Skip to content

Instantly share code, notes, and snippets.

@billchurch

billchurch/timed_light.yaml

Last active June 2, 2024 12:08
Show Gist options
  • Save billchurch/787fd7b0032889c7bad0871981c5c5bd to your computer and use it in GitHub Desktop.
Save billchurch/787fd7b0032889c7bad0871981c5c5bd to your computer and use it in GitHub Desktop.
Download ZIP

Revisions

  1. billchurch revised this gist Jun 2, 2024. No changes.
  2. billchurch revised this gist May 18, 2024. 1 changed file with 12 additions and 0 deletions.
    12 changes: 12 additions & 0 deletions timed_light.yaml
    View file
    Original file line number Diff line number Diff line change
    @@ -6,6 +6,7 @@ substitutions:
    location: Garage
    ha_timer_number: input_number.garage_light_timer
    switch_name: Garage Interior Light Switch
    motion_sensor_name: binary_sensor.motion_garage_motion_2

    esphome:
    name: ${device_name}
    @@ -116,6 +117,10 @@ binary_sensor:
    id: switchid
    - platform: status
    name: "${friendly_name} Status"
    - platform: homeassistant
    name: "${motion_sensor_name}"
    entity_id: ${motion_sensor_name}
    id: motion_sensor

    status_led:
    pin: GPIO5
    @@ -161,13 +166,20 @@ script:
    - switch.is_off: timer_disable
    then:
    - delay: !lambda "return (id(delay_length_global) - ${pre_off_warning}) * 1000;"
    - logger.log:
    format: "Script has hit pre_off_warning: ${pre_off_warning} seconds"
    - repeat:
    count: ${pre_off_warning}
    then:
    - output.turn_off: statuslight
    - delay: 1s
    - output.turn_on: statuslight
    - delay: 1s
    - if:
    condition:
    binary_sensor.is_on: motion_sensor
    then:
    - script.execute: start_timer
    - light.turn_off: lightid
    - output.turn_off: statuslight

  3. billchurch revised this gist May 18, 2024. No changes.
  4. billchurch created this gist May 18, 2024.
    203 changes: 203 additions & 0 deletions timed_light.yaml
    View file
    Original file line number Diff line number Diff line change
    @@ -0,0 +1,203 @@
    substitutions:
    device_name: garage-light
    friendly_name: Garage Light
    default_delay: '900' # default delay of 15 minutes (900 seconds)
    pre_off_warning: '30' # pre-off warning period in seconds
    location: Garage
    ha_timer_number: input_number.garage_light_timer
    switch_name: Garage Interior Light Switch

    esphome:
    name: ${device_name}
    comment: ${friendly_name}
    platform: ESP8266
    board: esp01_1m
    esp8266_restore_from_flash: true

    globals:
    - id: delay_length_global
    type: int
    restore_value: yes
    initial_value: ${default_delay}
    - id: flash_count
    type: int
    restore_value: no
    initial_value: '0'

    wifi:
    ssid: !secret wifissid
    password: !secret wifipass
    fast_connect: off
    domain: !secret domain
    power_save_mode: none
    ap:
    ssid: "${device_name} Fallback Hotspot"
    password: !secret wifipass

    logger:
    baud_rate: 0

    api:
    encryption:
    key: !secret esphome_key
    reboot_timeout: 0s
    services:
    - service: start_${device_name}_timer
    then:
    - script.execute: start_timer
    - service: update_delay_length
    variables:
    delay_length: int
    then:
    - lambda: |-
    id(delay_length_global) = delay_length;
    ESP_LOGD("main", "Delay length updated to %d seconds", delay_length);
    id(start_timer).execute();
    ota:

    # Device Specific Config
    output:
    - platform: gpio
    pin: GPIO12
    id: relay1
    - platform: gpio
    pin: GPIO4
    id: statuslight

    light:
    - platform: binary
    name: ${friendly_name}
    output: relay1
    id: lightid
    on_turn_on:
    then:
    - script.execute: start_timer
    - script.execute: flash_status_light
    on_turn_off:
    then:
    - output.turn_off: statuslight

    binary_sensor:
    - platform: gpio
    pin:
    number: GPIO13
    mode: INPUT_PULLUP
    inverted: True
    name: "${switch_name}"
    on_multi_click:
    # single click
    - timing:
    - ON for at most 1s
    - OFF for at least 0.5s
    then:
    - light.toggle: lightid
    - script.execute: flash_status_light
    - if:
    condition:
    light.is_on: lightid
    then:
    - script.execute: start_timer
    # double click
    - timing:
    - ON for at most 1s
    - OFF for at most 1s
    - ON for at most 1s
    - OFF for at least 0.2s
    then:
    - switch.toggle: timer_disable
    # long click
    - timing:
    - ON for at least 1.5s
    then:
    - switch.turn_off: timer_disable

    internal: true
    id: switchid
    - platform: status
    name: "${friendly_name} Status"

    status_led:
    pin: GPIO5

    text_sensor:
    - platform: version
    name: ${friendly_name} ESPHome Version

    sensor:
    - platform: homeassistant
    entity_id: ${ha_timer_number}
    id: delay_length_sensor
    internal: true
    on_value:
    then:
    - lambda: |-
    id(delay_length_global) = int(id(delay_length_sensor).state);
    ESP_LOGD("main", "Delay length updated to %d seconds from Home Assistant", int(id(delay_length_sensor).state));
    interval:
    - interval: 2min
    then:
    - if:
    condition:
    wifi.connected:
    then:
    - homeassistant.service:
    service: homeassistant.update_entity
    data:
    entity_id: ${ha_timer_number}

    script:
    - id: flash_status_light
    then:
    - output.turn_off: statuslight
    - delay: 500ms
    - output.turn_on: statuslight
    - id: start_timer
    mode: restart # Change mode to restart
    then:
    - if:
    condition:
    - switch.is_off: timer_disable
    then:
    - delay: !lambda "return (id(delay_length_global) - ${pre_off_warning}) * 1000;"
    - repeat:
    count: ${pre_off_warning}
    then:
    - output.turn_off: statuslight
    - delay: 1s
    - output.turn_on: statuslight
    - delay: 1s
    - light.turn_off: lightid
    - output.turn_off: statuslight

    switch:
    - platform: template
    name: "Timer Disable"
    id: timer_disable
    optimistic: true
    on_turn_on:
    then:
    # this is kind of lame but i wanted a different
    # flash and this was the easiest way for me
    - script.execute: flash_status_light
    - delay: 2.1s
    - script.execute: flash_status_light
    on_turn_off:
    then:
    - if:
    condition:
    light.is_on: lightid
    then:
    - script.execute: start_timer

    time:
    # when the clock strikes 12, re-enable the timer
    - platform: homeassistant
    id: homeassistant_time
    on_time:
    - seconds: 0
    minutes: 0
    hours: 0
    then:
    - switch.turn_off: timer_disable