount_root: loading kmods from internal overlay [ 9.898943] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 9.900183] kmodloader: done loading kernel modules from //etc/modules-boot.d /* [ 9.948474] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. [ 10.019424] block: attempting to load /tmp/overlay/upper/etc/config/fstab [ 10.019547] block: unable to load configuration (fstab: Entry not found) [ 10.025404] block: attempting to load /tmp/overlay/etc/config/fstab [ 10.032026] block: unable to load configuration (fstab: Entry not found) [ 10.038103] block: attempting to load /etc/config/fstab [ 10.045002] block: unable to load configuration (fstab: Entry not found) [ 10.049885] block: no usable configuration [ 10.073995] UBIFS (ubi0:1): default file-system created [ 10.074880] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 10.078165] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 835 [ 10.137317] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "root fs_data" [ 10.137362] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O u nit sizes: 2048 bytes/2048 bytes [ 10.144161] UBIFS (ubi0:1): FS size: 50409472 bytes (48 MiB, 397 LEBs), max 4 07 LEBs, journal size 2539520 bytes (2 MiB, 20 LEBs) [ 10.154054] UBIFS (ubi0:1): reserved for root: 2380963 bytes (2325 KiB) [ 10.165669] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 29B7F 332-672A-4F55-B5C1-ADFC4707887E, small LPT model [ 10.172917] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 10.183722] block: unable to load configuration (fstab: Entry not found) [ 10.190385] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab [ 10.197370] block: unable to load configuration (fstab: Entry not found) [ 10.203659] block: attempting to load /etc/config/fstab [ 10.210432] block: unable to load configuration (fstab: Entry not found) [ 10.215381] block: no usable configuration [ 10.225140] UBIFS (ubi0:1): un-mount UBI device 0 [ 10.226173] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops [ 10.234736] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 10.237136] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 838 [ 10.297307] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "root fs_data" [ 10.297349] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O u nit sizes: 2048 bytes/2048 bytes [ 10.304148] UBIFS (ubi0:1): FS size: 50409472 bytes (48 MiB, 397 LEBs), max 4 07 LEBs, journal size 2539520 bytes (2 MiB, 20 LEBs) [ 10.314040] UBIFS (ubi0:1): reserved for root: 2380963 bytes (2325 KiB) [ 10.325657] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 29B7F 332-672A-4F55-B5C1-ADFC4707887E, small LPT model [ 10.337038] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. [ 10.366035] block: attempting to load /tmp/overlay/upper/etc/config/fstab [ 10.366150] block: unable to load configuration (fstab: Entry not found) [ 10.371861] block: attempting to load /tmp/overlay/etc/config/fstab [ 10.378790] block: unable to load configuration (fstab: Entry not found) [ 10.384841] block: attempting to load /etc/config/fstab [ 10.391563] block: unable to load configuration (fstab: Entry not found) [ 10.396551] block: no usable configuration [ 10.404812] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 10.407359] block: unable to load configuration (fstab: Entry not found) [ 10.414286] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab [ 10.421190] block: unable to load configuration (fstab: Entry not found) [ 10.427565] block: attempting to load /etc/config/fstab [ 10.434264] block: unable to load configuration (fstab: Entry not found) [ 10.439195] block: no usable configuration [ 10.447346] mount_root: overlay filesystem has not been fully initialized yet [ 10.450200] mount_root: switching to ubifs overlay [ 10.461515] overlayfs: null uuid detected in lower fs '/', falling back to xi no=off,index=off,nfs_export=off. [ 10.464345] urandom-seed: Seed file not found (/etc/urandom.seed) [ 10.494648] procd: - early - [ 10.494763] procd: - watchdog - [ 11.043784] procd: - watchdog - [ 11.046208] procd: - ubus - [ 11.197934] procd: - init - Please press Enter to activate this console. [ 11.449886] kmodloader: loading kernel modules from /etc/modules.d/* [ 11.546738] Loading modules backported from Linux version v6.11.2-0-g7aa21fec 187b [ 11.546777] Backport generated by backports.git v6.1.110-1-32-gc61f71fe0942 [ 11.559946] NET: Registered PF_QIPCRTR protocol family [ 11.605673] urngd: v1.0.2 started. [ 11.637323] PPP generic driver version 2.4.2 [ 11.638062] NET: Registered PF_PPPOX protocol family [ 11.648868] ath11k c000000.wifi: ipq6018 hw1.0 [ 11.648899] ath11k c000000.wifi: FW memory mode: 1 [ 11.672712] remoteproc remoteproc0: powering up cd00000.remoteproc [ 11.689526] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340 [ 12.620199] remoteproc remoteproc0: remote processor cd00000.remoteproc is no w up [ 12.621660] ath11k c000000.wifi: qmi ignore invalid mem req type 3 [ 12.627247] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff so c_id 0xffffffff [ 12.632752] ath11k c000000.wifi: fw_version 0x25008f8e fw_build_timestamp 202 4-03-01 03:54 fw_build_id WLAN.HK.2.5.0.1-03982-QCAHKSWPL_SILICONZ-3 [ 12.643284] kmodloader: done loading kernel modules from /etc/modules.d/* [ 12.705426] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-c hip-id=0,qmi-board-id=255,variant=Linksys-MR7500 from ath11k/IPQ6018/hw1.0/board -2.bin [ 12.705484] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-c hip-id=0,qmi-board-id=255 from ath11k/IPQ6018/hw1.0/board-2.bin [ 12.718923] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-c hip-id=0,qmi-board-id=255 from ath11k/IPQ6018/hw1.0/board-2.bin [ 12.731729] ath11k c000000.wifi: failed to fetch board.bin from IPQ6018/hw1.0 [ 12.744292] ath11k c000000.wifi: qmi failed to fetch board file: -12 [ 12.751305] ath11k c000000.wifi: failed to load board data file: -12 [ 15.054029] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. [ 18.125355] br-lan: port 1(lan2) entered blocking state [ 18.125396] br-lan: port 1(lan2) entered disabled state [ 18.129427] nss-dp 3a001200.dp2 lan2: entered allmulticast mode [ 18.134847] nss-dp 3a001200.dp2 lan2: entered promiscuous mode [ 18.148146] br-lan: port 2(lan3) entered blocking state [ 18.148186] br-lan: port 2(lan3) entered disabled state [ 18.152214] nss-dp 3a001400.dp3 lan3: entered allmulticast mode [ 18.157635] nss-dp 3a001400.dp3 lan3: entered promiscuous mode [ 18.168942] br-lan: port 3(lan4) entered blocking state [ 18.169199] br-lan: port 3(lan4) entered disabled state [ 18.174399] nss-dp 3a001600.dp4 lan4: entered allmulticast mode [ 18.179712] nss-dp 3a001600.dp4 lan4: entered promiscuous mode [ 19.203274] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL [ 20.243251] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL [ 21.283240] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL -
Dec 22, 2024 . 1 changed file with 321 additions and 295 deletions.There are no files selected for viewing
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode charactersOriginal file line number Diff line number Diff line change @@ -22,57 +22,57 @@ B - 592 - bootable_media_detect_entry, Start B - 4339 - bootable_media_detect_success, Start B - 5207 - elf_loader_entry, Start B - 5380 - auth_hash_seg_entry, Start B - 7846 - auth_hash_seg_exit, Start B - 8341 - elf_segs_hash_verify_entry, Start B - 103700 - elf_segs_hash_verify_exit, Start B - 107891 - auth_xbl_sec_hash_seg_entry, Start B - 108037 - auth_xbl_sec_hash_seg_exit, Start B - 114586 - xbl_sec_segs_hash_verify_entry, Start B - 114587 - xbl_sec_segs_hash_verify_exit, Start B - 115516 - PBL, End B - 97447 - SBL1, Start B - 237351 - GCC [RstStat:0x10, RstDbg:0x700100] WDog Stat : 0x4 B - 239791 - clock_init, Start D - 3538 - clock_init, Delta B - 249490 - boot_flash_init, Start D - 26291 - boot_flash_init, Delta B - 278038 - sbl1_ddr_set_default_params, Start D - 274 - sbl1_ddr_set_default_params, Delta B - 284656 - boot_config_data_table_init, Start D - 4849 - boot_config_data_table_init, Delta - (575 Bytes) B - 294660 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:0,Subtype:2 B - 299327 - Image Load, Start D - 6618 - OEM_MISC Image Loaded, Delta - (0 Bytes) B - 308660 - Image Load, Start D - 5063 - PMIC Image Loaded, Delta - (0 Bytes) B - 316529 - sbl1_ddr_set_params, Start B - 321531 - CPR configuration: 0x366 B - 324733 - Pre_DDR_clock_init, Start D - 213 - Pre_DDR_clock_init, Delta D - 0 - sbl1_ddr_set_params, Delta B - 359778 - Image Load, Start D - 518 - APDP Image Loaded, Delta - (0 Bytes) B - 378657 - Image Load, Start D - 519 - QTI_MISC Image Loaded, Delta - (0 Bytes) B - 381189 - Image Load, Start D - 854 - Auth Metadata D - 641 - Segments hash check D - 23027 - QSEE Dev Config Image Loaded, Delta - (36490 Bytes) B - 406168 - Image Load, Start D - 6588 - Auth Metadata D - 10400 - Segments hash check D - 347517 - QSEE Image Loaded, Delta - (1436620 Bytes) B - 754234 - Image Load, Start D - 641 - Auth Metadata D - 976 - Segments hash check D - 35868 - RPM Image Loaded, Delta - (102800 Bytes) B - 791749 - Image Load, Start D - 732 - Auth Metadata D - 3233 - Segments hash check D - 130723 - APPSBL Image Loaded, Delta - (568944 Bytes) B - 939796 - SBL1, End D - 842746 - SBL1, Delta S - Flash Throughput, 4000 KB/s (2145429 Bytes, 454561 us) S - Core 0 Frequency, 800 MHz S - DDR Frequency, 466 MHz @@ -119,47 +119,47 @@ NAND read: device 0 offset 0x5d80000, size 0x800000 Type: Kernel Image Compression: gzip compressed Data Start: 0x440000e8 Data Size: 5177428 Bytes = 4.9 MiB Architecture: AArch64 OS: Linux Load Address: 0x41000000 Entry Point: 0x41000000 Hash algo: crc32 Hash value: 9a7f4109 Hash algo: sha1 Hash value: 935602c3b1fdb78220690a36e5f99c217682ab41 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt from FIT Image at 44000000 ... Using 'config@1' configuration Trying 'fdt-1' fdt subimage Description: ARM64 OpenWrt linksys_mr7500 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x444f027c Data Size: 36293 Bytes = 35.4 KiB Architecture: AArch64 Hash algo: crc32 Hash value: 3431fd76 Hash algo: sha1 Hash value: 1ecdfb16ca919a3d8d56557a19ce52229b1b7b62 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x444f027c Uncompressing Kernel Image ... OK Loading Device Tree to 484f4000, end 484ffdc4 ... OK Using machid 0x8030002 from environment Starting kernel ... Jumping to AARCH64 kernel via monitor [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014] [ 0.000000] Linux version 6.6.67 (pppig@gentoolinux) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28363+3-f10ee1e209) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Sun Dec 22 22:48:01 2024 [ 0.000000] Machine model: Linksys MR7500 [ 0.000000] OF: reserved mem: 0x0000000000060000..0x0000000000065fff (24 KiB) nomap non-reusable memory@6 0000 [ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable memor y@40000000 [ 0.000000] OF: reserved mem: 0x000000004a100000..0x000000004a4fffff (4096 KiB) nomap non-reusable bootlo ader@4a100000 [ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable memory @4a600000 [ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable memory @4aa00000 [ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004fffffff (87040 KiB) nomap non-reusable memor y@4ab00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] DMA32 empty @@ -182,7 +182,7 @@ Jumping to AARCH64 kernel via monitor [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: init=/sbin/init rootfstype=squashfs ubi.mtd=alt_rootfs root=mtd:squashfs rootwait root=/dev/ubiblock0_0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 @@ -191,7 +191,7 @@ Jumping to AARCH64 kernel via monitor [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.000000] software IO TLB: mapped [mem 0x000000005f4c0000-0x000000005f5c0000] (1MB) [ 0.000000] Memory: 386944K/524288K available (8128K kernel code, 902K rwdata, 2396K rodata, 1536K init, 276K bss, 137344K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. @@ -201,243 +201,269 @@ Jumping to AARCH64 kernel via monitor [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 4 40795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000071] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lp j=240000) [ 0.000084] pid_max: default: 32768 minimum: 301 [ 0.005245] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.005256] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.009505] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.009721] rcu: Hierarchical SRCU implementation. [ 0.009726] rcu: Max phase no-delay instances is 1000. [ 0.010508] smp: Bringing up secondary CPUs ... [ 0.011155] Detected VIPT I-cache on CPU1 [ 0.011253] CPU1: Booted secondary processor 0x0000000001 [0x51af8014] [ 0.011905] Detected VIPT I-cache on CPU2 [ 0.011974] CPU2: Booted secondary processor 0x0000000002 [0x51af8014] [ 0.012625] Detected VIPT I-cache on CPU3 [ 0.012689] CPU3: Booted secondary processor 0x0000000003 [0x51af8014] [ 0.012757] smp: Brought up 1 node, 4 CPUs [ 0.012765] SMP: Total of 4 processors activated. [ 0.012770] CPU features: detected: 32-bit EL0 Support [ 0.012775] CPU features: detected: CRC32 instructions [ 0.012839] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.012845] CPU: All CPU(s) started at EL1 [ 0.012848] alternatives: applying system-wide alternatives [ 0.021341] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021366] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.023094] pinctrl core: initialized pinctrl subsystem [ 0.025130] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.025723] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.025760] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.025793] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.026187] thermal_sys: Registered thermal governor 'step_wise' [ 0.026243] cpuidle: using governor menu [ 0.026456] ASID allocator initialised with 65536 entries [ 0.032677] /soc@0/interrupt-controller@b000000: Fixed dependency cycle(s) with /soc@0/interrupt-controll er@b000000 [ 0.073163] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.075644] Modules: 29424 pages in range for non-PLT usage [ 0.075653] Modules: 520944 pages in range for PLT usage [ 0.080800] SCSI subsystem initialized [ 0.081021] usbcore: registered new interface driver usbfs [ 0.081070] usbcore: registered new interface driver hub [ 0.081123] usbcore: registered new device driver usb [ 0.081417] qcom_scm: convention: smc arm 64 [ 0.082739] s2: Bringing 0uV into 725000-725000uV [ 0.083551] clocksource: Switched to clocksource arch_sys_counter [ 0.083836] l2: Bringing 0uV into 1800000-1800000uV [ 0.084005] qcom_rpm_smd_regulator remoteproc:glink-edge:rpm-requests:regulators: Supply for l2 (l2) reso lved to itself [ 0.087397] NET: Registered PF_INET protocol family [ 0.087535] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.089625] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.089643] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.089657] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.089705] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.089841] TCP: Hash tables configured (established 4096 bind 4096) [ 0.090339] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear) [ 0.090519] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.090545] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.090970] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.091006] PCI: CLS 0 bytes, default 64 [ 0.092496] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.093046] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.093053] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, In c. [ 0.100588] qcom-qmp-usb-phy 78000.ssphy: supply vdda-phy not found, using dummy regulator [ 0.100739] qcom-qmp-usb-phy 78000.ssphy: supply vdda-pll not found, using dummy regulator [ 0.102464] qcom-qusb2-phy 79000.qusb: supply vdda-pll not found, using dummy regulator [ 0.102592] qcom-qusb2-phy 79000.qusb: supply vdda-phy-dpdm not found, using dummy regulator [ 0.102802] qcom-qusb2-phy 79000.qusb: Registered Qcom-QUSB2 phy [ 0.104269] qcom-pcie: probe of 20000000.pci failed with error -16 [ 0.111841] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.112729] msm_serial 78b0000.serial: msm_serial: detected port #1 [ 0.112766] msm_serial 78b0000.serial: uartclk = 24000000 [ 0.113101] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 22, base_baud = 1500000) is a MSM [ 0.113419] msm_serial 78b1000.serial: msm_serial: detected port #0 [ 0.113449] msm_serial 78b1000.serial: uartclk = 1843199 [ 0.113807] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 23, base_baud = 115199) is a MSM [ 0.113836] msm_serial: console setup on port #0 [ 0.113902] printk: console [ttyMSM0] enabled [ 0.928712] msm_serial: driver initialized [ 0.938078] loop: module loaded [ 0.939425] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac [ 0.940034] nand: Hynix H27S4G8F2EDA-BC [ 0.946677] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 [ 0.975911] mdio_bus 90000.mdio-1: MDIO device at address 8 is missing. [ 0.976304] i2c_dev: i2c /dev entries driver [ 0.987295] sdhci: Secure Digital Host Controller Interface driver [ 0.987339] sdhci: Copyright(c) Pierre Ossman [ 0.992374] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.999922] remoteproc remoteproc0: releasing cd00000.remoteproc [ 1.005900] NET: Registered PF_INET6 protocol family [ 1.009790] Segment Routing with IPv6 [ 1.013518] In-situ OAM (IOAM) with IPv6 [ 1.017131] NET: Registered PF_PACKET protocol family [ 1.021054] 8021q: 802.1Q VLAN Support v1.8 [ 1.056835] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 1.057103] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 1.062960] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 2 [ 1.069584] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 1.077253] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 1.084776] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 1.093886] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 675000 uV [ 1.100812] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 787500 uV [ 1.110804] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 850000 uV [ 1.120613] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 912500 uV [ 1.130452] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 576, quot _offset[ 7]= 0 [ 1.140234] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 765, quot _offset[ 7]= 185 [ 1.151084] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]= 861, quot _offset[ 7]= 95 [ 1.162020] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]= 946, quot _offset[ 7]= 85 [ 1.173258] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 1.175760] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac [ 1.190651] nand: Hynix H27S4G8F2EDA-BC [ 1.197096] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 [ 1.201062] 20 qcomsmem partitions found on MTD device qcom_nand.0 [ 1.208287] Creating 20 MTD partitions on "qcom_nand.0": [ 1.214545] 0x000000000000-0x000000180000 : "0:sbl1" [ 1.222015] 0x000000180000-0x000000280000 : "0:mibib" [ 1.226377] 0x000000280000-0x000000600000 : "0:qsee" [ 1.233774] 0x000000600000-0x000000680000 : "0:devcfg" [ 1.235893] 0x000000680000-0x000000700000 : "0:rpm" [ 1.240811] 0x000000700000-0x000000780000 : "0:cdt" [ 1.245655] 0x000000780000-0x000000800000 : "0:appsblenv" [ 1.250433] 0x000000800000-0x000000980000 : "0:appsbl" [ 1.256976] 0x000000980000-0x000000a00000 : "0:art" [ 1.261043] 0x000000a00000-0x000000a80000 : "0:ethphyfw" [ 1.265827] 0x000000a80000-0x000000b00000 : "u_env" [ 1.271390] 0x000000b00000-0x000000b40000 : "s_env" [ 1.275770] 0x000000b40000-0x000000b80000 : "devinfo" [ 1.280639] 0x000000b80000-0x000001380000 : "kernel" [ 1.293248] 0x000001380000-0x000005d80000 : "rootfs" [ 1.364074] mtd: setting mtd14 (rootfs) as root device [ 1.364451] mtdsplit: no squashfs found in "rootfs" [ 1.368153] 0x000005d80000-0x000006580000 : "alt_kernel" [ 1.381005] 0x000006580000-0x00000af80000 : "alt_rootfs" [ 1.451801] 0x00000af80000-0x00000b380000 : "sysdiag" [ 1.456156] 0x00000b380000-0x00001f080000 : "syscfg" [ 1.757662] 0x00001f080000-0x00001f580000 : "app_data" [ 1.771832] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 799999 KHz, changing to : 864000 KHz [ 1.774869] remoteproc remoteproc0: cd00000.remoteproc is available [ 1.781860] ubi0: attaching mtd16 [ 2.053872] ubi0: scanning is finished [ 2.079212] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 454 LEBs [ 2.079717] ubi0: attached mtd16 (name "alt_rootfs", size 74 MiB) [ 2.084648] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.090798] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.097579] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.104431] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0 [ 2.111196] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 2.117452] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1734907681 [ 2.124488] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 80 [ 2.133783] ubi0: background thread "ubi_bgt0d" started, PID 581 [ 2.143328] block ubiblock0_0: created from ubi0:0(ro▒[ 2.175175] VFS: Mounted root (squashfs filesyst em) readonly on device 254:0. [ 2.175763] Freeing unused kernel memory: 1536K [ 2.181427] Run /sbin/init as init process [ 2.567860] init: Console is alive [ 2.568034] init: - watchdog - [ 2.693575] random: crng init done [ 3.688092] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.725632] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 3.765791] ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist [ 4.183942] __adpt_hppe_uniphy_psgmii_mode_set[1194]:INFO:uniphy 0 psgmii channel selection [ 4.308669] regi_init[2525]:INFO:Initializing CPPE Done!! [ 4.308771] regi_init[2574]:INFO:qca-ssdk module init succeeded! [ 4.315286] EDMA ver 1 hw init [ 4.319332] EDMA HW Reset completed succesfully [ 4.322004] Num rings - TxDesc:1 (23-23) TxCmpl:1 (23-23) [ 4.326425] RxDesc:1 (15-15) RxFill:1 (7-7) [ 4.332350] GMAC1(ffffff8003130900) Invalid MAC@ - using 0a:23:be:cc:76:cc [ 4.335968] dp1: ppe offload disabled: 0 for macid 1 [ 4.342899] dp1: Switch attached to macid 1 status: 0 [ 4.413679] nss-dp 3a001000.dp1 lan1 (uninitialized): failed to connect to phy device [ 4.453556] nss-dp: probe of 3a001000.dp1 failed with error -14 [ 4.453700] GMAC2(ffffff8003607900) Invalid MAC@ - using 16:d2:4a:09:bd:69 [ 4.458278] dp2: ppe offload disabled: 0 for macid 2 [ 4.465238] dp2: Switch attached to macid 2 status: 0 [ 4.544387] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq= POLL) [ 4.545398] GMAC3(ffffff8003600900) Invalid MAC@ - using ba:48:14:6f:9f:27 [ 4.553278] dp3: ppe offload disabled: 0 for macid 3 [ 4.560170] dp3: Switch attached to macid 3 status: 0 [ 4.644388] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq= POLL) [ 4.645372] GMAC4(ffffff8004133900) Invalid MAC@ - using 52:48:83:86:c7:22 [ 4.653280] dp4: ppe offload disabled: 0 for macid 4 [ 4.660177] dp4: Switch attached to macid 4 status: 0 [ 4.744384] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq= POLL) [ 4.745359] GMAC5(ffffff8004135900) Invalid MAC@ - using ee:32:d8:eb:d4:17 [ 4.753275] dp5: ppe offload disabled: 0 for macid 5 [ 4.760169] dp5: Switch attached to macid 5 status: 0 [ 4.765297] nss-dp 3a001800.dp5 wan (uninitialized): failed to connect to phy device [ 4.770217] nss-dp: probe of 3a001800.dp5 failed with error -14 [ 4.778113] ********************************************************** [ 4.783679] * NSS Data Plane driver [ 4.790245] ********************************************************** [ 4.806805] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 4.806852] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 4.812068] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008000000010 [ 4.818797] xhci-hcd xhci-hcd.1.auto: irq 39, io mem 0x08a00000 [ 4.828226] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 4.834023] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 4.839576] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 4.847526] hub 1-0:1.0: USB hub found [ 4.853861] hub 1-0:1.0: 1 port detected [ 4.857751] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.861916] hub 2-0:1.0: USB hub found [ 4.869821] hub 2-0:1.0: 1 port detected [ 4.875805] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.877954] init: - preinit - Cannot parse config file '/etc/fw_env.config': No such file or directory Failed to find NVMEM device Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 9.600354] UBIFS (ubi0:1): default file-system created [ 9.601011] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 9.604633] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 788 [ 9.665128] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 9.665168] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 b ytes [ 9.671946] UBIFS (ubi0:1): FS size: 56377344 bytes (53 MiB, 444 LEBs), max 454 LEBs, journal size 279347 2 bytes (2 MiB, 22 LEBs) [ 9.681867] UBIFS (ubi0:1): reserved for root: 2662841 bytes (2600 KiB) [ 9.693487] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID F8E18911-30D2-41F6-924A-4FCAC83CF DAC, small LPT model [ 9.701592] mount_root: overlay filesystem has not been fully initialized yet [ 9.711707] mount_root: switching to ubifs overlay [ 9.721249] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export= off. [ 9.725544] urandom-seed: Seed file not found (/etc/urandom.seed) [ 9.774010] procd: - early - [ 9.774129] procd: - watchdog - [ 10.318243] procd: - watchdog - [ 10.318854] procd: - ubus - [ 10.372767] procd: - init - Please press Enter to activate this console. [ 10.605799] kmodloader: loading kernel modules from /etc/modules.d/* [ 10.788060] Loading modules backported from Linux version v6.11.2-0-g7aa21fec187b [ 10.788098] Backport generated by backports.git v6.1.110-1-32-gc61f71fe0942 [ 10.801315] urngd: v1.0.2 started. [ 10.802312] NET: Registered PF_QIPCRTR protocol family [ 10.886261] PPP generic driver version 2.4.2 [ 10.886948] NET: Registered PF_PPPOX protocol family [ 10.897756] ath11k c000000.wifi: ipq6018 hw1.0 [ 10.897787] ath11k c000000.wifi: FW memory mode: 1 [ 10.921891] remoteproc remoteproc0: powering up cd00000.remoteproc [ 10.922287] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340 [ 11.864693] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up [ 11.869183] kmodloader: done loading kernel modules from /etc/modules.d/* [ 11.871534] ath11k c000000.wifi: qmi ignore invalid mem req type 3 [ 11.878450] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff [ 11.884021] ath11k c000000.wifi: fw_version 0x25008f8e fw_build_timestamp 2024-03-01 03:54 fw_build_id WL AN.HK.2.5.0.1-03982-QCAHKSWPL_SILICONZ-3 [ 11.963290] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255,va riant=Linksys-MR7500 from ath11k/IPQ6018/hw1.0/board-2.bin [ 11.963350] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255 fr om ath11k/IPQ6018/hw1.0/board-2.bin [ 11.976830] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255 fr om ath11k/IPQ6018/hw1.0/board-2.bin [ 11.989603] ath11k c000000.wifi: failed to fetch board.bin from IPQ6018/hw1.0 [ 12.002164] ath11k c000000.wifi: qmi failed to fetch board file: -12 [ 12.009185] ath11k c000000.wifi: failed to load board data file: -12 [ 16.840091] br-lan: port 1(lan2) entered blocking state [ 16.840131] br-lan: port 1(lan2) entered disabled state [ 16.844227] nss-dp 3a001200.dp2 lan2: entered allmulticast mode [ 16.849550] nss-dp 3a001200.dp2 lan2: entered promiscuous mode [ 16.862728] br-lan: port 2(lan3) entered blocking state [ 16.862771] br-lan: port 2(lan3) entered disabled state [ 16.866869] nss-dp 3a001400.dp3 lan3: entered allmulticast mode [ 16.872167] nss-dp 3a001400.dp3 lan3: entered promiscuous mode [ 16.882075] br-lan: port 3(lan4) entered blocking state [ 16.883811] br-lan: port 3(lan4) entered disabled state [ 16.888935] nss-dp 3a001600.dp4 lan4: entered allmulticast mode [ 16.894365] nss-dp 3a001600.dp4 lan4: entered promiscuous mode [ 17.843826] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL [ 18.883817] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL [ 19.923831] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL [ 20.004208] nss-dp 3a001600.dp4 lan4: PHY Link up speed: 1000 [ 20.005225] br-lan: port 3(lan4) entered blocking state [ 20.008932] br-lan: port 3(lan4) entered forwarding state [ 20.983881] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL -
Dec 22, 2024 .There are no files selected for viewing
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode charactersOriginal file line number Diff line number Diff line change @@ -0,0 +1,443 @@ Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00098-IPQ60xxLZB-1 S - IMAGE_VARIANT_STRING=IPQ6018LA S - OEM_IMAGE_VERSION_STRING=crm-ubuntu121 S - Boot Interface: NAND S - Secure Boot: Off S - Boot Config @ 0x000a602c = 0x000002e5 S - JTAG ID @ 0x000a607c = 0x001260e1 S - OEM ID @ 0x000a6080 = 0x00000000 S - Serial Number @ 0x000a4128 = 0xdb870ac3 S - OEM Config Row 0 @ 0x000a4188 = 0x0000000000000000 S - OEM Config Row 1 @ 0x000a4190 = 0x0000000000000000 S - Feature Config Row 0 @ 0x000a4130 = 0x0000000008200001 S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e80383000009 S - PBL Patch Ver: 1 S - I-cache: On S - D-cache: On B - 3413 - PBL, Start B - 592 - bootable_media_detect_entry, Start B - 4339 - bootable_media_detect_success, Start B - 5207 - elf_loader_entry, Start B - 5380 - auth_hash_seg_entry, Start B - 7847 - auth_hash_seg_exit, Start B - 8342 - elf_segs_hash_verify_entry, Start B - 103700 - elf_segs_hash_verify_exit, Start B - 107891 - auth_xbl_sec_hash_seg_entry, Start B - 108037 - auth_xbl_sec_hash_seg_exit, Start B - 114588 - xbl_sec_segs_hash_verify_entry, Start B - 114589 - xbl_sec_segs_hash_verify_exit, Start B - 115518 - PBL, End B - 97417 - SBL1, Start B - 237381 - GCC [RstStat:0x0, RstDbg:0x600000] WDog Stat : 0x4 B - 239791 - clock_init, Start D - 3629 - clock_init, Delta B - 249276 - boot_flash_init, Start D - 26230 - boot_flash_init, Delta B - 277885 - sbl1_ddr_set_default_params, Start D - 274 - sbl1_ddr_set_default_params, Delta B - 284504 - boot_config_data_table_init, Start D - 4819 - boot_config_data_table_init, Delta - (575 Bytes) B - 294508 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:0,Subtype:2 B - 299174 - Image Load, Start D - 6619 - OEM_MISC Image Loaded, Delta - (0 Bytes) B - 308507 - Image Load, Start D - 5063 - PMIC Image Loaded, Delta - (0 Bytes) B - 316376 - sbl1_ddr_set_params, Start B - 321378 - CPR configuration: 0x366 B - 324581 - Pre_DDR_clock_init, Start D - 183 - Pre_DDR_clock_init, Delta D - 0 - sbl1_ddr_set_params, Delta B - 359656 - Image Load, Start D - 549 - APDP Image Loaded, Delta - (0 Bytes) B - 378505 - Image Load, Start D - 518 - QTI_MISC Image Loaded, Delta - (0 Bytes) B - 381036 - Image Load, Start D - 763 - Auth Metadata D - 671 - Segments hash check D - 23058 - QSEE Dev Config Image Loaded, Delta - (36490 Bytes) B - 406046 - Image Load, Start D - 6496 - Auth Metadata D - 10340 - Segments hash check D - 348676 - QSEE Image Loaded, Delta - (1436620 Bytes) B - 755271 - Image Load, Start D - 763 - Auth Metadata D - 976 - Segments hash check D - 35899 - RPM Image Loaded, Delta - (102800 Bytes) B - 792817 - Image Load, Start D - 671 - Auth Metadata D - 3203 - Segments hash check D - 130784 - APPSBL Image Loaded, Delta - (568944 Bytes) B - 940925 - SBL1, End D - 843904 - SBL1, Delta S - Flash Throughput, 4000 KB/s (2145429 Bytes, 455840 us) S - Core 0 Frequency, 800 MHz S - DDR Frequency, 466 MHz U-Boot 2016.01 (Dec 10 2020 - 22:29:27 +0800) CBT U-Boot ver: 1.0.12 ([IPQ6018].[SPF11.2 CS]) DRAM: smem ram ptable found: ver: 2 len: 4 512 MiB NAND: ONFI device found ID = 1590acad Vendor = ad Device = ac qpic_nand: changing oobsize to 64 from 128 bytes SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000 ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0) 512 MiB MMC: sdhci: Node Not found, skipping initialization PCI Link Intialized In: serial@78B1000 Out: serial@78B1000 Err: serial@78B1000 machid: 8030002 eth1 MAC Address from ART is not valid eth2 MAC Address from ART is not valid eth3 MAC Address from ART is not valid eth4 MAC Address from ART is not valid eth5 MAC Address from ART is not valid Setting bus to 0 Valid chip addresses: Updating boot_count ... done Hit any key to stop autoboot: 0 NAND read: device 0 offset 0x5d80000, size 0x800000 8388608 bytes read: OK ## Loading kernel from FIT Image at 44000000 ... Using 'config@1' configuration Trying 'kernel-1' kernel subimage Description: ARM64 OpenWrt Linux-6.6.67 Type: Kernel Image Compression: gzip compressed Data Start: 0x440000e8 Data Size: 5177431 Bytes = 4.9 MiB Architecture: AArch64 OS: Linux Load Address: 0x41000000 Entry Point: 0x41000000 Hash algo: crc32 Hash value: 6d4d2c96 Hash algo: sha1 Hash value: 43012aef96cb73fd15bcfdca460ca1ec8e71ce69 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt from FIT Image at 44000000 ... Using 'config@1' configuration Trying 'fdt-1' fdt subimage Description: ARM64 OpenWrt linksys_mr7500 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x444f0280 Data Size: 36051 Bytes = 35.2 KiB Architecture: AArch64 Hash algo: crc32 Hash value: f1df6d37 Hash algo: sha1 Hash value: 681214a25f18a356dde2bf2552a615dfa901920a Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x444f0280 Uncompressing Kernel Image ... OK Loading Device Tree to 484f4000, end 484ffcd2 ... OK Using machid 0x8030002 from environment Starting kernel ... Jumping to AARCH64 kernel via monitor [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014] [ 0.000000] Linux version 6.6.67 (pppig@gentoolinux) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28363+3-f10ee1e209) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Sun Dec 22 01:46:13 2024 [ 0.000000] Machine model: Linksys MR7500 [ 0.000000] OF: reserved mem: 0x0000000000060000..0x0000000000065fff (24 KiB) nomap non-reusable memory@60000 [ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable memory@40000000 [ 0.000000] OF: reserved mem: 0x000000004a100000..0x000000004a4fffff (4096 KiB) nomap non-reusable bootloader@4a100000 [ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable memory@4a600000 [ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable memory@4aa00000 [ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004fffffff (87040 KiB) nomap non-reusable memory@4ab00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff] [ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a0fffff] [ 0.000000] node 0: [mem 0x000000004a100000-0x000000004a4fffff] [ 0.000000] node 0: [mem 0x000000004a500000-0x000000004a5fffff] [ 0.000000] node 0: [mem 0x000000004a600000-0x000000004fffffff] [ 0.000000] node 0: [mem 0x0000000050000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 18 pages/cpu s35624 r8192 d29912 u73728 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: init=/sbin/init rootfstype=squashfs ubi.mtd=alt_rootfs root=mtd:squashfs rootwait root=/dev/ubiblock0_0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.000000] software IO TLB: mapped [mem 0x000000005f4c0000-0x000000005f5c0000] (1MB) [ 0.000000] Memory: 386944K/524288K available (8128K kernel code, 902K rwdata, 2396K rodata, 1536K init, 276K bss, 137344K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000072] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000085] pid_max: default: 32768 minimum: 301 [ 0.005236] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.005248] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.009484] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.009700] rcu: Hierarchical SRCU implementation. [ 0.009705] rcu: Max phase no-delay instances is 1000. [ 0.010481] smp: Bringing up secondary CPUs ... [ 0.011126] Detected VIPT I-cache on CPU1 [ 0.011222] CPU1: Booted secondary processor 0x0000000001 [0x51af8014] [ 0.011869] Detected VIPT I-cache on CPU2 [ 0.011938] CPU2: Booted secondary processor 0x0000000002 [0x51af8014] [ 0.012591] Detected VIPT I-cache on CPU3 [ 0.012657] CPU3: Booted secondary processor 0x0000000003 [0x51af8014] [ 0.012724] smp: Brought up 1 node, 4 CPUs [ 0.012733] SMP: Total of 4 processors activated. [ 0.012738] CPU features: detected: 32-bit EL0 Support [ 0.012743] CPU features: detected: CRC32 instructions [ 0.012806] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.012812] CPU: All CPU(s) started at EL1 [ 0.012815] alternatives: applying system-wide alternatives [ 0.021264] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021288] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.023014] pinctrl core: initialized pinctrl subsystem [ 0.025041] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.025623] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.025661] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.025693] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.026094] thermal_sys: Registered thermal governor 'step_wise' [ 0.026151] cpuidle: using governor menu [ 0.026362] ASID allocator initialised with 65536 entries [ 0.032307] /soc@0/interrupt-controller@b000000: Fixed dependency cycle(s) with /soc@0/interrupt-controller@b000000 [ 0.072251] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.074700] Modules: 29424 pages in range for non-PLT usage [ 0.074708] Modules: 520944 pages in range for PLT usage [ 0.079801] SCSI subsystem initialized [ 0.080012] usbcore: registered new interface driver usbfs [ 0.080061] usbcore: registered new interface driver hub [ 0.080117] usbcore: registered new device driver usb [ 0.080387] qcom_scm: convention: smc arm 64 [ 0.081686] s2: Bringing 0uV into 725000-725000uV [ 0.082520] clocksource: Switched to clocksource arch_sys_counter [ 0.082773] l2: Bringing 0uV into 1800000-1800000uV [ 0.082933] qcom_rpm_smd_regulator remoteproc:glink-edge:rpm-requests:regulators: Supply for l2 (l2) resolved to itself [ 0.086357] NET: Registered PF_INET protocol family [ 0.086495] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.088596] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.088614] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.088628] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.088677] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.088817] TCP: Hash tables configured (established 4096 bind 4096) [ 0.089303] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear) [ 0.089481] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.089506] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.089932] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.089969] PCI: CLS 0 bytes, default 64 [ 0.091489] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.092018] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.092025] jffs2: vers [ 1.047274] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 1.047557] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 1.053419] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 2 [ 1.059997] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 1.067665] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 1.075187] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 1.084326] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 675000 uV [ 1.091252] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 787500 uV [ 1.101252] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 850000 uV [ 1.111059] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 912500 uV [ 1.120897] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 576, quot_offset[ 7]= 0 [ 1.130680] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 765, quot_offset[ 7]= 185 [ 1.141530] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]= 861, quot_offset[ 7]= 95 [ 1.152479] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]= 946, quot_offset[ 7]= 85 [ 1.163735] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 1.166235] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac [ 1.181088] nand: Hynix H27S4G8F2EDA-BC [ 1.187532] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 [ 1.191463] 20 qcomsmem partitions found on MTD device qcom_nand.0 [ 1.198728] Creating 20 MTD partitions on "qcom_nand.0": [ 1.204970] 0x000000000000-0x000000180000 : "0:sbl1" [ 1.212378] 0x000000180000-0x000000280000 : "0:mibib" [ 1.216798] 0x000000280000-0x000000600000 : "0:qsee" [ 1.224114] 0x000000600000-0x000000680000 : "0:devcfg" [ 1.226297] 0x000000680000-0x000000700000 : "0:rpm" [ 1.231273] 0x000000700000-0x000000780000 : "0:cdt" [ 1.236054] 0x000000780000-0x000000800000 : "0:appsblenv" [ 1.240872] 0x000000800000-0x000000980000 : "0:appsbl" [ 1.247409] 0x000000980000-0x000000a00000 : "0:art" [ 1.251456] 0x000000a00000-0x000000a80000 : "0:ethphyfw" [ 1.256295] 0x000000a80000-0x000000b00000 : "u_env" [ 1.261826] 0x000000b00000-0x000000b40000 : "s_env" [ 1.266213] 0x000000b40000-0x000000b80000 : "devinfo" [ 1.271036] 0x000000b80000-0x000001380000 : "kernel" [ 1.283559] 0x000001380000-0x000005d80000 : "rootfs" [ 1.352388] mtd: setting mtd14 (rootfs) as root device [ 1.352742] mtdsplit: no squashfs found in "rootfs" [ 1.356461] 0x000005d80000-0x000006580000 : "alt_kernel" [ 1.369136] 0x000006580000-0x00000af80000 : "alt_rootfs" [ 1.438233] 0x00000af80000-0x00000b380000 : "sysdiag" [ 1.442523] 0x00000b380000-0x00001f080000 : "syscfg" [ 1.738012] 0x00001f080000-0x00001f580000 : "app_data" [ 1.752091] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 799999 KHz, changing to: 864000 KHz [ 1.755170] remoteproc remoteproc0: cd00000.remoteproc is available [ 1.762123] ubi0: attaching mtd16 [ 2.191145] ubi0: scanning is finished [ 2.198959] ubi0: attached mtd16 (name "alt_rootfs", size 74 MiB) [ 2.199001] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.204054] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.210810] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.217671] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0 [ 2.224444] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 2.230689] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1734831973 [ 2.237728] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 80 [ 2.247028] ubi0: background thread "ubi_bgt0d" started, PID 576 [ 2.256632] block ubiblock0_0: created from ubi0:0(ro▒[ 2.271033] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 2.271505] Freeing unused kernel memory: 1536K [ 2.277271] Run /sbin/init as init process [ 2.432178] init: Console is alive [ 2.432303] init: - watchdog - [ 2.492526] random: crng init done [ 3.038114] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.067730] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 3.108860] ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist [ 3.522887] __adpt_hppe_uniphy_psgmii_mode_set[1194]:INFO:uniphy 0 psgmii channel selection [ 3.647604] regi_init[2525]:INFO:Initializing CPPE Done!! [ 3.647723] regi_init[2574]:INFO:qca-ssdk module init succeeded! [ 3.654192] EDMA ver 1 hw init [ 3.658268] EDMA HW Reset completed succesfully [ 3.660940] Num rings - TxDesc:1 (23-23) TxCmpl:1 (23-23) [ 3.665382] RxDesc:1 (15-15) RxFill:1 (7-7) [ 3.671286] GMAC1(ffffff80035f3900) Invalid MAC@ - using ce:a2:08:00:37:ef [ 3.674921] dp1: ppe offload disabled: 0 for macid 1 [ 3.681834] dp1: Switch attached to macid 1 status: 0 [ 3.884538] Qualcomm QCA8075 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL) [ 3.885591] GMAC2(ffffff8002820900) Invalid MAC@ - using 3a:98:90:d7:7c:ad [ 3.893450] dp2: ppe offload disabled: 0 for macid 2 [ 3.900284] dp2: Switch attached to macid 2 status: 0 [ 3.983344] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL) [ 3.984338] GMAC3(ffffff80035f4900) Invalid MAC@ - using 82:47:9b:6b:87:b4 [ 3.992237] dp3: ppe offload disabled: 0 for macid 3 [ 3.999129] dp3: Switch attached to macid 3 status: 0 [ 4.083339] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL) [ 4.084332] GMAC4(ffffff80035b5900) Invalid MAC@ - using 9e:db:99:04:7c:a2 [ 4.092230] dp4: ppe offload disabled: 0 for macid 4 [ 4.099126] dp4: Switch attached to macid 4 status: 0 [ 4.183326] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL) [ 4.184313] GMAC5(ffffff80035b7900) Invalid MAC@ - using 7a:43:90:e0:55:f8 [ 4.192218] dp5: ppe offload disabled: 0 for macid 5 [ 4.199109] dp5: Switch attached to macid 5 status: 0 [ 4.204235] nss-dp 3a001800.dp5 wan (uninitialized): failed to connect to phy device [ 4.209180] nss-dp: probe of 3a001800.dp5 failed with error -14 [ 4.217068] ********************************************************** [ 4.222606] * NSS Data Plane driver [ 4.229201] ********************************************************** [ 4.244264] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 4.244317] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 4.249528] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008000000010 [ 4.256253] xhci-hcd xhci-hcd.1.auto: irq 39, io mem 0x08a00000 [ 4.265662] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 4.271475] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 4.277041] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 4.284994] hub 1-0:1.0: USB hub found [ 4.291196] hub 1-0:1.0: 1 port detected [ 4.295198] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.299276] hub 2-0:1.0: USB hub found [ 4.307160] hub 2-0:1.0: 1 port detected [ 4.313121] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.318112] init: - preinit - /bin/board_detect: /etc/board.d/01_leds: line 21: syntax error: unexpected ")" (expecting ";;") Cannot parse config file '/etc/fw_env.config': No such file or directory Failed to find NVMEM device Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 5.912752] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL [ 6.952769] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL [ 7.992529] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL [ 8.957550] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 8.957679] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 804 [ 8.996072] UBIFS (ubi0:1): recovery needed [ 9.032519] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL [ 9.092552] UBIFS (ubi0:1): recovery completed [ 9.092672] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 9.095895] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 9.103826] UBIFS (ubi0:1): FS size: 56377344 bytes (53 MiB, 444 LEBs), max 454 LEBs, journal size 2793472 bytes (2 MiB, 22 LEBs) [ 9.113707] UBIFS (ubi0:1): reserved for root: 2662841 bytes (2600 KiB) [ 9.125328] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID E762BF7A-E551-4106-B7D7-8B366A6605A9, small LPT model [ 9.135303] mount_root: switching to ubifs overlay [ 9.147517] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 9.152469] urandom-seed: Seeding with /etc/urandom.seed [ 9.210600] procd: - early - [ 9.210715] procd: - watchdog - [ 9.759142] procd: - watchdog - [ 9.759737] procd: - ubus - [ 9.913092] procd: - init - Please press Enter to activate this console. [ 10.073091] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL [ 10.164013] kmodloader: loading kernel modules from /etc/modules.d/* [ 10.297306] Loading modules backported from Linux version v6.11.2-0-g7aa21fec187b [ 10.297345] Backport generated by backports.git v6.1.110-1-32-gc61f71fe0942 [ 10.309535] NET: Registered PF_QIPCRTR protocol family [ 10.351667] urngd: v1.0.2 started. [ 10.391183] PPP generic driver version 2.4.2 [ 10.391865] NET: Registered PF_PPPOX protocol family [ 10.402646] ath11k c000000.wifi: ipq6018 hw1.0 [ 10.402676] ath11k c000000.wifi: FW memory mode: 1 [ 10.426526] remoteproc remoteproc0: powering up cd00000.remoteproc [ 10.426875] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340 [ 11.336936] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL [ 11.405332] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up [ 11.406581] ath11k c000000.wifi: qmi ignore invalid mem req type 3 [ 11.412322] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff [ 11.417892] ath11k c000000.wifi: fw_version 0x25008f8e fw_build_timestamp 2024-03-01 03:54 fw_build_id WLAN.HK.2.5.0.1-03982-QCAHKSWPL_SILICONZ-3 [ 11.426874] kmodloader: done loading kernel modules from /etc/modules.d/* [ 11.492312] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255,variant=Linksys-MR7500 from ath11k/IPQ6018/hw1.0/board-2.bin [ 11.492367] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255 from ath11k/IPQ6018/hw1.0/board-2.bin [ 11.505902] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255 from ath11k/IPQ6018/hw1.0/board-2.bin [ 11.518671] ath11k c000000.wifi: failed to fetch board.bin from IPQ6018/hw1.0 [ 11.531201] ath11k c000000.wifi: qmi failed to fetch board file: -12 [ 11.538208] ath11k c000000.wifi: failed to load board data file: -12 [ 12.402534] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL [ 13.432565] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL [ 13.779267] br-lan: port 1(lan1) entered blocking state [ 13.779312] br-lan: port 1(lan1) entered disabled state [ 13.783426] nss-dp 3a001000.dp1 lan1: entered allmulticast mode [ 13.788743] nss-dp 3a001000.dp1 lan1: entered promiscuous mode [ 13.801190] br-lan: port 2(lan2) entered blocking state [ 13.801229] br-lan: port 2(lan2) entered disabled state [ 13.805568] nss-dp 3a001200.dp2 lan2: entered allmulticast mode [ 13.810873] nss-dp 3a001200.dp2 lan2: entered promiscuous mode [ 13.820836] br-lan: port 3(lan3) entered blocking state [ 13.822460] br-lan: port 3(lan3) entered disabled state [ 13.827650] nss-dp 3a001400.dp3 lan3: entered allmulticast mode [ 13.832991] nss-dp 3a001400.dp3 lan3: entered promiscuous mode [ 13.843001] br-lan: port 4(lan4) entered blocking state [ 13.844596] br-lan: port 4(lan4) entered disabled state [ 13.849748] nss-dp 3a001600.dp4 lan4: entered allmulticast mode [ 13.855160] nss-dp 3a001600.dp4 lan4: entered promiscuous mode [ 14.472575] hsl_phy_phydev_get[775]:ERROR:phy_addr 8 phydev is NULL