adothompson · February 4, 2012 11:22
diff --git a/gistfile1.cfg b/gistfile1.cfg
 #
 # CONFIGURATION FOR USING SMS KANNEL WITH RAPIDSMS
 #
 # For any modifications to this file, see Kannel User Guide 
 # If that does not help, see Kannel web page (http://www.kannel.org) and
 # various online help and mailing list archives
 #
 # Notes on those who base their configuration on this:
 #  1) check security issues! (allowed IPs, passwords and ports)
 #  2) groups cannot have empty rows inside them!
 #  3) read the user guide
 #
 # Kalle Marjola for Kannel project 2001, 2004

 include = "/etc/kannel/modems.conf" 

 #---------------------------------------------
 # CORE
 #
 # There is only one core group and it sets all basic settings
 # of the bearerbox (and system). You should take extra notes on
 # configuration variables like 'store-file' (or 'store-dir'),
 # 'admin-allow-ip' and 'access.log'


 group = core
 admin-port = 13000
 smsbox-port = 13001
 admin-password = CHANGE ME
 status-password = CHANGE ME
 admin-deny-ip = "*.*.*.*"
 admin-allow-ip = "127.0.0.1"
 box-deny-ip = "*.*.*.*"
 box-allow-ip = "127.0.0.1"
 log-file = "/var/log/kannel/bearerbox.log"
 log-level = 0

 #---------------------------------------------
 # SMSC CONNECTIONS
 #
 # SMSC connections are created in bearerbox and they handle SMSC specific
 # protocol and message relying. You need these to actually receive and send
 # messages to handset, but can use GSM modems as virtual SMSCs


 # This is a fake smsc connection, _only_ used to test the system and services.
 # It really cannot relay messages to actual handsets!

 #group = smsc
 #smsc = fake
 #smsc-id = FAKE
 #port = 20000
 #connect-allow-ip = 127.0.0.1

 group = smsc
 smsc = at
 smsc-id = usb0-modem
 my-number = 1234
 modemtype = auto
 device = /dev/ttyUSB0

 #---------------------------------------------
 # SMSBOX SETUP
 #
 # Smsbox(es) do higher-level SMS handling after they have been received from
 # SMS centers by bearerbox, or before they are given to bearerbox for delivery

 group = smsbox
 bearerbox-host = 127.0.0.1
 sendsms-port = 13013
 sendsms-chars = "0123456789 +-"
 log-file = "/var/log/kannel/smsbox.log"
 log-level = 0
 access-log = "/var/log/kannel/smsbox-access.log"
 reply-couldnotfetch = "Your message could not be processed at this time.  Please try again later. (err=couldnotfetch)"
 reply-requestfailed = "Your message could not be processed at this time.  Please try again later. (err=requestfailed)"
 reply-couldnotrepresent = "Your message could not be processed at this time.  Please try again later. (err=couldnotrepresent)"
 http-request-retry = 3
 http-queue-delay = 10

 # SEND-SMS USERS
 #
 # These users are used when Kannel smsbox sendsms interface is used to
 # send PUSH sms messages, i.e. calling URL like
 # http://kannel.machine:13013/cgi-bin/sendsms?username=tester&password=foobar...

 # This is the username and password that RapidSMS uses to deliver SMSes to
 # Kannel.  It must also set the 'smsc' variable in the query string, so that
 # Kannel knows which SMSC to use to route the message.

 group = sendsms-user
 username = rapidsms
 password = CHANGE ME
 user-deny-ip = "*.*.*.*"
 user-allow-ip = "127.0.0.1;ip.of.rapidsms.server;"

 #---------------------------------------------
 # SERVICES
 #
 # These are 'responses' to sms PULL messages, i.e. messages arriving from
 # handsets. The response is based on message content. Only one sms-service is
 # applied, using the first one to match.

 # The 'ping-kannel' service let's you check to see if Kannel is running,
 # even if RapidSMS is offline for some reason.

 group = sms-service
 keyword = ping-kannel
 text = "Kannel is online and responding to messages."

 # There should be always a 'default' service. This service is used when no
 # other 'sms-service' is applied.  These relay incoming messages from Zain
 # and TNM, respectively, to the appropriate HTTP backend URLs in RapidSMS.
 # By setting 'accepted-smsc', we are assured that messages are routed to
 # the appropriate backend in RapidSMS.

 group = sms-service
 keyword = default
 accepted-smsc = usb0-modem
 # don't send a reply here (it'll come through sendsms):
 max-messages = 0
 get-url = http://my.rapidsms.server.com:8080/?id=%p&text=%a&charset=%C&coding=%c
	#
	# CONFIGURATION FOR USING SMS KANNEL WITH RAPIDSMS
	#
	# For any modifications to this file, see Kannel User Guide
	# If that does not help, see Kannel web page (http://www.kannel.org) and
	# various online help and mailing list archives
	#
	# Notes on those who base their configuration on this:
	# 1) check security issues! (allowed IPs, passwords and ports)
	# 2) groups cannot have empty rows inside them!
	# 3) read the user guide
	#
	# Kalle Marjola for Kannel project 2001, 2004

	include = "/etc/kannel/modems.conf"

	#---------------------------------------------
	# CORE
	#
	# There is only one core group and it sets all basic settings
	# of the bearerbox (and system). You should take extra notes on
	# configuration variables like 'store-file' (or 'store-dir'),
	# 'admin-allow-ip' and 'access.log'


	group = core
	admin-port = 13000
	smsbox-port = 13001
	admin-password = CHANGE ME
	status-password = CHANGE ME
	admin-deny-ip = "..."
	admin-allow-ip = "127.0.0.1"
	box-deny-ip = "..."
	box-allow-ip = "127.0.0.1"
	log-file = "/var/log/kannel/bearerbox.log"
	log-level = 0

	#---------------------------------------------
	# SMSC CONNECTIONS
	#
	# SMSC connections are created in bearerbox and they handle SMSC specific
	# protocol and message relying. You need these to actually receive and send
	# messages to handset, but can use GSM modems as virtual SMSCs


	# This is a fake smsc connection, _only_ used to test the system and services.
	# It really cannot relay messages to actual handsets!

	#group = smsc
	#smsc = fake
	#smsc-id = FAKE
	#port = 20000
	#connect-allow-ip = 127.0.0.1

	group = smsc
	smsc = at
	smsc-id = usb0-modem
	my-number = 1234
	modemtype = auto
	device = /dev/ttyUSB0

	#---------------------------------------------
	# SMSBOX SETUP
	#
	# Smsbox(es) do higher-level SMS handling after they have been received from
	# SMS centers by bearerbox, or before they are given to bearerbox for delivery

	group = smsbox
	bearerbox-host = 127.0.0.1
	sendsms-port = 13013
	sendsms-chars = "0123456789 +-"
	log-file = "/var/log/kannel/smsbox.log"
	log-level = 0
	access-log = "/var/log/kannel/smsbox-access.log"
	reply-couldnotfetch = "Your message could not be processed at this time. Please try again later. (err=couldnotfetch)"
	reply-requestfailed = "Your message could not be processed at this time. Please try again later. (err=requestfailed)"
	reply-couldnotrepresent = "Your message could not be processed at this time. Please try again later. (err=couldnotrepresent)"
	http-request-retry = 3
	http-queue-delay = 10

	# SEND-SMS USERS
	#
	# These users are used when Kannel smsbox sendsms interface is used to
	# send PUSH sms messages, i.e. calling URL like
	# http://kannel.machine:13013/cgi-bin/sendsms?username=tester&password=foobar...

	# This is the username and password that RapidSMS uses to deliver SMSes to
	# Kannel. It must also set the 'smsc' variable in the query string, so that
	# Kannel knows which SMSC to use to route the message.

	group = sendsms-user
	username = rapidsms
	password = CHANGE ME
	user-deny-ip = "..."
	user-allow-ip = "127.0.0.1;ip.of.rapidsms.server;"

	#---------------------------------------------
	# SERVICES
	#
	# These are 'responses' to sms PULL messages, i.e. messages arriving from
	# handsets. The response is based on message content. Only one sms-service is
	# applied, using the first one to match.

	# The 'ping-kannel' service let's you check to see if Kannel is running,
	# even if RapidSMS is offline for some reason.

	group = sms-service
	keyword = ping-kannel
	text = "Kannel is online and responding to messages."

	# There should be always a 'default' service. This service is used when no
	# other 'sms-service' is applied. These relay incoming messages from Zain
	# and TNM, respectively, to the appropriate HTTP backend URLs in RapidSMS.
	# By setting 'accepted-smsc', we are assured that messages are routed to
	# the appropriate backend in RapidSMS.

	group = sms-service
	keyword = default
	accepted-smsc = usb0-modem
	# don't send a reply here (it'll come through sendsms):
	max-messages = 0
	get-url = http://my.rapidsms.server.com:8080/?id=%p&text=%a&charset=%C&coding=%c