List of parts to print for Voron 2.4 organized by the Assembly Manuals order of assembly, allowing for just-in-time printing of parts while building the printer. Configuration is standard Voron 2.4 (Afterburner Direct Feed, DIN rail mounts) with choices for E3D, Dragon or Mosquito hot ends on a 250mm, 300mm or 350mm frame. No parts for the drag chain are included, as usually these are purchased parts rather than printed.

Names of the sections (such as Tools) match the name of the STL directory that contains the prints. Voron Design has recommendations for primary vs. accent colors (accent colors have filenames starting with [a]).

Credit to krobertson for making a Gist of all parts. This Gist is a modified version of that list, organized by order of assembly and removed parts that don't need printing.

[ ] [ ] rail_installation_guide_center_x2.stl

[ ] [ ] _[_a]belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)

[ ] [ ] [a]_belt_tensioner_b_x2.stl

[ ] [ ] [a]_z_drive_baseplate_a_x2.stl

  [ ] [ ] [a]_z_drive_baseplate_b_x2.stl
  [ ] [ ] z_drive_main_a_x2.stl
  [ ] [ ] z_drive_main_b_x2.stl
  [ ] [ ] z_drive_retainer_a_x2.stl
  [ ] [ ] z_drive_retainer_b_x2.stl
  [ ] [ ] z_motor_mount_a_x2.stl
  [ ] [ ] z_motor_mount_b_x2.stl

NOTE: Choose the correct file below based on using a 6mm or 9mm diamter GT20 20T pully.

  [ ] [ ] [ ] [ ] [a]_z_tensioner_x4_6mm.stl <- 6mm pully
  [ ] [ ] [ ] [ ] [a]_z_tensioner_x4_9mm.stl <- 9mm pully
  [ ] [ ] z_tensioner_bracket_a_x2.stl
  [ ] [ ] z_tensioner_bracket_b_x2.stl

  [ ] nozzle_probe.stl

  [ ] [a]_tensioner_left.stl
  [ ] [a]_tensioner_right.stl
  [ ] front_idler_left_lower.stl
  [ ] front_idler_left_upper.stl
  [ ] front_idler_right_lower.stl
  [ ] front_idler_right_upper.stl

  [ ]     [a]_cable_cover.stl
  [ ] [ ] [a]_z_chain_retainer_bracket_x2.stl
  [ ]     a_drive_frame_lower.stl
  [ ]     a_drive_frame_upper.stl
  [ ]     b_drive_frame_lower.stl
  [ ]     b_drive_frame_upper.stl

  [ ] [a]_endstop_pod_hall_effect.stl
  [ ] [a]_endstop_pod_microswitch.stl
  [ ] [a]_xy_joint_cable_bridge_generic.stl
  [ ] [a]_xy_joint_cable_bridge_igus.stl
  [ ] xy_joint_left_lower.stl
  [ ] xy_joint_left_upper.stl
  [ ] xy_joint_right_lower.stl
  [ ] xy_joint_right_upper.stl

  [ ] [ ] [ ] [ ] [a]_z_belt_clip_lower_x4.stl
  [ ] [ ] [ ] [ ] [a]_z_belt_clip_upper_x4.stl
  [ ]             z_chain_bottom_anchor.stl
  [ ]             z_chain_guide.stl

  [ ] [ ] [a]_belt_clamp_x2.stl
  [ ]     [a]_blower_housing_front.stl
  [ ]     blower_housing_rear.stl
  [ ]     hotend_fan_mount.stl
  [ ]     probe_retainer_bracket.stl
  [ ]     x_carriage_frame_left.stl
  [ ]     x_carriage_frame_right.stl
  [ ]     x_carriage_pivot_block.stl

Select only one printhead; this is for E3D

  [ ] printhead_front_e3dv6.stl
  [ ] printhead_rear_e3dv6.stl

Select only one printhead; this is for Mosquito

  [ ] printhead_front_mosquito.stl
  [ ] printhead_rear_mosquito.stl

Select only one printhead; this is for Phaetus Dragon

  [ ] printhead_front_dragon.stl
  [ ] printhead_rear_dragon.stl

Select the chain anchor (generic or igus) that matches your drag chain choice

  [ ] [a]_connector_cover.stl
  [ ] [a]_guidler.stl
  [ ] [a]_latch.stl
  [ ] chain_anchor_generic.stl
  [ ] chain_anchor_igus.stl
  [ ] extruder_body.stl
  [ ] extruder_motor_plate.stl
  [ ] latch_shuttle.stl

  [ ] [ ] [ ] [ ] z_joint_lower_x4.stl
  [ ]             z_joint_upper_hall_effect.stl
  [ ] [ ] [ ] [ ] z_joint_upper_x4.stl

  [ ] [a]_mini12864_case_hinge.stl
  [ ] mini12864_case_front.stl
  [ ] mini12864_case_rear.stl
  [ ] mini12864_spacer.stl

  [ ] plug_panel_filtered_mains.stl

  [ ]     [a]_60mm_fan_blank_insert.stl
  [ ] [ ] [a]_belt_guard_a_x2.stl
  [ ] [ ] [a]_belt_guard_b_x2.stl
  [ ] [ ] side_fan_support_x2.stl

For 250mm frame

  [ ] [ ] front_rear_skirt_a_250_x2.stl
  [ ] [ ] front_rear_skirt_b_250_x2.stl
  [ ] [ ] side_skirt_a_250_x2.stl
  [ ] [ ] side_skirt_b_250_x2.stl

For 300mm frame

  [ ] [ ] front_rear_skirt_a_300_x2.stl
  [ ] [ ] front_rear_skirt_b_300_x2.stl
  [ ] [ ] side_skirt_a_300_x2.stl
  [ ] [ ] side_skirt_b_300_x2.stl

For 350mm frame

  [ ] [ ] front_rear_skirt_a_350_x2.stl
  [ ] [ ] front_rear_skirt_b_350_x2.stl
  [ ] [ ] side_skirt_a_350_x2.stl
  [ ] [ ] side_skirt_b_350_x2.stl

  [ ] [ ] [ ] [ ] door_hinge_x4.stl
  [ ] [ ]         handle_a_x2.stl
  [ ] [ ]         handle_b_x2.stl
  [ ] [ ]         latch_x2.stl

  [ ] [ ] [ ] [ ]                                 bottom_panel_clip_x4.stl
  [ ] [ ]                                         bottom_panel_hinge_x2.stl
  [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] corner_panel_clip_3mm_x12.stl
  [ ] [ ] [ ] [ ]                                 corner_panel_clip_6mm_x4.stl
  [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] midspan_panel_clip_3mm_x12.stl
  [ ] [ ] [ ]                                     midspan_panel_clip_6mm_x3.stl
  [ ] [ ]                                         z_belt_cover_a_x2.stl
  [ ] [ ]                                         z_belt_cover_b_x2.stl

  [ ] bowen_retainer.stl
  [ ] spool_holder.stl

  [ ]     [a]_filter_access_cover.stl
  [ ]     exhaust_filter_grill.stl
  [ ]     exhaust_filter_housing.stl
  [ ] [ ] exhaust_filter_mount_x2.stl

  [ ] [ ]     duet_duex_bracket_x2.stl
  [ ]         lrs_psu_bracket_clip.stl
  [ ] [ ] [ ] pcb_din_clip_x3.stl
  [ ] [ ]     ramps_bracket_x2.stl
  [ ]         raspberrypi_bracket.stl
  [ ]         rs25_psu_bracket_clip.stl
  [ ] [ ]     skr_1.3_bracket_x2.stl
  [ ] [ ]     skr_mini_e2_bracket_x2.stl
  [ ] [ ]     skr_mini_e3_bracket_x2.stl