Nick Cabatoff ncabatoff

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

Don't use VPN services.

No, seriously, don't. You're probably reading this because you've asked what VPN service to use, and this is the answer.

Note: The content in this post does not apply to using VPN for their intended purpose; that is, as a virtual private (internal) network. It only applies to using it as a glorified proxy, which is what every third-party "VPN provider" does.

A Russian translation of this article can be found here, contributed by Timur Demin.
A Turkish translation can be found here, contributed by agyild.
There's also this article about VPN services, which is honestly better written (and has more cat pictures!) than my article.

Whether you're trying to give back to the open source community or collaborating on your own projects, knowing how to properly fork and generate pull requests is essential. Unfortunately, it's quite easy to make mistakes or not know what you should do when you're initially learning the process. I know that I certainly had considerable initial trouble with it, and I found a lot of the information on GitHub and around the internet to be rather piecemeal and incomplete - part of the process described here, another there, common hangups in a different place, and so on.

In an attempt to coallate this information for myself and others, this short tutorial is what I've found to be fairly standard procedure for creating a fork, doing your work, issuing a pull request, and merging that pull request back into the original project.

Creating a Fork

Just head over to the GitHub page and click the "Fork" button. It's just that simple. Once you've done that, you can use your favorite git client to clone your repo or j

	import bytes from '../../vendor/bytes/index.js'
	const MAX_WIDTH = 600
	const MAX_HEIGHT = 600
	const { createFFmpeg, fetchFile } = FFmpeg
	let ffmpeg

	export async function compressAndGetThumb (file, maxVideoSize, progressCb) {
	const objectUrl = URL.createObjectURL(file)
	const videoEl = document.createElement('video')
	videoEl.addEventListener('error', console.log)

	job "grafana" {
	datacenters = ["dc1"]
	type = "service"

	group "grafana" {
	count = 1

	restart {
	attempts = 10
	interval = "5m"

	default['sshd']['sshd_config']['AuthenticationMethods'] = 'publickey,keyboard-interactive:pam'
	default['sshd']['sshd_config']['ChallengeResponseAuthentication'] = 'yes'
	default['sshd']['sshd_config']['PasswordAuthentication'] = 'no'