Skip to content

Instantly share code, notes, and snippets.

@bgromov

bgromov/ANSI.md

Forked from fnky/ANSI.md
Created September 26, 2022 12:24
Show Gist options
  • Save bgromov/3f3d2f80290136eda85cfb68c620754c to your computer and use it in GitHub Desktop.
Save bgromov/3f3d2f80290136eda85cfb68c620754c to your computer and use it in GitHub Desktop.
Download ZIP

Revisions

  1. @fnky fnky revised this gist Nov 2, 2021. No changes.
  2. @fnky fnky revised this gist Nov 2, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -5,7 +5,7 @@ Standard escape codes are prefixed with `Escape`:
    - Ctrl-Key: `^[`
    - Octal: `\033`
    - Unicode: `\u001b`
    - Hexadecimal: `\x1b`
    - Hexadecimal: `\x1B`
    - Decimal: `27`

    Followed by the command, somtimes delimited by opening square bracket (`[`), known as a Control Sequence Introducer (CSI), optionally followed by arguments and the command itself.
  3. @fnky fnky revised this gist Nov 2, 2021. 1 changed file with 13 additions and 2 deletions.
    15 changes: 13 additions & 2 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -18,6 +18,15 @@ For example:
    \x1b[1;31m # Set style to bold, red foreground.
    ```
    ## Sequences
    - `ESC` - sequence starting with `ESC` (`\x1B`)
    - `CSI` - Control Sequence Introducer: sequence starting with `ESC [` or CSI (`\x9B`)
    - `DCS` - Device Control String: sequence starting with `ESC P` or DCS (`\x90`)
    - `OSC` - Operating System Command: sequence starting with `ESC ]` or OSC (`\x9D`)
    Any whitespaces between sequences and arguments should be ignored. They are present for improved readability.
    ## General ASCII Codes
    | Name | decimal | octal | hex | C-escape | Ctrl-Key | Description |
    @@ -54,8 +63,9 @@ For example:
    | `ESC[#F` | moves cursor to beginning of previous line, # lines up |
    | `ESC[#G` | moves cursor to column # |
    | `ESC[6n` | request cursor position (reports as `ESC[#;#R`) |
    | `ESC7` | save cursor position (DEC) |
    | `ESC8` | restores the cursor to the last saved position (DEC) |
    | `ESC M` | moves cursor one line up, scrolling if needed |
    | `ESC 7` | save cursor position (DEC) |
    | `ESC 8` | restores the cursor to the last saved position (DEC) |
    | `ESC[s` | save cursor position (SCO) |
    | `ESC[u` | restores the cursor to the last saved position (SCO) |
    @@ -335,3 +345,4 @@ The parameters for this escape sequence are defined as follows:
    - [bash-hackers: Terminal Codes (ANSI/VT100) introduction](http://wiki.bash-hackers.org/scripting/terminalcodes)
    - [XTerm Control Sequences](https://invisible-island.net/xterm/ctlseqs/ctlseqs.html)
    - [VT100 – Various terminal manuals](https://vt100.net/)
    - [xterm.js – Supported Terminal Sequences](https://xtermjs.org/docs/api/vtfeatures/)
  4. @fnky fnky revised this gist Nov 2, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -73,7 +73,7 @@ For example:
    | `ESC[K` | erase in line (same as ESC\[0K) |
    | `ESC[0K` | erase from cursor to end of line |
    | `ESC[1K` | erase start of line to the cursor |
    | `ESC[2K` | erase the entire line |
    | `ESC[2K` | erase the entire line |
    > Note: Erasing the line won't move the cursor, meaning that the cursor will stay at the last position it was at before the line was erased. You can use `\r` after erasing the line, to return the cursor to the start of the current line.
  5. @fnky fnky revised this gist Nov 2, 2021. 1 changed file with 3 additions and 3 deletions.
    6 changes: 3 additions & 3 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -71,9 +71,9 @@ For example:
    | `ESC[2J` | erase entire screen |
    | `ESC[3J` | erase saved lines |
    | `ESC[K` | erase in line (same as ESC\[0K) |
    | `ESC[0K` | erases from cursor to end of line |
    | `ESC[1K` | erases start of line to the cursor |
    | `ESC[2K` | erases the entire line |
    | `ESC[0K` | erase from cursor to end of line |
    | `ESC[1K` | erase start of line to the cursor |
    | `ESC[2K` | erase the entire line |
    > Note: Erasing the line won't move the cursor, meaning that the cursor will stay at the last position it was at before the line was erased. You can use `\r` after erasing the line, to return the cursor to the start of the current line.
  6. @fnky fnky revised this gist Nov 2, 2021. 1 changed file with 11 additions and 8 deletions.
    19 changes: 11 additions & 8 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -65,14 +65,17 @@ For example:
    | ESC Code Sequence | Description |
    | :---------------- | :---------------------------------------- |
    | `ESC[J` | clears the screen |
    | `ESC[0J` | clears from cursor until end of screen |
    | `ESC[1J` | clears from cursor to beginning of screen |
    | `ESC[2J` | clears entire screen |
    | `ESC[K` | clears the current line |
    | `ESC[0K` | clears from cursor to end of line |
    | `ESC[1K` | clears from cursor to start of line |
    | `ESC[2K` | clears entire line |
    | `ESC[J` | erase in display (same as ESC\[0J) |
    | `ESC[0J` | erase from cursor until end of screen |
    | `ESC[1J` | erase from cursor to beginning of screen |
    | `ESC[2J` | erase entire screen |
    | `ESC[3J` | erase saved lines |
    | `ESC[K` | erase in line (same as ESC\[0K) |
    | `ESC[0K` | erases from cursor to end of line |
    | `ESC[1K` | erases start of line to the cursor |
    | `ESC[2K` | erases the entire line |
    > Note: Erasing the line won't move the cursor, meaning that the cursor will stay at the last position it was at before the line was erased. You can use `\r` after erasing the line, to return the cursor to the start of the current line.
    ## Colors / Graphics Mode
  7. @fnky fnky revised this gist Sep 6, 2021. 1 changed file with 4 additions and 2 deletions.
    6 changes: 4 additions & 2 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -79,8 +79,8 @@ For example:
    | ESC Code Sequence | Reset Sequence | Description |
    | :---------------- | :------------- | :--------------------------------------------------------- |
    | `ESC[1;34;{...}m` | | Set graphics modes for cell, separated by semicolon (`;`). |
    | `ESC[0m` | `ESC[0m` | reset all modes (styles and colors) |
    | `ESC[1m` | `ESC[21m` | set bold mode. |
    | `ESC[0m` | | reset all modes (styles and colors) |
    | `ESC[1m` | `ESC[22m` | set bold mode. |
    | `ESC[2m` | `ESC[22m` | set dim/faint mode. |
    | `ESC[3m` | `ESC[23m` | set italic mode. |
    | `ESC[4m` | `ESC[24m` | set underline mode. |
    @@ -91,6 +91,8 @@ For example:
    > **Note:** Some terminals may not support some of the graphic mode sequences listed above.
    > **Note:** Both dim and bold modes are reset with the `ESC[22m` sequence. The `ESC[21m` sequence is a non-specified sequence for double underline mode and only work in some terminals and is reset with `ESC[24m`.
    ### Color codes
    Most terminals support 8 and 16 colors, as well as 256 (8-bit) colors. These colors are set by the user, but have commonly defined meanings.
  8. @fnky fnky revised this gist Sep 6, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -80,7 +80,7 @@ For example:
    | :---------------- | :------------- | :--------------------------------------------------------- |
    | `ESC[1;34;{...}m` | | Set graphics modes for cell, separated by semicolon (`;`). |
    | `ESC[0m` | `ESC[0m` | reset all modes (styles and colors) |
    | `ESC[1m` | `ESC[22m` | set bold mode. |
    | `ESC[1m` | `ESC[21m` | set bold mode. |
    | `ESC[2m` | `ESC[22m` | set dim/faint mode. |
    | `ESC[3m` | `ESC[23m` | set italic mode. |
    | `ESC[4m` | `ESC[24m` | set underline mode. |
  9. @fnky fnky revised this gist Aug 30, 2021. 1 changed file with 27 additions and 13 deletions.
    40 changes: 27 additions & 13 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -76,18 +76,18 @@ For example:
    ## Colors / Graphics Mode
    | ESC Code Sequence | Description |
    | :---------------- | :----------------------------------------------------------------------- |
    | `ESC[1;34;{...}m` | Set graphics modes for cell, separated by semicolon (`;`). |
    | `ESC[0m` | reset all modes (styles and colors) |
    | `ESC[1m` | set bold mode. |
    | `ESC[2m` | set dim/faint mode. |
    | `ESC[3m` | set italic mode. |
    | `ESC[4m` | set underline mode. |
    | `ESC[5m` | set blinking mode |
    | `ESC[7m` | set inverse/reverse mode |
    | `ESC[8m` | set invisible mode |
    | `ESC[9m` | set strikethrough mode. |
    | ESC Code Sequence | Reset Sequence | Description |
    | :---------------- | :------------- | :--------------------------------------------------------- |
    | `ESC[1;34;{...}m` | | Set graphics modes for cell, separated by semicolon (`;`). |
    | `ESC[0m` | `ESC[0m` | reset all modes (styles and colors) |
    | `ESC[1m` | `ESC[22m` | set bold mode. |
    | `ESC[2m` | `ESC[22m` | set dim/faint mode. |
    | `ESC[3m` | `ESC[23m` | set italic mode. |
    | `ESC[4m` | `ESC[24m` | set underline mode. |
    | `ESC[5m` | `ESC[25m` | set blinking mode |
    | `ESC[7m` | `ESC[27m` | set inverse/reverse mode |
    | `ESC[8m` | `ESC[28m` | set hidden/invisible mode |
    | `ESC[9m` | `ESC[29m` | set strikethrough mode. |
    > **Note:** Some terminals may not support some of the graphic mode sequences listed above.
    @@ -107,9 +107,10 @@ Most terminals support 8 and 16 colors, as well as 256 (8-bit) colors. These col
    | Magenta | `35` | `45` |
    | Cyan | `36` | `46` |
    | White | `37` | `47` |
    | Default | `39` | `49` |
    | Reset | `0` | `0` |
    > **Note:** the _Reset_ color is the reset code that resets _all_ colors and text effects.
    > **Note:** the _Reset_ color is the reset code that resets _all_ colors and text effects, Use _Default_ color to reset colors only.
    Most terminals, apart from the basic set of 8 colors, also support the "bright" or "bold" colors. These have their own set of codes, mirroring the normal colors, but with an additional `;1` in their codes:
    @@ -120,6 +121,19 @@ Most terminals, apart from the basic set of 8 colors, also support the "bright"
    \x1b[2;37;41mWorld
    ```
    Terminals that support the [aixterm specification](https://sites.ualberta.ca/dept/chemeng/AIX-43/share/man/info/C/a_doc_lib/cmds/aixcmds1/aixterm.htm) provides bright versions of the ISO colors, without the need to use the bold modifier:
    | Color Name | Foreground Color Code | Background Color Code |
    | :------------- | :-------------------- | :-------------------- |
    | Bright Black | `90` | `100` |
    | Bright Red | `91` | `101` |
    | Bright Green | `92` | `102` |
    | Bright Yellow | `93` | `103` |
    | Bright Blue | `94` | `104` |
    | Bright Magenta | `95` | `105` |
    | Bright Cyan | `96` | `106` |
    | Bright White | `97` | `107` |
    #### 256 Colors
    The following escape codes tells the terminal to use the given color ID:
  10. @fnky fnky revised this gist Aug 12, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -51,7 +51,7 @@ For example:
    | `ESC[#C` | moves cursor right # columns |
    | `ESC[#D` | moves cursor left # columns |
    | `ESC[#E` | moves cursor to beginning of next line, # lines down |
    | `ESC[#F` | moves cursor to beginning of previous line, # lines down |
    | `ESC[#F` | moves cursor to beginning of previous line, # lines up |
    | `ESC[#G` | moves cursor to column # |
    | `ESC[6n` | request cursor position (reports as `ESC[#;#R`) |
    | `ESC7` | save cursor position (DEC) |
  11. @fnky fnky revised this gist Aug 12, 2021. 1 changed file with 1 addition and 0 deletions.
    1 change: 1 addition & 0 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -315,3 +315,4 @@ The parameters for this escape sequence are defined as follows:
    - [bluesock: ansi codes](https://bluesock.org/~willkg/dev/ansi.html)
    - [bash-hackers: Terminal Codes (ANSI/VT100) introduction](http://wiki.bash-hackers.org/scripting/terminalcodes)
    - [XTerm Control Sequences](https://invisible-island.net/xterm/ctlseqs/ctlseqs.html)
    - [VT100 – Various terminal manuals](https://vt100.net/)
  12. @fnky fnky revised this gist Jul 29, 2021. 1 changed file with 7 additions and 3 deletions.
    10 changes: 7 additions & 3 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -8,7 +8,7 @@ Standard escape codes are prefixed with `Escape`:
    - Hexadecimal: `\x1b`
    - Decimal: `27`

    Followed by the command, usually delimited by opening square bracket (`[`) and optionally followed by arguments and the command itself.
    Followed by the command, somtimes delimited by opening square bracket (`[`), known as a Control Sequence Introducer (CSI), optionally followed by arguments and the command itself.

    Arguments are delimeted by semi colon (`;`).

    @@ -54,8 +54,12 @@ For example:
    | `ESC[#F` | moves cursor to beginning of previous line, # lines down |
    | `ESC[#G` | moves cursor to column # |
    | `ESC[6n` | request cursor position (reports as `ESC[#;#R`) |
    | `ESC[s` | save cursor position |
    | `ESC[u` | restores the cursor to the last saved position |
    | `ESC7` | save cursor position (DEC) |
    | `ESC8` | restores the cursor to the last saved position (DEC) |
    | `ESC[s` | save cursor position (SCO) |
    | `ESC[u` | restores the cursor to the last saved position (SCO) |
    > **Note:** Some sequences, like saving and restoring cursors, are private sequences and are not standardized. While some terminal emulators (i.e. xterm and derived) support both SCO and DEC sequences, they are likely to have different functionality. It is therefore recommended to use DEC sequences.
    ## Erase Functions
  13. @fnky fnky revised this gist May 29, 2021. 1 changed file with 13 additions and 13 deletions.
    26 changes: 13 additions & 13 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -72,18 +72,18 @@ For example:
    ## Colors / Graphics Mode
    | ESC Code Sequence | Description |
    | :---------------- | :----------------------------------------- |
    | `ESC[{...}m` | Set graphics mode for cell and onward. |
    | `ESC[0m` | reset all modes (styles and colors |
    | `ESC[1m` | set bold mode. |
    | `ESC[2m` | set dim/faint mode. |
    | `ESC[3m` | set italic mode. |
    | `ESC[4m` | set underline mode. |
    | `ESC[5m` | set blinking mode |
    | `ESC[7m` | set inverse/reverse mode |
    | `ESC[8m` | set invisible mode |
    | `ESC[9m` | set strikethrough mode. |
    | ESC Code Sequence | Description |
    | :---------------- | :----------------------------------------------------------------------- |
    | `ESC[1;34;{...}m` | Set graphics modes for cell, separated by semicolon (`;`). |
    | `ESC[0m` | reset all modes (styles and colors) |
    | `ESC[1m` | set bold mode. |
    | `ESC[2m` | set dim/faint mode. |
    | `ESC[3m` | set italic mode. |
    | `ESC[4m` | set underline mode. |
    | `ESC[5m` | set blinking mode |
    | `ESC[7m` | set inverse/reverse mode |
    | `ESC[8m` | set invisible mode |
    | `ESC[9m` | set strikethrough mode. |
    > **Note:** Some terminals may not support some of the graphic mode sequences listed above.
    @@ -125,7 +125,7 @@ The following escape codes tells the terminal to use the given color ID:
    | `ESC[38;5;{ID}m` | Set foreground color. |
    | `ESC[48;5;{ID}m` | Set background color. |
    Where the `{ID}` placeholder should be replaced with the color index from 0 to 255 of the following color table:
    Where `{ID}` should be replaced with the color index from 0 to 255 of the following color table:
    ![256 Color table](https://user-images.githubusercontent.com/995050/47952855-ecb12480-df75-11e8-89d4-ac26c50e80b9.png)
  14. @fnky fnky revised this gist May 29, 2021. 1 changed file with 4 additions and 8 deletions.
    12 changes: 4 additions & 8 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -118,18 +118,14 @@ Most terminals, apart from the basic set of 8 colors, also support the "bright"
    #### 256 Colors
    The following escape code tells the terminal to use the given color ID:
    ```
    ESC[38;5;${ID}m
    ```
    The following escape codes tells the terminal to use the given color ID:
    | ESC Code Sequence | Description |
    | :---------------- | :-------------------- |
    | `ESC[38;5;${ID}m` | Set foreground color. |
    | `ESC[48;5;${ID}m` | Set background color. |
    | `ESC[38;5;{ID}m` | Set foreground color. |
    | `ESC[48;5;{ID}m` | Set background color. |
    Where **ID** is the color index from 0 to 255 of the color table:
    Where the `{ID}` placeholder should be replaced with the color index from 0 to 255 of the following color table:
    ![256 Color table](https://user-images.githubusercontent.com/995050/47952855-ecb12480-df75-11e8-89d4-ac26c50e80b9.png)
  15. @fnky fnky revised this gist May 5, 2021. 1 changed file with 2 additions and 2 deletions.
    4 changes: 2 additions & 2 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -53,8 +53,8 @@ For example:
    | `ESC[#E` | moves cursor to beginning of next line, # lines down |
    | `ESC[#F` | moves cursor to beginning of previous line, # lines down |
    | `ESC[#G` | moves cursor to column # |
    | `ESC[#;#R` | reports current cursor line and column |
    | `ESC[s` | saves the current cursor position |
    | `ESC[6n` | request cursor position (reports as `ESC[#;#R`) |
    | `ESC[s` | save cursor position |
    | `ESC[u` | restores the cursor to the last saved position |
    ## Erase Functions
  16. @fnky fnky revised this gist Apr 30, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -29,7 +29,7 @@ For example:
    | `VT` | 11 | 013 | 0x0B | `\v` | `^K` | Vertical TAB |
    | `FF` | 12 | 014 | 0x0C | `\f` | `^L` | Formfeed (also: New page `NP`) |
    | `CR` | 13 | 015 | 0x0D | `\r` | `^M` | Carriage return |
    | `ESC` | 27 | 033 | 0x1B | `\e`[*](#escape) | `^[` | Escape character |
    | `ESC` | 27 | 033 | 0x1B | `\e`[*](#escape) | `^[` | Escape character |
    | `DEL` | 127 | 177 | 0x7F | `<none>` | `<none>` | Delete character |
    <div id="escape"></div>
  17. @fnky fnky revised this gist Apr 29, 2021. 1 changed file with 16 additions and 7 deletions.
    23 changes: 16 additions & 7 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -178,14 +178,22 @@ These escape sequences are usually not well documented.
    | `ESC[=19h` | 320 x 200 color (256-color graphics) |
    | `ESC[={value}l` | Resets the mode by using the same values that Set Mode uses, except for 7, which disables line wrapping. The last character in this escape sequence is a lowercase L. |
    ### Example Modes
    ### Common Private Modes
    | ESC Code Sequence | Description |
    | :---------------- | :-------------------- |
    | `ESC[?25l` | make cursor invisible |
    | `ESC[?25h` | make cursor visible |
    | `ESC[?47l` | restore screen |
    | `ESC[?47h` | save screen |
    These are some examples of private modes, which are not defined by the specification, but are implemented in most terminals.
    | ESC Code Sequence | Description |
    | :---------------- | :------------------------------ |
    | `ESC[?25l` | make cursor invisible |
    | `ESC[?25h` | make cursor visible |
    | `ESC[?47l` | restore screen |
    | `ESC[?47h` | save screen |
    | `ESC[?1049h` | enables the alternative buffer |
    | `ESC[?1049l` | disables the alternative buffer |
    Refer to the [XTerm Control Sequences](https://invisible-island.net/xterm/ctlseqs/ctlseqs.html) for a more in-depth list of private modes defined by XTerm.
    > Note: While these modes may be supported by the most terminals, some may not work in multiplexers like tmux.
    ### Keyboard Strings
    @@ -306,3 +314,4 @@ The parameters for this escape sequence are defined as follows:
    - [ascii-table: ANSI Escape sequences](http://ascii-table.com/ansi-escape-sequences.php)
    - [bluesock: ansi codes](https://bluesock.org/~willkg/dev/ansi.html)
    - [bash-hackers: Terminal Codes (ANSI/VT100) introduction](http://wiki.bash-hackers.org/scripting/terminalcodes)
    - [XTerm Control Sequences](https://invisible-island.net/xterm/ctlseqs/ctlseqs.html)
  18. @fnky fnky revised this gist Feb 28, 2021. 1 changed file with 12 additions and 5 deletions.
    17 changes: 12 additions & 5 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -74,11 +74,18 @@ For example:
    | ESC Code Sequence | Description |
    | :---------------- | :----------------------------------------- |
    | `ESC[{...}m` | Set styles and colors for cell and onward. |
    | `ESC[0m` | reset all styles and colors |
    | `ESC[1m` | set style to bold |
    | `ESC[2m` | set style to dim |
    | `ESC[2m` | set style to dim |
    | `ESC[{...}m` | Set graphics mode for cell and onward. |
    | `ESC[0m` | reset all modes (styles and colors |
    | `ESC[1m` | set bold mode. |
    | `ESC[2m` | set dim/faint mode. |
    | `ESC[3m` | set italic mode. |
    | `ESC[4m` | set underline mode. |
    | `ESC[5m` | set blinking mode |
    | `ESC[7m` | set inverse/reverse mode |
    | `ESC[8m` | set invisible mode |
    | `ESC[9m` | set strikethrough mode. |
    > **Note:** Some terminals may not support some of the graphic mode sequences listed above.
    ### Color codes
  19. @fnky fnky revised this gist Feb 25, 2021. 1 changed file with 7 additions and 1 deletion.
    8 changes: 7 additions & 1 deletion ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -29,9 +29,15 @@ For example:
    | `VT` | 11 | 013 | 0x0B | `\v` | `^K` | Vertical TAB |
    | `FF` | 12 | 014 | 0x0C | `\f` | `^L` | Formfeed (also: New page `NP`) |
    | `CR` | 13 | 015 | 0x0D | `\r` | `^M` | Carriage return |
    | `ESC` | 27 | 033 | 0x1B | `\e` | `^[` | Escape character |
    | `ESC` | 27 | 033 | 0x1B | `\e`[*](#escape) | `^[` | Escape character |
    | `DEL` | 127 | 177 | 0x7F | `<none>` | `<none>` | Delete character |
    <div id="escape"></div>
    > **Note:** Some control escape sequences, like `\e` for `ESC`, are not guaranteed to work in all languages and compilers. It is recommended to use the decimal, octal or hex representation as escape code.
    > **Note:** The **Ctrl-Key** representation is simply associating the non-printable characters from ASCII code 1 with the printable (letter) characters from ASCII code 65 ("A"). ASCII code 1 would be `^A` (Ctrl-A), while ASCII code 7 (BEL) would be `^G` (Ctrl-G). This is a common representation (and input method) and historically comes from one of the VT series of terminals.
    ## Cursor Controls
  20. @fnky fnky revised this gist Feb 25, 2021. 1 changed file with 86 additions and 84 deletions.
    170 changes: 86 additions & 84 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -29,50 +29,50 @@ For example:
    | `VT` | 11 | 013 | 0x0B | `\v` | `^K` | Vertical TAB |
    | `FF` | 12 | 014 | 0x0C | `\f` | `^L` | Formfeed (also: New page `NP`) |
    | `CR` | 13 | 015 | 0x0D | `\r` | `^M` | Carriage return |
    | `ESC` | 27 | 033 | 0x1B | `<none>` | `^[` | Escape character |
    | `ESC` | 27 | 033 | 0x1B | `\e` | `^[` | Escape character |
    | `DEL` | 127 | 177 | 0x7F | `<none>` | `<none>` | Delete character |
    > Note: The **Ctrl-Key** representation is simply associating the non-printable characters from ASCII code 1 with the printable (letter) characters from ASCII code 65 ("A"). ASCII code 1 would be `^A` (Ctrl-A), while ASCII code 7 (BEL) would be `^G` (Ctrl-G). This is a common representation (and input method) and historically comes from one of the VT series of terminals.
    > **Note:** The **Ctrl-Key** representation is simply associating the non-printable characters from ASCII code 1 with the printable (letter) characters from ASCII code 65 ("A"). ASCII code 1 would be `^A` (Ctrl-A), while ASCII code 7 (BEL) would be `^G` (Ctrl-G). This is a common representation (and input method) and historically comes from one of the VT series of terminals.
    ## Cursor Controls
    | ESC Code Sequence | Description |
    |:------------------|:------------|
    | `ESC[H` | moves cursor to home position (0, 0) |
    | `ESC[{line};{column}H` <br> `ESC[{line};{column}f` | moves cursor to line #, column # |
    | `ESC[#A` | moves cursor up # lines |
    | `ESC[#B` | moves cursor down # lines |
    | `ESC[#C` | moves cursor right # columns |
    | `ESC[#D` | moves cursor left # columns |
    | `ESC[#E` | moves cursor to beginning of next line, # lines down |
    | `ESC[#F` | moves cursor to beginning of previous line, # lines down |
    | `ESC[#G` | moves cursor to column # |
    | `ESC[#;#R` | reports current cursor line and column |
    | `ESC[s` | saves the current cursor position |
    | `ESC[u` | restores the cursor to the last saved position |
    | ESC Code Sequence | Description |
    | :------------------------------------------------- | :------------------------------------------------------- |
    | `ESC[H` | moves cursor to home position (0, 0) |
    | `ESC[{line};{column}H` <br> `ESC[{line};{column}f` | moves cursor to line #, column # |
    | `ESC[#A` | moves cursor up # lines |
    | `ESC[#B` | moves cursor down # lines |
    | `ESC[#C` | moves cursor right # columns |
    | `ESC[#D` | moves cursor left # columns |
    | `ESC[#E` | moves cursor to beginning of next line, # lines down |
    | `ESC[#F` | moves cursor to beginning of previous line, # lines down |
    | `ESC[#G` | moves cursor to column # |
    | `ESC[#;#R` | reports current cursor line and column |
    | `ESC[s` | saves the current cursor position |
    | `ESC[u` | restores the cursor to the last saved position |
    ## Erase Functions
    | ESC Code Sequence | Description |
    |:------------------|:------------|
    | `ESC[J` | clears the screen |
    | `ESC[0J` | clears from cursor until end of screen |
    | `ESC[1J` | clears from cursor to beginning of screen |
    | `ESC[2J` | clears entire screen |
    | `ESC[K` | clears the current line |
    | `ESC[0K` | clears from cursor to end of line |
    | `ESC[1K` | clears from cursor to start of line |
    | `ESC[2K` | clears entire line |
    | ESC Code Sequence | Description |
    | :---------------- | :---------------------------------------- |
    | `ESC[J` | clears the screen |
    | `ESC[0J` | clears from cursor until end of screen |
    | `ESC[1J` | clears from cursor to beginning of screen |
    | `ESC[2J` | clears entire screen |
    | `ESC[K` | clears the current line |
    | `ESC[0K` | clears from cursor to end of line |
    | `ESC[1K` | clears from cursor to start of line |
    | `ESC[2K` | clears entire line |
    ## Colors / Graphics Mode
    | ESC Code Sequence | Description |
    |:------------------|:------------|
    | `ESC[{...}m` | Set styles and colors for cell and onward. |
    | `ESC[0m` | reset all styles and colors |
    | `ESC[1m` | set style to bold |
    | `ESC[2m` | set style to dim |
    | `ESC[2m` | set style to dim |
    | ESC Code Sequence | Description |
    | :---------------- | :----------------------------------------- |
    | `ESC[{...}m` | Set styles and colors for cell and onward. |
    | `ESC[0m` | reset all styles and colors |
    | `ESC[1m` | set style to bold |
    | `ESC[2m` | set style to dim |
    | `ESC[2m` | set style to dim |
    ### Color codes
    @@ -81,18 +81,18 @@ Most terminals support 8 and 16 colors, as well as 256 (8-bit) colors. These col
    #### 8-16 Colors
    | Color Name | Foreground Color Code | Background Color Code |
    |:------------------|:------------|:------------|
    | Black | `30` | `40` |
    | Red | `31` | `41` |
    | Green | `32` | `42` |
    | Yellow | `33` | `43` |
    | Blue | `34` | `44` |
    | Magenta | `35` | `45` |
    | Cyan | `36` | `46` |
    | White | `37` | `47` |
    | Reset | `0` | `0` |
    > Note: The **Reset** is the reset code that resets _all_ colors and text effects.
    | :--------- | :-------------------- | :-------------------- |
    | Black | `30` | `40` |
    | Red | `31` | `41` |
    | Green | `32` | `42` |
    | Yellow | `33` | `43` |
    | Blue | `34` | `44` |
    | Magenta | `35` | `45` |
    | Cyan | `36` | `46` |
    | White | `37` | `47` |
    | Reset | `0` | `0` |
    > **Note:** the _Reset_ color is the reset code that resets _all_ colors and text effects.
    Most terminals, apart from the basic set of 8 colors, also support the "bright" or "bold" colors. These have their own set of codes, mirroring the normal colors, but with an additional `;1` in their codes:
    @@ -111,8 +111,8 @@ The following escape code tells the terminal to use the given color ID:
    ESC[38;5;${ID}m
    ```
    | ESC Code Sequence | Description |
    |:------------------|:------------|
    | ESC Code Sequence | Description |
    | :---------------- | :-------------------- |
    | `ESC[38;5;${ID}m` | Set foreground color. |
    | `ESC[48;5;${ID}m` | Set background color. |
    @@ -124,18 +124,18 @@ The table starts with the original 16 colors (0-15).
    The proceeding 216 colors (16-231) or formed by a 3bpc RGB value offset by 16, packed into a single value.
    The final 24 colors (232-256) are grayscale starting from a shade slighly lighter than black, ranging up to shade slightly darker than white.
    The final 24 colors (232-255) are grayscale starting from a shade slighly lighter than black, ranging up to shade slightly darker than white.
    Some emulators interpret these steps as linear increments from (`256 / 24`) on all three channels, although some emulators may explicitly define these values.
    Some emulators interpret these steps as linear increments (`256 / 24`) on all three channels, although some emulators may explicitly define these values.
    #### RGB Colors
    More modern terminals supports [Truecolor](https://en.wikipedia.org/wiki/Color_depth#True_color_.2824-bit.29) (24-bit RGB), which allows you to set foreground and background colors using RGB.
    These escape sequences are usually not well documented.
    | ESC Code Sequence | Description |
    |:------------------|:------------|
    | ESC Code Sequence | Description |
    | :---------------------- | :--------------------------- |
    | `ESC[38;2;{r};{g};{b}m` | Set foreground color as RGB. |
    | `ESC[48;2;{r};{g};{b}m` | Set background color as RGB. |
    @@ -145,33 +145,34 @@ These escape sequences are usually not well documented.
    ### Set Mode
    | ESC Code Sequence | Description |
    |:------------------|:------------|
    | `ESC[={value}h` | Changes the screen width or type to the mode specified by value. |
    | `ESC[=0h` | 40 x 25 monochrome (text) |
    | `ESC[=1h` | 40 x 25 color (text) |
    | `ESC[=2h` | 80 x 25 monochrome (text) |
    | `ESC[=3h` | 80 x 25 color (text) |
    | `ESC[=4h` | 320 x 200 4-color (graphics) |
    | `ESC[=5h` | 320 x 200 monochrome (graphics) |
    | `ESC[=6h` | 640 x 200 monochrome (graphics) |
    | `ESC[=7h` | Enables line wrapping |
    | `ESC[=13h` | 320 x 200 color (graphics) |
    | `ESC[=14h` | 640 x 200 color (16-color graphics) |
    | `ESC[=15h` | 640 x 350 monochrome (2-color graphics) |
    | `ESC[=16h` | 640 x 350 color (16-color graphics) |
    | `ESC[=17h` | 640 x 480 monochrome (2-color graphics) |
    | `ESC[=18h` | 640 x 480 color (16-color graphics) |
    | `ESC[=19h` | 320 x 200 color (256-color graphics) |
    | `ESC[={value}l` | Resets the mode by using the same values that Set Mode uses, except for 7, which disables line wrapping. The last character in this escape sequence is a lowercase L. |
    | ESC Code Sequence | Description |
    | :---------------- | :-------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
    | `ESC[={value}h` | Changes the screen width or type to the mode specified by value. |
    | `ESC[=0h` | 40 x 25 monochrome (text) |
    | `ESC[=1h` | 40 x 25 color (text) |
    | `ESC[=2h` | 80 x 25 monochrome (text) |
    | `ESC[=3h` | 80 x 25 color (text) |
    | `ESC[=4h` | 320 x 200 4-color (graphics) |
    | `ESC[=5h` | 320 x 200 monochrome (graphics) |
    | `ESC[=6h` | 640 x 200 monochrome (graphics) |
    | `ESC[=7h` | Enables line wrapping |
    | `ESC[=13h` | 320 x 200 color (graphics) |
    | `ESC[=14h` | 640 x 200 color (16-color graphics) |
    | `ESC[=15h` | 640 x 350 monochrome (2-color graphics) |
    | `ESC[=16h` | 640 x 350 color (16-color graphics) |
    | `ESC[=17h` | 640 x 480 monochrome (2-color graphics) |
    | `ESC[=18h` | 640 x 480 color (16-color graphics) |
    | `ESC[=19h` | 320 x 200 color (256-color graphics) |
    | `ESC[={value}l` | Resets the mode by using the same values that Set Mode uses, except for 7, which disables line wrapping. The last character in this escape sequence is a lowercase L. |
    ### Example Modes
    | ESC Code Sequence | Description |
    | `ESC[?25l` | make cursor invisible |
    | `ESC[?25h` | make cursor visible |
    | `ESC[?47l` | restore screen |
    | `ESC[?47h` | save screen |
    | ESC Code Sequence | Description |
    | :---------------- | :-------------------- |
    | `ESC[?25l` | make cursor invisible |
    | `ESC[?25h` | make cursor visible |
    | `ESC[?47l` | restore screen |
    | `ESC[?47h` | save screen |
    ### Keyboard Strings
    @@ -180,14 +181,16 @@ ESC[{code};{string};{...}p
    ```
    Redefines a keyboard key to a specified string.
    The parameters for this escape sequence are defined as follows:
    Code is one or more of the values listed in the following table. These values represent keyboard keys and key combinations. When using these values in a command, you must type the semicolons shown in this table in addition to the semicolons required by the escape sequence. The codes in parentheses are not available on some keyboards. ANSI.SYS will not interpret the codes in parentheses for those keyboards unless you specify the /X switch in the DEVICE command for ANSI.SYS.
    String is either the ASCII code for a single character or a string contained in quotation marks. For example, both 65 and "A" can be used to represent an uppercase A.
    IMPORTANT: Some of the values in the following table are not valid for all computers. Check your computer's documentation for values that are different.
    - `code` is one or more of the values listed in the following table. These values represent keyboard keys and key combinations. When using these values in a command, you must type the semicolons shown in this table in addition to the semicolons required by the escape sequence. The codes in parentheses are not available on some keyboards. `ANSI.SYS` will not interpret the codes in parentheses for those keyboards unless you specify the `/X` switch in the `DEVICE` command for `ANSI.SYS`.
    - `string` is either the ASCII code for a single character or a string contained in quotation marks. For example, both 65 and "A" can be used to represent an uppercase A.
    > **IMPORTANT:** Some of the values in the following table are not valid for all computers. Check your computer's documentation for values that are different.
    #### List of keyboard strings
    | Key | Code | SHIFT+code | CTRL+code | ALT+code |
    | ------------------------ | -------- | ---------- | --------- | --------- |
    @@ -283,11 +286,10 @@ IMPORTANT: Some of the values in the following table are not valid for all compu
    | \+ (keypad) | 43 | 43 | (0;150) | (0;55) |
    | 5 (keypad) | (0;76) | 53 | (0;143) | \-- |
    ## Resources
    - [Wikipedia: ANSI escape code](https://en.wikipedia.org/wiki/ANSI_escape_code)
    - [Build your own Command Line with ANSI escape codes](http://www.lihaoyi.com/post/BuildyourownCommandLinewithANSIescapecodes.html)
    - [ascii-table: ANSI Escape sequences](http://ascii-table.com/ansi-escape-sequences.php)
    - [bluesock: ansi codes](https://bluesock.org/~willkg/dev/ansi.html)
    - [bash-hackers: Terminal Codes (ANSI/VT100) introduction](http://wiki.bash-hackers.org/scripting/terminalcodes)
    - [bash-hackers: Terminal Codes (ANSI/VT100) introduction](http://wiki.bash-hackers.org/scripting/terminalcodes)
  21. @fnky fnky created this gist Nov 3, 2018.
    293 changes: 293 additions & 0 deletions ANSI.md
    View file
    Original file line number Diff line number Diff line change
    @@ -0,0 +1,293 @@
    # ANSI Escape Sequences

    Standard escape codes are prefixed with `Escape`:

    - Ctrl-Key: `^[`
    - Octal: `\033`
    - Unicode: `\u001b`
    - Hexadecimal: `\x1b`
    - Decimal: `27`

    Followed by the command, usually delimited by opening square bracket (`[`) and optionally followed by arguments and the command itself.

    Arguments are delimeted by semi colon (`;`).

    For example:

    ```sh
    \x1b[1;31m # Set style to bold, red foreground.
    ```
    ## General ASCII Codes
    | Name | decimal | octal | hex | C-escape | Ctrl-Key | Description |
    | ----- | ------- | ----- | ---- | -------- | -------- | ------------------------------ |
    | `BEL` | 7 | 007 | 0x07 | `\a` | `^G` | Terminal bell |
    | `BS` | 8 | 010 | 0x08 | `\b` | `^H` | Backspace |
    | `HT` | 9 | 011 | 0x09 | `\t` | `^I` | Horizontal TAB |
    | `LF` | 10 | 012 | 0x0A | `\n` | `^J` | Linefeed (newline) |
    | `VT` | 11 | 013 | 0x0B | `\v` | `^K` | Vertical TAB |
    | `FF` | 12 | 014 | 0x0C | `\f` | `^L` | Formfeed (also: New page `NP`) |
    | `CR` | 13 | 015 | 0x0D | `\r` | `^M` | Carriage return |
    | `ESC` | 27 | 033 | 0x1B | `<none>` | `^[` | Escape character |
    | `DEL` | 127 | 177 | 0x7F | `<none>` | `<none>` | Delete character |
    > Note: The **Ctrl-Key** representation is simply associating the non-printable characters from ASCII code 1 with the printable (letter) characters from ASCII code 65 ("A"). ASCII code 1 would be `^A` (Ctrl-A), while ASCII code 7 (BEL) would be `^G` (Ctrl-G). This is a common representation (and input method) and historically comes from one of the VT series of terminals.
    ## Cursor Controls
    | ESC Code Sequence | Description |
    |:------------------|:------------|
    | `ESC[H` | moves cursor to home position (0, 0) |
    | `ESC[{line};{column}H` <br> `ESC[{line};{column}f` | moves cursor to line #, column # |
    | `ESC[#A` | moves cursor up # lines |
    | `ESC[#B` | moves cursor down # lines |
    | `ESC[#C` | moves cursor right # columns |
    | `ESC[#D` | moves cursor left # columns |
    | `ESC[#E` | moves cursor to beginning of next line, # lines down |
    | `ESC[#F` | moves cursor to beginning of previous line, # lines down |
    | `ESC[#G` | moves cursor to column # |
    | `ESC[#;#R` | reports current cursor line and column |
    | `ESC[s` | saves the current cursor position |
    | `ESC[u` | restores the cursor to the last saved position |
    ## Erase Functions
    | ESC Code Sequence | Description |
    |:------------------|:------------|
    | `ESC[J` | clears the screen |
    | `ESC[0J` | clears from cursor until end of screen |
    | `ESC[1J` | clears from cursor to beginning of screen |
    | `ESC[2J` | clears entire screen |
    | `ESC[K` | clears the current line |
    | `ESC[0K` | clears from cursor to end of line |
    | `ESC[1K` | clears from cursor to start of line |
    | `ESC[2K` | clears entire line |
    ## Colors / Graphics Mode
    | ESC Code Sequence | Description |
    |:------------------|:------------|
    | `ESC[{...}m` | Set styles and colors for cell and onward. |
    | `ESC[0m` | reset all styles and colors |
    | `ESC[1m` | set style to bold |
    | `ESC[2m` | set style to dim |
    | `ESC[2m` | set style to dim |
    ### Color codes
    Most terminals support 8 and 16 colors, as well as 256 (8-bit) colors. These colors are set by the user, but have commonly defined meanings.
    #### 8-16 Colors
    | Color Name | Foreground Color Code | Background Color Code |
    |:------------------|:------------|:------------|
    | Black | `30` | `40` |
    | Red | `31` | `41` |
    | Green | `32` | `42` |
    | Yellow | `33` | `43` |
    | Blue | `34` | `44` |
    | Magenta | `35` | `45` |
    | Cyan | `36` | `46` |
    | White | `37` | `47` |
    | Reset | `0` | `0` |
    > Note: The **Reset** is the reset code that resets _all_ colors and text effects.
    Most terminals, apart from the basic set of 8 colors, also support the "bright" or "bold" colors. These have their own set of codes, mirroring the normal colors, but with an additional `;1` in their codes:
    ```sh
    # Set style to bold, red foreground.
    \x1b[1;31mHello
    # Set style to dimmed white foreground with red background.
    \x1b[2;37;41mWorld
    ```
    #### 256 Colors
    The following escape code tells the terminal to use the given color ID:
    ```
    ESC[38;5;${ID}m
    ```
    | ESC Code Sequence | Description |
    |:------------------|:------------|
    | `ESC[38;5;${ID}m` | Set foreground color. |
    | `ESC[48;5;${ID}m` | Set background color. |
    Where **ID** is the color index from 0 to 255 of the color table:
    ![256 Color table](https://user-images.githubusercontent.com/995050/47952855-ecb12480-df75-11e8-89d4-ac26c50e80b9.png)
    The table starts with the original 16 colors (0-15).
    The proceeding 216 colors (16-231) or formed by a 3bpc RGB value offset by 16, packed into a single value.
    The final 24 colors (232-256) are grayscale starting from a shade slighly lighter than black, ranging up to shade slightly darker than white.
    Some emulators interpret these steps as linear increments from (`256 / 24`) on all three channels, although some emulators may explicitly define these values.
    #### RGB Colors
    More modern terminals supports [Truecolor](https://en.wikipedia.org/wiki/Color_depth#True_color_.2824-bit.29) (24-bit RGB), which allows you to set foreground and background colors using RGB.
    These escape sequences are usually not well documented.
    | ESC Code Sequence | Description |
    |:------------------|:------------|
    | `ESC[38;2;{r};{g};{b}m` | Set foreground color as RGB. |
    | `ESC[48;2;{r};{g};{b}m` | Set background color as RGB. |
    > Note that `;38` and `;48` corresponds to the 16 color sequence and is interpreted by the terminal to set the foreground and background color respectively. Where as `;2` and `;5` sets the color format.
    ## Screen Modes
    ### Set Mode
    | ESC Code Sequence | Description |
    |:------------------|:------------|
    | `ESC[={value}h` | Changes the screen width or type to the mode specified by value. |
    | `ESC[=0h` | 40 x 25 monochrome (text) |
    | `ESC[=1h` | 40 x 25 color (text) |
    | `ESC[=2h` | 80 x 25 monochrome (text) |
    | `ESC[=3h` | 80 x 25 color (text) |
    | `ESC[=4h` | 320 x 200 4-color (graphics) |
    | `ESC[=5h` | 320 x 200 monochrome (graphics) |
    | `ESC[=6h` | 640 x 200 monochrome (graphics) |
    | `ESC[=7h` | Enables line wrapping |
    | `ESC[=13h` | 320 x 200 color (graphics) |
    | `ESC[=14h` | 640 x 200 color (16-color graphics) |
    | `ESC[=15h` | 640 x 350 monochrome (2-color graphics) |
    | `ESC[=16h` | 640 x 350 color (16-color graphics) |
    | `ESC[=17h` | 640 x 480 monochrome (2-color graphics) |
    | `ESC[=18h` | 640 x 480 color (16-color graphics) |
    | `ESC[=19h` | 320 x 200 color (256-color graphics) |
    | `ESC[={value}l` | Resets the mode by using the same values that Set Mode uses, except for 7, which disables line wrapping. The last character in this escape sequence is a lowercase L. |
    ### Example Modes
    | ESC Code Sequence | Description |
    | `ESC[?25l` | make cursor invisible |
    | `ESC[?25h` | make cursor visible |
    | `ESC[?47l` | restore screen |
    | `ESC[?47h` | save screen |
    ### Keyboard Strings
    ```sh
    ESC[{code};{string};{...}p
    ```
    Redefines a keyboard key to a specified string.
    The parameters for this escape sequence are defined as follows:
    Code is one or more of the values listed in the following table. These values represent keyboard keys and key combinations. When using these values in a command, you must type the semicolons shown in this table in addition to the semicolons required by the escape sequence. The codes in parentheses are not available on some keyboards. ANSI.SYS will not interpret the codes in parentheses for those keyboards unless you specify the /X switch in the DEVICE command for ANSI.SYS.
    String is either the ASCII code for a single character or a string contained in quotation marks. For example, both 65 and "A" can be used to represent an uppercase A.
    IMPORTANT: Some of the values in the following table are not valid for all computers. Check your computer's documentation for values that are different.
    | Key | Code | SHIFT+code | CTRL+code | ALT+code |
    | ------------------------ | -------- | ---------- | --------- | --------- |
    | F1 | 0;59 | 0;84 | 0;94 | 0;104 |
    | F2 | 0;60 | 0;85 | 0;95 | 0;105 |
    | F3 | 0;61 | 0;86 | 0;96 | 0;106 |
    | F4 | 0;62 | 0;87 | 0;97 | 0;107 |
    | F5 | 0;63 | 0;88 | 0;98 | 0;108 |
    | F6 | 0;64 | 0;89 | 0;99 | 0;109 |
    | F7 | 0;65 | 0;90 | 0;100 | 0;110 |
    | F8 | 0;66 | 0;91 | 0;101 | 0;111 |
    | F9 | 0;67 | 0;92 | 0;102 | 0;112 |
    | F10 | 0;68 | 0;93 | 0;103 | 0;113 |
    | F11 | 0;133 | 0;135 | 0;137 | 0;139 |
    | F12 | 0;134 | 0;136 | 0;138 | 0;140 |
    | HOME (num keypad) | 0;71 | 55 | 0;119 | \-- |
    | UP ARROW (num keypad) | 0;72 | 56 | (0;141) | \-- |
    | PAGE UP (num keypad) | 0;73 | 57 | 0;132 | \-- |
    | LEFT ARROW (num keypad) | 0;75 | 52 | 0;115 | \-- |
    | RIGHT ARROW (num keypad) | 0;77 | 54 | 0;116 | \-- |
    | END (num keypad) | 0;79 | 49 | 0;117 | \-- |
    | DOWN ARROW (num keypad) | 0;80 | 50 | (0;145) | \-- |
    | PAGE DOWN (num keypad) | 0;81 | 51 | 0;118 | \-- |
    | INSERT (num keypad) | 0;82 | 48 | (0;146) | \-- |
    | DELETE (num keypad) | 0;83 | 46 | (0;147) | \-- |
    | HOME | (224;71) | (224;71) | (224;119) | (224;151) |
    | UP ARROW | (224;72) | (224;72) | (224;141) | (224;152) |
    | PAGE UP | (224;73) | (224;73) | (224;132) | (224;153) |
    | LEFT ARROW | (224;75) | (224;75) | (224;115) | (224;155) |
    | RIGHT ARROW | (224;77) | (224;77) | (224;116) | (224;157) |
    | END | (224;79) | (224;79) | (224;117) | (224;159) |
    | DOWN ARROW | (224;80) | (224;80) | (224;145) | (224;154) |
    | PAGE DOWN | (224;81) | (224;81) | (224;118) | (224;161) |
    | INSERT | (224;82) | (224;82) | (224;146) | (224;162) |
    | DELETE | (224;83) | (224;83) | (224;147) | (224;163) |
    | PRINT SCREEN | \-- | \-- | 0;114 | \-- |
    | PAUSE/BREAK | \-- | \-- | 0;0 | \-- |
    | BACKSPACE | 8 | 8 | 127 | (0) |
    | ENTER | 13 | \-- | 10 | (0 |
    | TAB | 9 | 0;15 | (0;148) | (0;165) |
    | NULL | 0;3 | \-- | \-- | \-- |
    | A | 97 | 65 | 1 | 0;30 |
    | B | 98 | 66 | 2 | 0;48 |
    | C | 99 | 66 | 3 | 0;46 |
    | D | 100 | 68 | 4 | 0;32 |
    | E | 101 | 69 | 5 | 0;18 |
    | F | 102 | 70 | 6 | 0;33 |
    | G | 103 | 71 | 7 | 0;34 |
    | H | 104 | 72 | 8 | 0;35 |
    | I | 105 | 73 | 9 | 0;23 |
    | J | 106 | 74 | 10 | 0;36 |
    | K | 107 | 75 | 11 | 0;37 |
    | L | 108 | 76 | 12 | 0;38 |
    | M | 109 | 77 | 13 | 0;50 |
    | N | 110 | 78 | 14 | 0;49 |
    | O | 111 | 79 | 15 | 0;24 |
    | P | 112 | 80 | 16 | 0;25 |
    | Q | 113 | 81 | 17 | 0;16 |
    | R | 114 | 82 | 18 | 0;19 |
    | S | 115 | 83 | 19 | 0;31 |
    | T | 116 | 84 | 20 | 0;20 |
    | U | 117 | 85 | 21 | 0;22 |
    | V | 118 | 86 | 22 | 0;47 |
    | W | 119 | 87 | 23 | 0;17 |
    | X | 120 | 88 | 24 | 0;45 |
    | Y | 121 | 89 | 25 | 0;21 |
    | Z | 122 | 90 | 26 | 0;44 |
    | 1 | 49 | 33 | \-- | 0;120 |
    | 2 | 50 | 64 | 0 | 0;121 |
    | 3 | 51 | 35 | \-- | 0;122 |
    | 4 | 52 | 36 | \-- | 0;123 |
    | 5 | 53 | 37 | \-- | 0;124 |
    | 6 | 54 | 94 | 30 | 0;125 |
    | 7 | 55 | 38 | \-- | 0;126 |
    | 8 | 56 | 42 | \-- | 0;126 |
    | 9 | 57 | 40 | \-- | 0;127 |
    | 0 | 48 | 41 | \-- | 0;129 |
    | \- | 45 | 95 | 31 | 0;130 |
    | \= | 61 | 43 | \--- | 0;131 |
    | \[ | 91 | 123 | 27 | 0;26 |
    | \] | 93 | 125 | 29 | 0;27 |
    | | 92 | 124 | 28 | 0;43 |
    | ; | 59 | 58 | \-- | 0;39 |
    | ' | 39 | 34 | \-- | 0;40 |
    | , | 44 | 60 | \-- | 0;51 |
    | . | 46 | 62 | \-- | 0;52 |
    | / | 47 | 63 | \-- | 0;53 |
    | \` | 96 | 126 | \-- | (0;41) |
    | ENTER (keypad) | 13 | \-- | 10 | (0;166) |
    | / (keypad) | 47 | 47 | (0;142) | (0;74) |
    | \* (keypad) | 42 | (0;144) | (0;78) | \-- |
    | \- (keypad) | 45 | 45 | (0;149) | (0;164) |
    | \+ (keypad) | 43 | 43 | (0;150) | (0;55) |
    | 5 (keypad) | (0;76) | 53 | (0;143) | \-- |
    ## Resources
    - [Wikipedia: ANSI escape code](https://en.wikipedia.org/wiki/ANSI_escape_code)
    - [Build your own Command Line with ANSI escape codes](http://www.lihaoyi.com/post/BuildyourownCommandLinewithANSIescapecodes.html)
    - [ascii-table: ANSI Escape sequences](http://ascii-table.com/ansi-escape-sequences.php)
    - [bluesock: ansi codes](https://bluesock.org/~willkg/dev/ansi.html)
    - [bash-hackers: Terminal Codes (ANSI/VT100) introduction](http://wiki.bash-hackers.org/scripting/terminalcodes)