Skip to content

Instantly share code, notes, and snippets.

@SqyD

SqyD/1st_readme.md

Last active November 23, 2022 07:30
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save SqyD/a927ab612df767a0cc892bcde23d025c to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save SqyD/a927ab612df767a0cc892bcde23d025c to your computer and use it in GitHub Desktop.
Download ZIP
mqtt-pi-pwn-fan
Raw
mqtt_fan.py
#!/usr/bin/python3
import time
import paho.mqtt.client as mqtt
from gpiozero import PWMOutputDevice
# MQTT configuration
broker = '127.0.0.1'
device_id = 'test_fan'
on_topic = 'homeassistant/' + device_id + '/on/set'
on_state_topic = 'homeassistant/' + device_id + '/on/state'
speed_topic = 'homeassistant/' + device_id + '/speed/set'
speed_state_topic = 'homeassistant/' + device_id + '/speed/state'
# gpio settings
gpio_pin = 18
pwm_freq = 5000
speeds = {'low': 0.05, 'medium': 0.4, 'high': 1}
class PwmFan:
on_state = 'OFF'
pwm = PWMOutputDevice(gpio_pin,frequency=pwm_freq)
speed_state = 'high'
def switch(self, onoff):
if onoff == 'ON':
if self.on_state == 'OFF':
self.on_state = 'ON'
self.set_speed(self.speed_state)
elif onoff == 'OFF':
if self.on_state == 'ON':
self.on_state = 'OFF'
self.pwm.off()
def set_speed(self,speed):
if speed in speeds:
if self.on_state == 'ON':
self.pwm.value=speeds[speed]
self.speed_state = speed
fan = PwmFan()
def on_message(client, userdata, message):
payload = str(message.payload.decode("utf-8"))
topic = message.topic
if topic == on_topic:
print("ON/OF command received")
if (payload == 'ON') or (payload == 'OFF'):
print("turning " + payload)
fan.switch(payload)
client.publish(on_state_topic, payload)
if payload == 'ON':
client.publish(speed_state_topic, fan.speed_state)
elif message.topic == speed_topic:
if payload in speeds:
print('Setting speed to ' + payload)
fan.set_speed(payload)
if fan.on_state == 'ON':
client.publish(speed_state_topic, fan.speed_state)
# Send messages in a loop
client = mqtt.Client("qstream")
client.on_message = on_message
client.connect(broker)
client.subscribe(on_topic)
client.subscribe(speed_topic)
client.loop_forever()
Raw
mqtt_fan.service
[Unit]
Description=MQTT Fan
After=multi-user.target
[Service]
Type=idle
ExecStart=/usr/bin/python3 /home/pi/mqtt_fan.py
[Install]
WantedBy=multi-user.target
Raw
raspberry_install.md

  • Installing dependencies on a stock Raspbian install:

    sudo apt-get update sudo apt-get upgrade sudo apt-get install python3-pip python3-dev python3-gpiozero sudo pip3 install paho-mqtt

  • Create the python script as /home/pi/mqtt_fan.py

  • Create a systemd service definition file as /lib/systemd/system/mqtt_fan.service

@ReliableBob
Copy link

ReliableBob commented May 9, 2019

Hi.
Thanks for the great code.
Please tell me how to properly connect the fan to the GPIO? It needs to be connected directly or through a transistor.
Please give me the connection diagram.
Thank.

@kvvoff
Copy link

kvvoff commented May 9, 2019

Thanks!

@kvvoff
Copy link

kvvoff commented May 10, 2019

How can I use authentication for the mqtt client?

@kvvoff
Copy link

kvvoff commented May 10, 2019

and when i start mqtt_fan.py :
gpiozero.exc.PinPWMUnsupported: PWM is not supported on pin GPIO18

@ReliableBob
Copy link

ReliableBob commented May 10, 2019 •
edited
Loading

How can I use authentication for the mqtt client?

# If your homeassistant is protected by as password, uncomment this next line:
# client.username_pw_set('homeassistant','yourpasswordhere')

@ReliableBob
Copy link

ReliableBob commented May 10, 2019

and when i start mqtt_fan.py :
gpiozero.exc.PinPWMUnsupported: PWM is not supported on pin GPIO18

GPIO18 and there is a PWM

@kvvoff
Copy link

kvvoff commented May 10, 2019 •
edited
Loading

@ReliableBob
how could I not notice! Inattentive :) thanks. But I don’t understand why I get a error on pin18

@kvvoff
Copy link

kvvoff commented May 10, 2019

@ReliableBob
root@osmc:/home/osmc/mqtt# sudo python3 mqtt_fan.py /usr/local/lib/python3.5/dist-packages/gpiozero/devices.py:279: PinFactoryFallba ck: Falling back from rpigpio: No module named 'RPi' 'Falling back from %s: %s' % (name, str(e)))) /usr/local/lib/python3.5/dist-packages/gpiozero/devices.py:279: PinFactoryFallba ck: Falling back from rpio: No module named 'RPIO' 'Falling back from %s: %s' % (name, str(e)))) /usr/local/lib/python3.5/dist-packages/gpiozero/devices.py:279: PinFactoryFallba ck: Falling back from pigpio: No module named 'pigpio' 'Falling back from %s: %s' % (name, str(e)))) Traceback (most recent call last): File "mqtt_fan.py", line 19, in <module> class PwmFan: File "mqtt_fan.py", line 21, in PwmFan pwm = PWMOutputDevice(gpio_pin,frequency=pwm_freq) File "/usr/local/lib/python3.5/dist-packages/gpiozero/devices.py", line 124, i n __call__ self = super(GPIOMeta, cls).__call__(*args, **kwargs) File "/usr/local/lib/python3.5/dist-packages/gpiozero/output_devices.py", line 418, in __init__ self.pin.frequency = frequency File "/usr/local/lib/python3.5/dist-packages/gpiozero/pins/__init__.py", line 358, in <lambda> lambda self, value: self._set_frequency(value), File "/usr/local/lib/python3.5/dist-packages/gpiozero/pins/__init__.py", line 354, in _set_frequency raise PinPWMUnsupported("PWM is not supported on pin %r" % self) gpiozero.exc.PinPWMUnsupported: PWM is not supported on pin GPIO18

@ReliableBob
Copy link

ReliableBob commented May 10, 2019

Strange things ... I did everything according to the instructions and it works for me without errors ...
Raspberry pi 3 B +

@kvvoff
Copy link

kvvoff commented May 10, 2019 •
edited
Loading

@ReliableBob
Really. But I have OSMС on pi2, not raspbian, can be because of this. And I did not manage to install python3-gpiozero via apt, I installed via pip. I will try on another system for the purity of the experiment.

@kvvoff
Copy link

kvvoff commented May 11, 2019

I needed a "wheel" setup for latest osmс

apt-get update
apt-get install python3-pip python3-dev gcc
apt-get install python3-setuptools
pip3 install wheel
pip3 install gpiozero

its working for me on my osmc, raspberry pi 2 model b

@SqyD
Copy link
Author

SqyD commented May 22, 2019

Please tell me how to properly connect the fan to the GPIO? It needs to be connected directly or through a transistor.
I used a cheap hardware PWM to 10V board since my ventilation unit has a 0-10V input. I don't have a diagram and my setup is likely different then yours. My ventilation unit has a 12V output and a 0-10V input. I used the PWM to 0-10V board to convert the GPIO PWM output to the variable voltage. I hope this clarifies things.

@ReliableBob
Copy link

ReliableBob commented May 22, 2019

Да, спасибо. Я всё понял.

Please tell me how to properly connect the fan to the GPIO? It needs to be connected directly or through a transistor.
I used a cheap hardware PWM to 10V board since my ventilation unit has a 0-10V input. I don't have a diagram and my setup is likely different then yours. My ventilation unit has a 12V output and a 0-10V input. I used the PWM to 0-10V board to convert the GPIO PWM output to the variable voltage. I hope this clarifies things.

Yes thank you. I got it

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment