# Anet A8 Marlin firmware config with bed auto-leveling

1. Install Arduino IDE
2. Install https://github.com/SkyNet3D/anet-board
3. Clone https://github.com/MarlinFirmware/Marlin
4. Copy `Configuration.h` from this gist to `Marlin/Configuration.h`
5. Copy `Marlin/example_configurations/Anet/A8/Configuration_adv.h` to `Marlin/Configuration_adv.h`
6. Open `Marlin.ino` with Arduino IDE, choose `Anet 1.0` board and corresponding port.
7. Press `Upload`