U-Boot SPL 2017.05-armbian (Jun 01 2017 - 21:46:19) DRAM: 2048 MiB Trying to boot from MMC1 U-Boot 2017.05-armbian (Jun 01 2017 - 21:46:19 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Plus 2E DRAM: 2 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: phy interface7 eth0: ethernet@1c30000 Hit any key to stop autoboot: 0 38518 bytes read in 140 ms (268.6 KiB/s) Unknown command 'bmp' - try 'help' switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3565 bytes read in 206 ms (16.6 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 152 bytes read in 176 ms (0 Bytes/s) 3995535 bytes read in 632 ms (6 MiB/s) 5819424 bytes read in 806 ms (6.9 MiB/s) Found mainline kernel configuration 26719 bytes read in 573 ms (44.9 KiB/s) 4179 bytes read in 266 ms (14.6 KiB/s) Applying kernel provided DT fixup script (sun8i-h3-fixup.scr) ## Executing script at 44000000 ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 3995471 Bytes = 3.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 49c30000, end 49fff74f ... OK reserving fdt memory region: addr=43000000 size=6c000 Loading Device Tree to 49bc1000, end 49c2ffff ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Loading, please wait... Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Will now check root file system ... fsck from util-linux 2.25.2 [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1 /dev/mmcblk0p1: clean, 57590/81280 files, 229941/324864 blocks done. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. Welcome to Debian GNU/Linux 8 (jessie)! Expecting device dev-ttyS0.device... [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Encrypted Volumes. [ OK ] Reached target Paths. [ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point. [ OK ] Reached target Swap. [ OK ] Created slice Root Slice. [ OK ] Listening on Delayed Shutdown Socket. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Created slice User and Session Slice. [ OK ] Listening on udev Control Socket. [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on Journal Socket. [ OK ] Created slice System Slice. Starting Increase datagram queue length... Starting Nameserver information manager... Starting Restore / save the current clock... Mounting POSIX Message Queue File System... Starting Create list of required static device nodes...rrent kernel... Mounting Debug File System... Starting udev Coldplug all Devices... Starting LSB: Set keymap... [ OK ] Created slice system-serial\x2dgetty.slice. Starting Load Kernel Modules... [ OK ] Reached target Slices. [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Increase datagram queue length. [ OK ] Started Restore / save the current clock. [ OK ] Started Create list of required static device nodes ...current kernel. [ OK ] Started LSB: Set keymap. [ OK ] Started Load Kernel Modules. [ OK ] Started Nameserver information manager. [ OK ] Started udev Coldplug all Devices. Mounting Configuration File System... Mounting FUSE Control File System... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... [ OK ] Listening on Syslog Socket. [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Configuration File System. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. Starting Copy rules generated while the root was ro... Starting LSB: Set preliminary keymap... Starting LSB: Tune IDE hard disks... [ OK ] Started Copy rules generated while the root was ro. [ OK ] Started LSB: Tune IDE hard disks. [ OK ] Found device /dev/ttyS0. [ OK ] Reached target Sound Card. [ OK ] Created slice system-ifup.slice. [ OK ] Started LSB: Set preliminary keymap. Starting Remount Root and Kernel File Systems... [ OK ] Started Remount Root and Kernel File Systems. Starting Various fixups to make systemd work better on Debian... [ OK ] Reached target Local File Systems (Pre). Mounting /tmp... Starting Load/Save Random Seed... [ OK ] Mounted /tmp. [ OK ] Started Various fixups to make systemd work better on Debian. [ OK ] Started Load/Save Random Seed. [ OK ] Reached target Local File Systems. Starting Armbian enhanced Log2Ram... Starting Create Volatile Files and Directories... [ OK ] Reached target Remote File Systems. Starting LSB: Prepare console... Starting LSB: Raise network interfaces.... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Armbian enhanced Log2Ram. [ OK ] Started LSB: Prepare console. [ OK ] Started Update UTMP about System Boot/Shutdown. Starting LSB: Set console font and keymap... Starting Journal Service... [ OK ] Started Journal Service. Starting Trigger Flushing of Journal to Persistent Storage... [ OK ] Started Trigger Flushing of Journal to Persistent Storage. [ OK ] Started LSB: Raise network interfaces.. Starting ifup for eth0... [ OK ] Started ifup for eth0. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. [ OK ] Started LSB: Set console font and keymap. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Timers. Starting Armbian filesystem resize service... Starting Restore Sound Card State... [ OK ] Started Restore Sound Card State. [ OK ] Started Armbian filesystem resize service. [ OK ] Reached target Basic System. Starting Entropy daemon using the HAVEGE algorithm... [ OK ] Started Entropy daemon using the HAVEGE algorithm. Starting Armbian first run tasks... [ OK ] Started Armbian first run tasks. [ OK ] Created slice system-getty.slice. Starting System Logging Service... Starting Regular background program processing daemon... [ OK ] Started Regular background program processing daemon. Starting OpenBSD Secure Shell server... [ OK ] Started OpenBSD Secure Shell server. Starting Network Manager... Starting /etc/rc.local Compatibility... Starting Login Service... Starting D-Bus System Message Bus... [ OK ] Started D-Bus System Message Bus. Starting Permit User Sessions... Starting LSB: Start/stop sysstat's sadc... Starting LSB: Advanced IEEE 802.11 management daemon... Starting LSB: Start NTP daemon... Starting LSB: disk temperature monitoring daemon... Starting LSB: Load kernel modules needed to enable cpufreq scaling... Starting LSB: Armbian gathering hardware information... Starting LSB: Starts LIRC daemon.... [ OK ] Started System Logging Service. [ OK ] Started /etc/rc.local Compatibility. [ OK ] Started Login Service. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started LSB: disk temperature monitoring daemon. [ OK ] Started Permit User Sessions. [ OK ] Started LSB: Start/stop sysstat's sadc. Starting Serial Getty on ttyS0... [ OK ] Started Serial Getty on ttyS0. Starting Getty on tty1... [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started LSB: Start NTP daemon. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling. [ OK ] Started LSB: Starts LIRC daemon.. Starting LSB: set CPUFreq kernel parameters... [ OK ] Started LSB: set CPUFreq kernel parameters. Starting LSB: Set sysfs variables from /etc/sysfs.conf... [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf. [ OK ] Started LSB: Armbian gathering hardware information. Starting Authenticate and Authorize Users to Run Privileged Tasks... [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks. [ OK ] Started Network Manager. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. Debian GNU/Linux 8 orangepiplus2e ttyS0 orangepiplus2e login: