Unkn0wnCreator

🖥️ See Demo

3.5 fps, Paperwhite 3
@adtac_

step 1: jailbreak your Kindle

mobileread.com is your best resource here, follow the instructions from the LanguageBreak thread

I didn't really follow the LanguageBreak instructions because I didn't care about most of the features + I was curious to do it myself, but the LanguageBreak github repo was invaluable for debugging

Browser Based

Web Wormhole https://webwormhole.io/ https://github.com/saljam/webwormhole
Localsend https://web.localsend.org/
FilePizza https://file.pizza/
~~ShareDrop sharedrop.io https://github.com/szimek/sharedrop~~ (SOLD, not recommended, use one of the forks)
1. ~~A clone SnapDrop snapdrop.net https://github.com/RobinLinus/snapdrop~~ (SOLD, not recommended, use one of the forks)
  1. A fork PairDrop https://pairdrop.net/ https://github.com/schlagmichdoch/pairdrop
ToffeeShare https://toffeeshare.com/
Instant.io https://instant.io/

To pass wireguard's traffic through a TCP tunnel by using udp2raw

Requirements

For Arch linux, install udp2raw by pacman: pacman -S udp2raw

For Debian or Ubuntu, you can use a binary release from: https://github.com/wangyu-/udp2raw/releases

Setup guide link aggregation Unraid with Ubiquiti

Introduction

I am writing this guide becuase I coudn't find a proper one online which contained all the information I was searching for. I will try to guide you through the process of enabling link aggregation (802.3ad) with your Ubiquiti hardware and your Unraid server. Note: not all of Ubiquiti's hardware supports link aggregation (LAG). As of the time of writing Ubiquiti states the following.

Applicable to all UniFi Switch models excluding the USW-Flex and USW-Flex-Mini.

Source: Ubiquiti

	# Send the IP address of your BambuLab printer to port 2021/udp, which BambuStudio is listens on.
	#
	# Ensure your PC has firewall pot 2021/udp open. This is required as the proper response would usually go to the ephemeral source port that the M-SEARCH ssdp:discover message.
	# But we are are blindly sending a response directly to the BambuStudio listening service port (2021/udp).
	#
	# Temporary solution to BambuStudio not allowing you to manually specify the Printer IP.
	#
	# Author(s): gashton <https://github.com/gashton>, Fritz webering <https://github.com/fritzw>
	#
	param (

	# Derived from this: https://github.com/gashton/bambustudio_tools/blob/master/bambudiscovery.sh
	# Python implementation without need for linux
	# Send the IP address of your BambuLab printer to port 2021/udp, which BambuStudio is listens on.

	# Ensure your PC has firewall pot 2021/udp open. This is required as the proper response would usually go to the ephemeral source port that the M-SEARCH ssdp:discover message.
	# But we are are blindly sending a response directly to the BambuStudio listening service port (2021/udp).

	# Temporary solution to BambuStudio not allowing you to manually specify the Printer IP.

	# Usage:

	// ==UserScript==
	// @name Firefox noVNC Paste for Proxmox
	// @namespace http://tampermonkey.net/
	// @version 0.3
	// @description Pastes text into a noVNC window (for use with Proxmox specifically)
	// @author Chester Enright
	// @match https://*
	// @include /^.novnc./
	// @require http://code.jquery.com/jquery-3.3.1.min.js
	// @grant none

	// ==UserScript==
	// @name noVNC Paste for Proxmox
	// @namespace http://tampermonkey.net/
	// @version 0.2a
	// @description Pastes text into a noVNC window (for use with Proxmox specifically)
	// @author Chester Enright
	// @match https://*
	// @include /^.novnc./
	// @require http://code.jquery.com/jquery-3.3.1.min.js
	// @grant none

	async function readRequestBody(request) {
	const { headers } = request;
	const contentType = headers.get('content-type') \|\| '';
	if (contentType.includes('application/json')) {
	return JSON.stringify(await request.json());
	} else if (contentType.includes('form')) {
	const formData = await request.formData();
	const body = {};
	for (const entry of formData.entries()) {
	body[entry[0]] = entry[1];