# Booting with UBoot for Raspberry

```
curl -O http://people.freebsd.org/~gonzo/arm/rpi/raspberry-pi-uboot-20120621.tar.gz

yum install makebootfat dosfstools

dd if=/dev/zero of=uboot.img bs=1M count=2048
losetup /dev/loop1 uboot.img
kpartx -av /dev/loop1
fdisk /dev/loop1
Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-261, default 1): 
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-261, default 261): 
Using default value 261

Command (m for help): a
Partition number (1-4): 1

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 22: Invalid argument.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
kpartx -av /dev/loop1
mkfs.vfat /dev/mapper/loop1p1
mkdir /tmp/x
mount -o loop /dev/mapper/loop1p1 /tmp/x
cd /tmp/x
tar zxvf /root/raspberry-pi-uboot-20120621.tar.gz
cd && umount /tmp/x
losetup -d /dev/loop0

qemu-system-arm -kernel kernel-qemu -cpu arm1176 -m 256 -M versatilepb -no-reboot -serial stdio -append "root=/dev/sda1 panic=1" -hda uboot.img -net nic -net user -vnc :1 -net tap,ifname=vnet1,script=no,downscript=no
```

Same failure as with installer...