Occasionally we will deploy a virtual instance into our KVM infrastructure and realize after the fact that we need more local disk space available. This is the process we use to expand the disk image. This process assumes the following: - You're using legacy disk partitions. The process for LVM is similar and I will describe that in another post. - The partition you need to resize is the last partition on the disk. This process will work with either a `qcow2` or `raw` disk image. For `raw` images you can also run `fdisk` on the host, potentially saving yourself a reboot, but that's less convenient for `qcow2` format images. --- We start with a 5.5G root filesystem with 4.4G free: [root@localhost ~]# df -h / Filesystem Size Used Avail Use% Mounted on /dev/vda2 5.5G 864M 4.4G 17% / We need to shut down the system to grow the underlying image: [root@localhost ~]# poweroff On the host, we use the `qemu-img resize` command to grow the image. First we need the path to the underlying disk image: [lars@madhatter blog]$ virsh -c qemu:///system dumpxml lars-test-0 | grep file And now we increase the image size by 10G: [lars@madhatter blog]$ sudo qemu-img resize /var/lib/libvirt/images/lars-test-0.img +10G Image resized. Now reboot the instance: [lars@madhatter blog]$ virsh -c qemu:///system start lars-test-0 And login in on the console: [lars@madhatter blog]$ virsh -c qemu:///system console lars-test-0 Connected to domain lars-test-0 Escape character is ^] Fedora release 17 (Beefy Miracle) Kernel 3.6.2-4.fc17.x86_64 on an x86_64 (ttyS0) localhost login: root Password: We're going to use `fdisk` to modify the partition layout. Run `fdisk` on the system disk: [root@localhost ~]# fdisk /dev/vda Welcome to fdisk (util-linux 2.21.2). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Print out the existing partition table and verify that you really are going to be modifying the final partition: Command (m for help): p Disk /dev/vda: 19.3 GB, 19327352832 bytes 16 heads, 63 sectors/track, 37449 cylinders, total 37748736 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00007d9f Device Boot Start End Blocks Id System /dev/vda1 * 2048 1026047 512000 83 Linux /dev/vda2 1026048 5154815 2064384 82 Linux swap / Solaris /dev/vda3 5154816 16777215 5811200 83 Linux Delete and recreate the final partition, in this case `/dev/vda3`... Command (m for help): d Partition number (1-4): 3 Partition 3 is deleted ...and create a new partition, accepting all the defaults. This will create a new partition starting int he same place and extending to the end of the disk: Command (m for help): n Partition type: p primary (2 primary, 0 extended, 2 free) e extended Select (default p): p Partition number (1-4, default 3): 3 First sector (5154816-37748735, default 5154816): Using default value 5154816 Last sector, +sectors or +size{K,M,G} (5154816-37748735, default 37748735): Using default value 37748735 Partition 3 of type Linux and of size 15.6 GiB is set You can print out the new partition table to see that indeed `/dev/vda3` is now larger: Command (m for help): p Disk /dev/vda: 19.3 GB, 19327352832 bytes 16 heads, 63 sectors/track, 37449 cylinders, total 37748736 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00007d9f Device Boot Start End Blocks Id System /dev/vda1 * 2048 1026047 512000 83 Linux /dev/vda2 1026048 5154815 2064384 82 Linux swap / Solaris /dev/vda3 5154816 37748735 16296960 83 Linux Write the changes to disk: Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. WARNING: Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks. **Note the warning!** The kernel has cached a copy of the old partition table. We need to reboot the system before our changes are visible! So we reboot the system: [root@localhost ~]# reboot And log back in. Run `df` to see the current size of the root filesystem: [root@localhost ~]# df -h / Filesystem Size Used Avail Use% Mounted on /dev/vda3 5.5G 864M 4.4G 17% / Now run `resize2fs` to resize the root filesystem so that it expands to fill our extended `/dev/vda3`: [root@localhost ~]# resize2fs /dev/vda3 resize2fs 1.42.3 (14-May-2012) Filesystem at /dev/vda3 is mounted on /; on-line resizing required old_desc_blocks = 1, new_desc_blocks = 1 The filesystem on /dev/vda3 is now 4074240 blocks long. Run `df` again to see that we now have additional space available: [root@localhost ~]# df -h / Filesystem Size Used Avail Use% Mounted on /dev/vda3 16G 867M 14G 6% / [root@localhost ~]#