ace           - Command for generic read/write to ace device.
alias         - Displays, creates, or deletes UEFI Shell aliases.
amcc          - Command for testing the AMCC functionality.
amux          - Analog Mux selection command
ASPTool       - ASPTool command interface.
attrib        - Displays or modifies the attributes of files or directories.
audio         - General audio subsystem control.
audiohid      - Manages HID report operations on audio blocks
audioparam    - Get or set audio parameters.
audioreg      - Manages register operations on audio blocks.
base64        - Convert file to/from base64
baseband      - Command to control/test baseband functionality.
baud          - Gets or sets UART baud rate.
bcfg          - Manages the boot and driver options that are stored in NVRAM.
bl            - BackLight Test(I2C)
blockdevice   - Show information about boot devices. Bare quantities are in bytes.
bluetooth     - [bluetooth <Command>]
boardid       - Get the board Id
boardrev      - Get the board rev
bonfire       - Command to control/test Run Bonfire
bootcfg       - Get the boot cfg
buckcheck     - Command for buck voltage check.
button        - Test individual buttons on the unit. Press Ctrl+C to escape button press via serial
buttoncnt     - [--dqe] Count button presses on the unit
c26           - Provides control over C26 chipsets
camisp        - Camera command that can run in separate steps
cbcolor       - iPX Control Bit - Set screen color based on number of passed station
cbdump        - iPX Control Bit - Dump the CB area from the NAND
cberase       - iPX Control Bit - Erase a control bit
cbinit        - iPX Control Bit - Initialize control bit area
cbread        - Test commands for iPX Control Bit Read
cbreadall     - Test commands for iPX Control Bit - read all
cbskip        - iPX Control Bit - Skip control bits
cbwrite       - Test commands for for iPX Control Bit Write
cd            - Displays or changes the current directory.
charge        - Charge controls for system
chipid        - Get the chip Id
clkmon        - [clkmon <Command>]
cls           - Clears the console output and optionally changes the background and foreground color.
colorgrad     - Command to create preset or custom color gradients on the display.
comp          - Compares the contents of two files on a byte-for-byte basis.
connect       - Binds a driver to a specific device and starts the driver.
consoleformat - Command to control the formatting of text display on serial output mediums like the console
consoleprint  - Print to ConsoleRouter
consolerouter - Main command that deals with all things console in the system
consolesinkctrl- Manage the console sink controls
copy          - Copies one or more files or directories to another location.
cp            - copy files and directories as in UNIX.
crush         - Compress/uncompress a file using gzip/zlib
csi           - Provide common controls to all CSI coprocs
date          - Displays and sets the current date for the system.
dblk          - Displays one or more blocks from a block device.
dcp           - dcp <Command>
debug         - Turns on/off global debug levels in the system
device        - List all devices of the system.
devices       - Displays the list of devices managed by UEFI drivers.
devtree       - Displays the UEFI Driver Model compliant device tree.
dh            - Displays the device handles in the UEFI environment.
digest        - Hash Data in a file.
DisCfg#       - Test commands for display CFG systemcfg
disconnect    - Disconnects one or more drivers from the specified devices.
DisOpts       - Test commands for display OPTS systemcfg
display       - Command for testing display device.
displayid     - Get the display Id
DisplayShape  - Display a shape on the unit's screen.
displaytext   - Command for displaying text on unit's screen.
dmem          - Displays the contents of system or device memory.
dmpstore      - Manages all UEFI variables.
dprepeater    - Test commands for non-LTT DisplayPort Repeater
dptx          - Command to exercise the DisplayPort Phy(s)
drivers       - Displays the UEFI driver list.
drvcfg        - Invokes the driver configuration.
drvdiag       - Invokes the Driver Diagnostics Protocol.
dt            - Embedded dt command interface
dwi           - BackLight Test (DWI)
echo          - Controls script file command echoing or displays a message.
edit          - Provides a full screen text editor for ASCII or UCS-2 files.
eficompress   - Compresses a file using UEFI Compression Algorithm.
efidecompress - Decompresses a file using UEFI Decompression Algorithm.
efidmns       - dimenions command interface
egpio         - Embedded GPIO command interface
else          - Identifies the code executed when 'if' is FALSE.
endfor        - Ends a 'for' loop.
endif         - Ends the block of a script controlled by an 'if' statement.
event         - Signal EFI event groups.
false         - Execute unsuccessfully.
fan           - Provide controls to system fans (smc by default)
fdrdecode     - Command to decode FDR file and write the payload to serial or a file
filelog       - Command to control/test filelog functionality
for           - Starts a loop based on 'for' syntax.
getmtc        - Gets the MTC from BootServices and displays it.
getnonce      - iPX Control Bit - generate a salt value for control-bit write authentication
getvol        - Get audio block volume information.
goto          - Moves around the point of execution in a script.
gps           - Command to control/test gps functionality
hallsensor    - Test riser readings
hash          - This command generates a secure hash.
help          - Displays the UEFI Shell command list or verbose command help.
hexedit       - Provides a full screen hex editor for files, block devices, or memory.
hid           - HID related test commands
history       - Prints out previously typed commands in command list history log
i2c           - Command for generic read/write to I2C device.
if            - Executes commands in specified conditions.
key           - Read buttons' status from AP side and PMU side
listclocks    - List frequency of PMGR clocks.
load          - Loads a UEFI driver into memory.
loadpcirom    - Loads a PCI Option ROM.
loopaudio     - Plays/Record full-duplex audio out/in through selected 'playable' and 'recordable' ports on an audio block
ls            - Lists the contents of a directory or file information.
Lua           - Enter an interactive lua shell.
Lua52         - Enter an interactive lua shell.
map           - Displays or defines file system mappings.
mapper        - Command for dumping AppleMapperProtocol mappings.
mbt           - Menu Button Test
measureclock  - measureclock related test commands
memcat        - Run data and address patterns to exercise DRAM subsystem.
memmap        - Displays the memory map maintained by the UEFI environment.
memrw         - Run data and address patterns to exercise DRAM subsystem.
menu          - menu <option>
microtar      - manipulate tape archives using microtar
mikey         - Mikey Tests
mipi          - mipi Command to interact with mipi.
mkdir         - Creates one or more new directories.
mlbsn         - Test commands for reading MLB serial number
mm            - Displays or modifies MEM/MMIO/IO/PCI/PCIE address space.
mode          - Displays or changes the console output device mode.
mv            - Moves one or more files to a destination within or between file systems.
nand          - Embedded nand command interface.
nandcsid      - Embedded nandcsid command interface.
NANDInfoTool  - Embedded NANDInfoTool command interface.
nandppnfwver  - Embedded nandppnfwver command interface.
nandsize      - Embedded nandsize command interface.
nanduid       - Embedded nanduid command interface.
network       - Command to control/test Ethernet MAC and PHY functionality
NVMeEANTool   - Write and read images to/from the EAN
nvram         - Print or modify NVRAM variables
nvrams        - Print or modify system NVRAM variables
openinfo      - Displays the protocols and agents associated with a handle.
parse         - Retrieves a value from a standard format output file.
pattern       - Command for testing LCD Display pattern.
pause         - Pauses a script and waits for an operator to press a key.
pci           - Displays PCI device list or PCI function configuration space and PCIe extended
configuration space.
pcie          - [pcie <Command>]
pdump         - Play pdumps
pertos        - Boot into pertos image or gather logs
physaddr      - Decodes a physical address into bank/column/row/etc.
playaudio     - Plays audio out through a selected 'playable' port.
pmu           - Pmu related commands.
pmuadc        - Test commands for Calibration/Reading/Listing Channels
pmubutton     - Command for PMU button test.
pmuevent      - Wait until the unit is unplugged then go to standby.
pmugpio       - Set a PMU GPIO to a certain state
pmureg        - Print the values of all the pmu registers.
pmurw         - Read or write data to a particular PMU registers.
pmuset        - Set the buck and ldo voltages value.
pmustat       - Return the status of pmu registers.
pmutemp       - Command for PMU TEMP test.
preoslog      - Prints out iBoot serial output
processaudio  - Post-processes audio data using various audio filters registered in the system.
pwm           - pwm (--port|-p port_index) [--freq|-f freq_in_hz] [--duty|-d duty_cycle] [--state|-s on|off] [--sample] [--get]
ramlog        - Command to manage the ramlog console sink which can be used for logging text to RAM for timing sensitive issues
reconnect     - Reconnects drivers to the specific device.
recordaudio   - Records audio in through a selected 'recordable' port
reg           - Provides control over various peripheral registers
repeat        - Repeats the given command line according to the time-specification.
reset         - Resets the system
rm            - Deletes one or more files or directories.
roleid        - Get the role Id
routeaudio    - Sets up audio routing.
rtc           - Set or get the device time
sensor        - General command that interfaces with the various sensors in the system
sensorReg     - General command that allows for reading/writing sensor chipset registers
sep           - sep <options>
sermode       - Sets serial port attributes.
set           - Displays or modifies UEFI Shell environment variables.
setsize       - Adjusts the size of a file.
setvar        - Displays or modifies a UEFI variable.
setvol        - Sets audio block volume levels.
shift         - Shifts in-script parameter positions.
shutdown      - Wait until the unit is unplugged then go to standby.
sleep         - Command for setting system to specified sleep state.
smbiosview    - Displays SMBIOS information.
smc           - Embedded smc command interface
smclog        - Command to control/test thermal functionality
Smokey        - EFI diag scripting sequencer.
Smokey52      - EFI diag scripting sequencer.
SmokeyShell   - EFI diag scripting sequencer debug shell
sn            - Test commands for reading/writing serial number
soc           - Command for displaying SoC info.
socgpio       - Set a GPIO to a certain state
spi           - [spi <Command>]
spkid         - Return 1 bit Speaker ID
spmi          - [spmi <Command>]
stall         - Stalls the operation for a specified number of microseconds.
station       - Command to trigger start/stop command
stockholm     - Issue commands to stockholm
stopaudio     - Stop audio out through a selected 'playable/recordable' port
strobe        - Command to control the Strobe on the System.
syscfg        - Test commands for initing/reading/writing values to the syscfg area
sysinfo       - Test commands for dumping system information
system        - Command to display basic info about the unit.
temperature   - temperature <options>
testmemory    - Run data and address patterns to exercise DRAM subsystem.
testmp        - boot up second core for simple tests
thermalmonitor- Command to control/test thermal functionality
thermalvirus  - thermalvirus <options>
time          - Time the given command line in milliseconds or microseconds.
titanium      - DMA Throughput Test using Titanium DMA Controller PCIe Endpoint.
touch         - Command for the Touch subsystem
true          - Execute successfully.
type          - Sends the contents of a file to the standard output device.
uartloopback  - Perform a loopback test on the specified uart. Note that you will have to put the chip into loopback mode using separate commands.
uartpassthrough- pass through uart traffic from dock uart to select uart
uartrx        - Receive and store message from uart <uart #>. It will send the message back to uart <uart #> when a <ExitString> is detected.
uarttx        - send message to the selected uart
unload        - Unloads a driver image that was already loaded.
upy           - Run a MicroPython script.
usb           - General usb command to enable or disable different client drivers.
usbfs         - Enables/Disables UsbFS (Filesystem-over-USB)
usbp          - Test USB Present
var           - Print or modify run-time variables
ver           - Displays UEFI Firmware version information.
version       - Show iEFI Build Information.
vol           - Displays or modifies information about a disk volume.
wait          - [ms]; Wait ms milliseconds.
wakeevent     - Select wake event for wakeup from PMU STANDBY or Hibernate mode.
wakeeventsmanager- wakeeventsmanager <options>
wfi           - Wfi test command.
wifi          - Command to control/test wifi functionality
writefile     - Write text to a file
zerofile      - Zero the contents of an existing file

Help usage:help [cmd|pattern|special] [-usage] [-verbose] [-section name][-b]