| ##TCP FLAGS## | |
| Unskilled Attackers Pester Real Security Folks | |
| ============================================== | |
| TCPDUMP FLAGS | |
| Unskilled = URG = (Not Displayed in Flag Field, Displayed elsewhere) | |
| Attackers = ACK = (Not Displayed in Flag Field, Displayed elsewhere) | |
| Pester = PSH = [P] (Push Data) | |
| Real = RST = [R] (Reset Connection) | |
| Security = SYN = [S] (Start Connection) |
Tcpdump is a commandline tool that is used to dump traffic on a network. This tool comes in hand when you want to analyse network captures within the command line. Basically it can do most of the wireshark job.
NOTE This guide might not be complete it just serve as a reference to me.
| ---------------------------------------------------------------------------------------------------- | |
| (netcat or nc or ncat) | |
| #Use Netcat as a Simple Web Server | |
| vi index.html #make a simple HTML file | |
| printf 'HTTP/1.1 200 OK\n\n%s' "$(cat index.html)" | netcat -l 8888 # | |
| http://server_IP:8888 #access the content,serve the page, and then the netcat connection will close | |
| "while true; do printf 'HTTP/1.1 200 OK\n\n%s' "$(cat index.html)" | netcat -l 8888; done" #have netcat serve the page indefinitely by wrapping the last command in an infinite loop | |
| netcat -z -v domain.com 1-1000 #scan all ports up to 1000 |