Skip to content

Instantly share code, notes, and snippets.

@vulcangz

vulcangz/filter.d_nginx-auth.conf

Forked from JulienBlancher/filter.d_nginx-auth.conf
Created February 24, 2023 07:34
Show Gist options
  • Save vulcangz/50946790657bddb49dc76a8a96d94e4f to your computer and use it in GitHub Desktop.
Save vulcangz/50946790657bddb49dc76a8a96d94e4f to your computer and use it in GitHub Desktop.
Download ZIP
Fail2ban Config with Nginx and SSH
Raw
filter.d_nginx-auth.conf
#
# Auth filter /etc/fail2ban/filter.d/nginx-auth.conf:
#
# Blocks IPs that fail to authenticate using basic authentication
#
[Definition]
failregex = no user/password was provided for basic authentication.*client: <HOST>
user .* was not found in.*client: <HOST>
user .* password mismatch.*client: <HOST>
ignoreregex =
Raw
jail.local
# Fail2Ban configuration file.
#
# This file was composed for Debian systems from the original one
# provided now under /usr/share/doc/fail2ban/examples/jail.conf
# for additional examples.
#
# To avoid merges during upgrades DO NOT MODIFY THIS FILE
# and rather provide your changes in /etc/fail2ban/jail.local
#
# Author: Yaroslav O. Halchenko <[email protected]>
#
# $Revision$
#
# The DEFAULT allows a global definition of the options. They can be overridden
# in each jail afterwards.
[DEFAULT]
# "ignoreip" can be an IP address, a CIDR mask or a DNS host
ignoreip = 127.0.0.1/8
findtime = 86400
bantime = -1
maxretry = 3
# "backend" specifies the backend used to get files modification. Available
# options are "gamin", "polling" and "auto".
# yoh: For some reason Debian shipped python-gamin didn't work as expected
# This issue left ToDo, so polling is default backend for now
backend = auto
#
# Destination email address used solely for the interpolations in
# jail.{conf,local} configuration files.
destemail = root@localhost
#
# ACTIONS
#
# Default banning action (e.g. iptables, iptables-new,
# iptables-multiport, shorewall, etc) It is used to define
# action_* variables. Can be overridden globally or per
# section within jail.local file
banaction = iptables-multiport
# email action. Since 0.8.1 upstream fail2ban uses sendmail
# MTA for the mailing. Change mta configuration parameter to mail
# if you want to revert to conventional 'mail'.
mta = sendmail
# Default protocol
protocol = tcp
# Specify chain where jumps would need to be added in iptables-* actions
chain = INPUT
#
# Action shortcuts. To be used to define action parameter
# The simplest action to take: ban only
action_ = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
# ban & send an e-mail with whois report to the destemail.
action_mw = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
%(mta)s-whois[name=%(__name__)s, dest="%(destemail)s", protocol="%(protocol)s", chain="%(chain)s"]
# ban & send an e-mail with whois report and relevant log lines
# to the destemail.
action_mwl = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
%(mta)s-whois-lines[name=%(__name__)s, dest="%(destemail)s", logpath=%(logpath)s, chain="%(chain)s"]
# Choose default action. To change, just override value of 'action' with the
# interpolation to the chosen action shortcut (e.g. action_mw, action_mwl, etc) in jail.local
# globally (section [DEFAULT]) or per specific section
action = %(action_)s
#
# JAILS
#
# Next jails corresponds to the standard configuration in Fail2ban 0.6 which
# was shipped in Debian. Enable any defined here jail by including
#
# [SECTION_NAME]
# enabled = true
#
# in /etc/fail2ban/jail.local.
#
# Optionally you may override any other parameter (e.g. banaction,
# action, port, logpath, etc) in that section within jail.local
[ssh]
enabled = true
port = ssh
filter = sshd
logpath = /var/log/auth.log
[dropbear]
enabled = false
port = ssh
filter = sshd
logpath = /var/log/dropbear
maxretry = 6
# Generic filter for pam. Has to be used with action which bans all ports
# such as iptables-allports, shorewall
[pam-generic]
enabled = false
# pam-generic filter can be customized to monitor specific subset of 'tty's
filter = pam-generic
# port actually must be irrelevant but lets leave it all for some possible uses
port = all
banaction = iptables-allports
port = anyport
logpath = /var/log/auth.log
maxretry = 6
[xinetd-fail]
enabled = false
filter = xinetd-fail
port = all
banaction = iptables-multiport-log
logpath = /var/log/daemon.log
maxretry = 2
[ssh-ddos]
enabled = true
port = ssh
filter = sshd-ddos
logpath = /var/log/auth.log
#
# HTTP servers
#
[nginx-auth]
enabled = true
filter = nginx-auth
action = iptables-multiport[name=NoAuthFailures, port="http,https"]
logpath = /var/log/nginx/*error*.log
[nginx-login]
enabled = false
filter = nginx-login
action = iptables-multiport[name=NoLoginFailures, port="http,https"]
logpath = /var/log/nginx/*access*.log
[nginx-badbots]
enabled = true
filter = apache-badbots
action = iptables-multiport[name=BadBots, port="http,https"]
logpath = /var/log/nginx/*access*.log
maxretry = 1
[nginx-noscript]
enabled = false
action = iptables-multiport[name=NoScript, port="http,https"]
filter = nginx-noscript
logpath = /var/log/nginx/*access*.log
maxretry = 20
[nginx-proxy]
enabled = true
action = iptables-multiport[name=NoProxy, port="http,https"]
filter = nginx-proxy
logpath = /var/log/nginx/*access*.log
maxretry = 0
[nginx-dos]
enabled = true
port = http
filter = nginx-dos
logpath = /var/log/nginx/*access*.log
findtime = 120
maxretry = 200
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment