ItsAdventureTime · April 11, 2016 11:31 · Jan 14, 2012 · Jan 3, 2012 · Dec 28, 2011 · Dec 28, 2011
diff --git a/.rtorrent.rc b/.rtorrent.rc
@@ -1,3 +1,4 @@
+
 # This is an example resource file for rTorrent. Copy to
 # ~/.rtorrent.rc and enable/modify the options as needed. Remember to
 # uncomment the options you wish to enable.
@@ -14,7 +15,7 @@ max_peers_seed = 50
 max_uploads = 10
 
 # Maximum number of simultaneous downloads
-max_downloads_global = 3
+max_downloads_global = 10
 # Maximum number of simultaneous uploads
 max_uploads_global = 20
 
@@ -44,7 +45,6 @@ schedule = session_save,240,300,session_save=
 
 # Enable the default ratio group.
 ratio.enable=
-
 # Change the limits, the defaults should be sufficient.
 # Upload to a minimum ratio of 4.0
 ratio.min.set=400
@@ -74,10 +74,32 @@ port_random = yes
 #
 encryption = allow_incoming,try_outgoing,enable_retry,prefer_plaintext
 
-# Sort the seeding view by the upload rate
-view_sort_current = seeding,greater=d.get_up_rate=
-view_sort_new = seeding,greater=d.get_up_rate=
-schedule = sort,5,2,view_sort=seeding
+# Sort the main view by ratio
+view.sort_current = main,greater=d.get_ratio=
+view.sort_new = main,less=d.get_ratio=
+view.sort = main
+
+# Sort the seeding view by the upload rate and only show torrents with peers
+view.sort_current = seeding,greater=d.get_up_rate=
+view.filter = seeding,"and=d.get_complete=,d.get_peers_connected="
+view.sort_new = seeding,less=d.get_up_rate=
+view.sort = seeding
+
+# Sort the leeching view by name
+view.sort_current = leeching,greater=d.get_name=
+view.sort_new = leeching,greater=d.get_name=
+view.sort = leeching
+
+# Filter the active view by connected peers
+view.sort_current = active,less=d.get_name=
+view.sort_new = leeching,less=d.get_name=
+view.filter = active,d.get_peers_connected=
+view.sort = active
+
+schedule = sort_main,11,5,view.sort=main
+schedule = sort_seeding,12,5,view.sort=seeding
+schedule = sort_leeching,13,5,view.sort=leeching
+schedule = sort_active,14,5,view.sort=active
 
 # Enable DHT support for trackerless torrents or when all trackers are down.
 # May be set to "disable" (completely disable DHT), "off" (do not start DHT),

diff --git a/.rtorrent.rc b/.rtorrent.rc
@@ -10,12 +10,13 @@ max_peers = 100
 min_peers_seed = 1
 max_peers_seed = 50
 
-# Maximum number of simultanious uploads per torrent.
+# Maximum number of uploads single torrent may use
 max_uploads = 10
 
 # Maximum number of simultaneous downloads
 max_downloads_global = 3
-max_uploads_global = 10
+# Maximum number of simultaneous uploads
+max_uploads_global = 20
 
 # Global upload and download rate in KiB. "0" for unlimited.
 download_rate = 0
@@ -45,14 +46,17 @@ schedule = session_save,240,300,session_save=
 ratio.enable=
 
 # Change the limits, the defaults should be sufficient.
+# Upload to a minimum ratio of 4.0
 ratio.min.set=400
+# Upload to a maximum ratio of 20.0
 ratio.max.set=2000
+# Upload a minimum of 250 MB
 ratio.upload.set=250M
 
 # When seeding ratio is reached close the torrent
 system.method.set = group.seeding.ratio.command, d.close=
 
-# Move files around when download completes
+# Move files to ./unsorted when download completes
 system.method.set_key = event.download.finished,move_complete,"execute=mv,-n,$d.get_base_path=,./unsorted/;d.set_directory=./unsorted/"
 
 # Port range to use for listening.
@@ -70,6 +74,11 @@ port_random = yes
 #
 encryption = allow_incoming,try_outgoing,enable_retry,prefer_plaintext
 
+# Sort the seeding view by the upload rate
+view_sort_current = seeding,greater=d.get_up_rate=
+view_sort_new = seeding,greater=d.get_up_rate=
+schedule = sort,5,2,view_sort=seeding
+
 # Enable DHT support for trackerless torrents or when all trackers are down.
 # May be set to "disable" (completely disable DHT), "off" (do not start DHT),
 # "auto" (start and stop DHT as needed), or "on" (start DHT immediately).

diff --git a/gistfile1.txt b/gistfile1.txt
@@ -0,0 +1,6 @@
+tracker
+|-- leeching
+|-- rtactive
+|-- sorted
+|-- torrents
+|-- unsorted
diff --git a/.rtorrent.rc b/.rtorrent.rc
@@ -0,0 +1,86 @@
+# This is an example resource file for rTorrent. Copy to
+# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
+# uncomment the options you wish to enable.
+
+# Maximum and minimum number of peers to connect to per torrent.
+min_peers = 1
+max_peers = 100
+
+# Same as above but for seeding completed torrents (-1 = same as downloading)
+min_peers_seed = 1
+max_peers_seed = 50
+
+# Maximum number of simultanious uploads per torrent.
+max_uploads = 10
+
+# Maximum number of simultaneous downloads
+max_downloads_global = 3
+max_uploads_global = 10
+
+# Global upload and download rate in KiB. "0" for unlimited.
+download_rate = 0
+upload_rate = 300
+
+# Default directory to save the downloaded torrents.
+directory = ./leeching
+
+# Default session directory. Make sure you don't run multiple instance
+# of rtorrent using the same session directory. Perhaps using a
+# relative path?
+session = ./.rtorrent
+
+# Watch a directory for new torrents, and stop those that have been
+# deleted.
+schedule = watch_directory,5,5,load_start=./rtactive/*.torrent
+schedule = tied_directory,6,5,start_tied=
+schedule = untied_directory,7,5,stop_untied=
+
+# Close torrents when diskspace is low.
+schedule = low_diskspace,5,60,close_low_diskspace=2000M
+
+# Periodically save session data
+schedule = session_save,240,300,session_save=
+
+# Enable the default ratio group.
+ratio.enable=
+
+# Change the limits, the defaults should be sufficient.
+ratio.min.set=400
+ratio.max.set=2000
+ratio.upload.set=250M
+
+# When seeding ratio is reached close the torrent
+system.method.set = group.seeding.ratio.command, d.close=
+
+# Move files around when download completes
+system.method.set_key = event.download.finished,move_complete,"execute=mv,-n,$d.get_base_path=,./unsorted/;d.set_directory=./unsorted/"
+
+# Port range to use for listening.
+port_range = 33101-33199
+
+# Start opening ports at a random position within the port range.
+port_random = yes
+
+# Encryption options, set to none (default) or any combination of the following:
+# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
+#
+# The example value allows incoming encrypted connections, starts unencrypted
+# outgoing connections but retries with encryption if they fail, preferring
+# plaintext to RC4 encryption after the encrypted handshake
+#
+encryption = allow_incoming,try_outgoing,enable_retry,prefer_plaintext
+
+# Enable DHT support for trackerless torrents or when all trackers are down.
+# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
+# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
+# The default is "off". For DHT to work, a session directory must be defined.
+# 
+#dht = auto
+
+# UDP port to use for DHT. 
+# 
+#dht_port = 6881
+
+# Enable peer exchange (for torrents not marked private)
+#
+#peer_exchange = yes
No results found