Skip to content

Instantly share code, notes, and snippets.

@cmidgley

cmidgley/voron_24_printed_parts.md

Last active November 14, 2025 22:58
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save cmidgley/10423bbae72dacb02c46926f60acb7d2 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save cmidgley/10423bbae72dacb02c46926f60acb7d2 to your computer and use it in GitHub Desktop.
Download ZIP

Revisions

  1. cmidgley revised this gist Sep 23, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -288,7 +288,7 @@ _Use these skirts when printing a 350mm frame_

    ```
    [ ] [a]_filter_access_cover.stl
    [ ] [ ] [a]_exhaust_filter_mount_x2.stl <-- Not in CAD drawings/documentation
    [ ] [ ] [a]_exhaust_filter_mount_x2.stl
    [ ] exhaust_filter_grill.stl
    [ ] exhaust_filter_housing.stl
    ```
  2. cmidgley revised this gist Sep 22, 2021. 1 changed file with 2 additions and 2 deletions.
    4 changes: 2 additions & 2 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -103,7 +103,7 @@ _Select one endstop_pod_* , and one xy_joint_cable_bridge_* depending on your ha
    [ ] [ ] [ ] [ ] [a]_z_belt_clip_lower_x4.stl
    [ ] [ ] [ ] [ ] [a]_z_belt_clip_upper_x4.stl
    [ ] z_chain_bottom_anchor.stl
    [ ] z_chain_guide.stl
    [ ] z_chain_guide.stl <-- Not in CAD or documentation
    ```

    --------------------------------------------------------------------------------
    @@ -288,7 +288,7 @@ _Use these skirts when printing a 350mm frame_

    ```
    [ ] [a]_filter_access_cover.stl
    [ ] [ ] [a]_exhaust_filter_mount_x2.stl
    [ ] [ ] [a]_exhaust_filter_mount_x2.stl <-- Not in CAD drawings/documentation
    [ ] exhaust_filter_grill.stl
    [ ] exhaust_filter_housing.stl
    ```
  3. cmidgley revised this gist Sep 19, 2021. 1 changed file with 4 additions and 4 deletions.
    8 changes: 4 additions & 4 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -261,10 +261,10 @@ _Use these skirts when printing a 350mm frame_
    ```
    [ ] [ ] [ ] [ ] bottom_panel_clip_x4.stl
    [ ] [ ] bottom_panel_hinge_x2.stl
    [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] corner_panel_clip_3mm_x12.stl
    [ ] [ ] [ ] [ ] corner_panel_clip_6mm_x4.stl
    [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] midspan_panel_clip_3mm_x12.stl
    [ ] [ ] [ ] midspan_panel_clip_6mm_x3.stl
    [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] corner_panel_clip_3mm_x12.stl <-- 3mm no foam, 6mm w/foam
    [ ] [ ] [ ] [ ] corner_panel_clip_6mm_x4.stl <-- print either the 3mm or
    [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] midspan_panel_clip_3mm_x12.stl <-- the 6mm set
    [ ] [ ] [ ] midspan_panel_clip_6mm_x3.stl <--
    [ ] [ ] z_belt_cover_a_x2.stl
    [ ] [ ] z_belt_cover_b_x2.stl
    ```
  4. cmidgley revised this gist Sep 19, 2021. 1 changed file with 2 additions and 2 deletions.
    4 changes: 2 additions & 2 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -87,8 +87,8 @@ _There are two different GT20 20T pully files; only one set of them should be pr
    _Select one endstop_pod_* , and one xy_joint_cable_bridge_* depending on your hardware kit_

    ```
    [ ] [a]_endstop_pod_hall_effect.stl <- select one vvv (hall effect endstop)
    [ ] [a]_endstop_pod_microswitch.stl <- select one ^^^ (microswitch endstop)
    [ ] [a]_endstop_pod_hall_effect.stl <- select one vvv (hall effect XY endstops)
    [ ] [a]_endstop_pod_microswitch.stl <- select one ^^^ (microswitch XY endstops)
    [ ] [a]_xy_joint_cable_bridge_generic.stl <= select one vvv (generic drag chain)
    [ ] [a]_xy_joint_cable_bridge_igus.stl <= select one ^^^ (igus drag chain)
    [ ] xy_joint_left_lower.stl
  5. cmidgley revised this gist Sep 19, 2021. 1 changed file with 2 additions and 2 deletions.
    4 changes: 2 additions & 2 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -173,8 +173,8 @@ _Select the chain anchor (generic or igus) that matches your drag chain choice_

    ```
    [ ] [ ] [ ] [ ] z_joint_lower_x4.stl
    [ ] z_joint_upper_hall_effect.stl <-- if using hall effect Z sensors
    [ ] [ ] [ ] [ ] z_joint_upper_x4.stl
    [ ] z_joint_upper_hall_effect.stl <-- if using hall effect XY
    [ ] [ ] [ ] [ ] z_joint_upper_x4.stl <-- use x3 if using hall effect XY
    ```

    --------------------------------------------------------------------------------
  6. cmidgley revised this gist Sep 19, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -173,7 +173,7 @@ _Select the chain anchor (generic or igus) that matches your drag chain choice_

    ```
    [ ] [ ] [ ] [ ] z_joint_lower_x4.stl
    [ ] z_joint_upper_hall_effect.stl
    [ ] z_joint_upper_hall_effect.stl <-- if using hall effect Z sensors
    [ ] [ ] [ ] [ ] z_joint_upper_x4.stl
    ```

  7. cmidgley revised this gist Sep 7, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -2,7 +2,7 @@

    List of parts to print for [Voron 2.4](https://github.com/VoronDesign/Voron-2) organized by the [Assembly Manuals](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/Docs/2.4_Assembly_Manual.pdf) order of assembly, allowing for just-in-time printing of parts while building the printer. Configuration is standard Voron 2.4 (Afterburner Direct Feed, DIN rail mounts) with choices for E3D, Dragon or Mosquito hot ends on a 250mm, 300mm or 350mm frame. No parts for the drag chain are included, as often these are purchased parts rather than printed.

    Names of the sections (such as `Tools`) match the name of the [STL directory](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4) that contains the prints. Voron Design has recommendations for primary vs. accent colors (accent colors have filenames starting with `[a]`).
    Names of the sections (such as `Gantry/X_Axis/XY Joints`) match the name of the [STL directory](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4) that contains the prints. Note that Voron Design uses filenames starting with `[a]_` at the start of a filename to indicate parts that can be printed in an accent color.

    _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e122705c9ac6bb21) for making a Gist of all parts. This Gist is a modified version of that list, organized by order of assembly, removed parts that don't need printing, identified parts that are optional or specific to a build, and fixed a few incorrect part listings._

  8. cmidgley revised this gist Sep 7, 2021. 1 changed file with 2 additions and 2 deletions.
    4 changes: 2 additions & 2 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -1,10 +1,10 @@
    ### Voron 2.4 Printed Parts List

    List of parts to print for [Voron 2.4](https://github.com/VoronDesign/Voron-2) organized by the [Assembly Manuals](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/Docs/2.4_Assembly_Manual.pdf) order of assembly, allowing for just-in-time printing of parts while building the printer. Configuration is standard Voron 2.4 (Afterburner Direct Feed, DIN rail mounts) with choices for E3D, Dragon or Mosquito hot ends on a 250mm, 300mm or 350mm frame. No parts for the drag chain are included, as usually these are purchased parts rather than printed.
    List of parts to print for [Voron 2.4](https://github.com/VoronDesign/Voron-2) organized by the [Assembly Manuals](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/Docs/2.4_Assembly_Manual.pdf) order of assembly, allowing for just-in-time printing of parts while building the printer. Configuration is standard Voron 2.4 (Afterburner Direct Feed, DIN rail mounts) with choices for E3D, Dragon or Mosquito hot ends on a 250mm, 300mm or 350mm frame. No parts for the drag chain are included, as often these are purchased parts rather than printed.

    Names of the sections (such as `Tools`) match the name of the [STL directory](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4) that contains the prints. Voron Design has recommendations for primary vs. accent colors (accent colors have filenames starting with `[a]`).

    _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e122705c9ac6bb21) for making a Gist of all parts. This Gist is a modified version of that list, organized by order of assembly and removed parts that don't need printing._
    _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e122705c9ac6bb21) for making a Gist of all parts. This Gist is a modified version of that list, organized by order of assembly, removed parts that don't need printing, identified parts that are optional or specific to a build, and fixed a few incorrect part listings._

    --------------------------------------------------------------------------------

  9. cmidgley revised this gist Sep 7, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -88,7 +88,7 @@ _Select one endstop_pod_* , and one xy_joint_cable_bridge_* depending on your ha

    ```
    [ ] [a]_endstop_pod_hall_effect.stl <- select one vvv (hall effect endstop)
    [ ] [a]_endstop_pod_microswitch.stl <- select one ^^^ (microsoft endstop)
    [ ] [a]_endstop_pod_microswitch.stl <- select one ^^^ (microswitch endstop)
    [ ] [a]_xy_joint_cable_bridge_generic.stl <= select one vvv (generic drag chain)
    [ ] [a]_xy_joint_cable_bridge_igus.stl <= select one ^^^ (igus drag chain)
    [ ] xy_joint_left_lower.stl
  10. cmidgley revised this gist Sep 7, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -203,7 +203,7 @@ _Select the chain anchor (generic or igus) that matches your drag chain choice_
    #### [Skirts](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Skirts)

    ```
    [ ] [a]_60mm_fan_blank_insert.stl
    [ ] [ ] [a]_60mm_fan_blank_insert_x2.stl
    [ ] [ ] [a]_belt_guard_a_x2.stl
    [ ] [ ] [a]_belt_guard_b_x2.stl
    [ ] [ ] side_fan_support_x2.stl
  11. cmidgley revised this gist Sep 7, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -288,9 +288,9 @@ _Use these skirts when printing a 350mm frame_

    ```
    [ ] [a]_filter_access_cover.stl
    [ ] [ ] [a]_exhaust_filter_mount_x2.stl
    [ ] exhaust_filter_grill.stl
    [ ] exhaust_filter_housing.stl
    [ ] [ ] exhaust_filter_mount_x2.stl
    ```

    --------------------------------------------------------------------------------
  12. cmidgley revised this gist Sep 7, 2021. 1 changed file with 11 additions and 9 deletions.
    20 changes: 11 additions & 9 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -40,8 +40,8 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227
    _There are two different GT20 20T pully files; only one set of them should be printed_

    ```
    [ ] [ ] [ ] [ ] [a]_z_tensioner_x4_6mm.stl <- 6mm pully
    [ ] [ ] [ ] [ ] [a]_z_tensioner_x4_9mm.stl <- 9mm pully
    [ ] [ ] [ ] [ ] [a]_z_tensioner_x4_6mm.stl <- select one vvv (6mm pully)
    [ ] [ ] [ ] [ ] [a]_z_tensioner_x4_9mm.stl <- select one ^^^ (9mm pully)
    [ ] [ ] z_tensioner_bracket_a_x2.stl
    [ ] [ ] z_tensioner_bracket_b_x2.stl
    ```
    @@ -84,11 +84,13 @@ _There are two different GT20 20T pully files; only one set of them should be pr

    #### [Gantry/X_Axis/XY Joints](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Gantry/X_Axis/XY_Joints)

    _Select one endstop_pod_* , and one xy_joint_cable_bridge_* depending on your hardware kit_

    ```
    [ ] [a]_endstop_pod_hall_effect.stl
    [ ] [a]_endstop_pod_microswitch.stl
    [ ] [a]_xy_joint_cable_bridge_generic.stl
    [ ] [a]_xy_joint_cable_bridge_igus.stl
    [ ] [a]_endstop_pod_hall_effect.stl <- select one vvv (hall effect endstop)
    [ ] [a]_endstop_pod_microswitch.stl <- select one ^^^ (microsoft endstop)
    [ ] [a]_xy_joint_cable_bridge_generic.stl <= select one vvv (generic drag chain)
    [ ] [a]_xy_joint_cable_bridge_igus.stl <= select one ^^^ (igus drag chain)
    [ ] xy_joint_left_lower.stl
    [ ] xy_joint_left_upper.stl
    [ ] xy_joint_right_lower.stl
    @@ -132,7 +134,7 @@ _Select only one printhead; this is for E3D_

    #### [Gantry/X_Axis/X Carriage/Printheads/Slice Mosquito](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Gantry/X_Axis/X_Carriage/Printheads/Slice_Mosquito)

    _Select only one printhead; this is for Mosquito_
    _Select only one printhead; this is for Slice Mosquito_

    ```
    [ ] printhead_front_mosquito.stl
    @@ -156,8 +158,8 @@ _Select the chain anchor (generic or igus) that matches your drag chain choice_
    [ ] [a]_connector_cover.stl
    [ ] [a]_guidler.stl
    [ ] [a]_latch.stl
    [ ] chain_anchor_generic.stl
    [ ] chain_anchor_igus.stl
    [ ] chain_anchor_generic.stl <-- select one vvv (generic drag chain)
    [ ] chain_anchor_igus.stl <-- select one ^^^ (igus drag chain)
    [ ] extruder_body.stl
    [ ] extruder_motor_plate.stl
    [ ] latch_shuttle.stl
  13. cmidgley revised this gist Sep 5, 2021. 1 changed file with 147 additions and 139 deletions.
    286 changes: 147 additions & 139 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -10,10 +10,10 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227

    ### Frame (page 10)

    #### Tools
    #### [Tools](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Tools)

    ```
    [ ] [ ] rail_installation_guide_center_x2.stl
    [ ] [ ] rail_installation_guide_center_x2.stl
    ```

    --------------------------------------------------------------------------------
    @@ -23,282 +23,290 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227
    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    ```
    [ ] [ ] [a]_belt_tensioner_a_x2.stl
    [ ] [ ] [a]_belt_tensioner_b_x2.stl
    [ ] [ ] [a]_z_drive_baseplate_a_x2.stl
    [ ] [ ] [a]_z_drive_baseplate_b_x2.stl
    [ ] [ ] z_drive_main_a_x2.stl
    [ ] [ ] z_drive_main_b_x2.stl
    [ ] [ ] z_drive_retainer_a_x2.stl
    [ ] [ ] z_drive_retainer_b_x2.stl
    [ ] [ ] z_motor_mount_a_x2.stl
    [ ] [ ] z_motor_mount_b_x2.stl
    [ ] [ ] [a]_belt_tensioner_a_x2.stl
    [ ] [ ] [a]_belt_tensioner_b_x2.stl
    [ ] [ ] [a]_z_drive_baseplate_a_x2.stl
    [ ] [ ] [a]_z_drive_baseplate_b_x2.stl
    [ ] [ ] z_drive_main_a_x2.stl
    [ ] [ ] z_drive_main_b_x2.stl
    [ ] [ ] z_drive_retainer_a_x2.stl
    [ ] [ ] z_drive_retainer_b_x2.stl
    [ ] [ ] z_motor_mount_a_x2.stl
    [ ] [ ] z_motor_mount_b_x2.stl
    ```

    #### Z_Idlers
    #### [Z_Idlers](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Idlers)

    _NOTE: Choose the correct file below based on using a 6mm or 9mm diamter GT20 20T pully._
    _There are two different GT20 20T pully files; only one set of them should be printed_

    ```
    [ ] [ ] [ ] [ ] [a]_z_tensioner_x4_6mm.stl <- 6mm pully
    [ ] [ ] [ ] [ ] [a]_z_tensioner_x4_9mm.stl <- 9mm pully
    [ ] [ ] z_tensioner_bracket_a_x2.stl
    [ ] [ ] z_tensioner_bracket_b_x2.stl
    [ ] [ ] [ ] [ ] [a]_z_tensioner_x4_6mm.stl <- 6mm pully
    [ ] [ ] [ ] [ ] [a]_z_tensioner_x4_9mm.stl <- 9mm pully
    [ ] [ ] z_tensioner_bracket_a_x2.stl
    [ ] [ ] z_tensioner_bracket_b_x2.stl
    ```

    #### Z_Endstop
    #### [Z_Endstop](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Endstop)

    ```
    [ ] nozzle_probe.stl
    [ ] nozzle_probe.stl
    ```

    --------------------------------------------------------------------------------

    ### AB Drive Modules (page 38)

    #### Gantry/Front_Idlers
    #### [Gantry/Front_Idlers](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Gantry/Front_Idlers)

    ```
    [ ] [a]_tensioner_left.stl
    [ ] [a]_tensioner_right.stl
    [ ] front_idler_left_lower.stl
    [ ] front_idler_left_upper.stl
    [ ] front_idler_right_lower.stl
    [ ] front_idler_right_upper.stl
    [ ] [a]_tensioner_left.stl
    [ ] [a]_tensioner_right.stl
    [ ] front_idler_left_lower.stl
    [ ] front_idler_left_upper.stl
    [ ] front_idler_right_lower.stl
    [ ] front_idler_right_upper.stl
    ```

    #### Gantry/AB_Drive_Units
    #### [Gantry/AB_Drive_Units](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Gantry/AB_Drive_Units)

    ```
    [ ] [a]_cable_cover.stl
    [ ] [ ] [a]_z_chain_retainer_bracket_x2.stl
    [ ] a_drive_frame_lower.stl
    [ ] a_drive_frame_upper.stl
    [ ] b_drive_frame_lower.stl
    [ ] b_drive_frame_upper.stl
    [ ] [a]_cable_cover.stl
    [ ] [ ] [a]_z_chain_retainer_bracket_x2.stl
    [ ] a_drive_frame_lower.stl
    [ ] a_drive_frame_upper.stl
    [ ] b_drive_frame_lower.stl
    [ ] b_drive_frame_upper.stl
    ```

    --------------------------------------------------------------------------------

    ### Gantry / Unnamed (page 46)
    ### Gantry (page 46)

    #### Gantry/X_Axis/XY Joints
    #### [Gantry/X_Axis/XY Joints](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Gantry/X_Axis/XY_Joints)

    ```
    [ ] [a]_endstop_pod_hall_effect.stl
    [ ] [a]_endstop_pod_microswitch.stl
    [ ] [a]_xy_joint_cable_bridge_generic.stl
    [ ] [a]_xy_joint_cable_bridge_igus.stl
    [ ] xy_joint_left_lower.stl
    [ ] xy_joint_left_upper.stl
    [ ] xy_joint_right_lower.stl
    [ ] xy_joint_right_upper.stl
    [ ] [a]_endstop_pod_hall_effect.stl
    [ ] [a]_endstop_pod_microswitch.stl
    [ ] [a]_xy_joint_cable_bridge_generic.stl
    [ ] [a]_xy_joint_cable_bridge_igus.stl
    [ ] xy_joint_left_lower.stl
    [ ] xy_joint_left_upper.stl
    [ ] xy_joint_right_lower.stl
    [ ] xy_joint_right_upper.stl
    ```

    #### Gantry
    #### [Gantry](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Gantry)

    ```
    [ ] [ ] [ ] [ ] [a]_z_belt_clip_lower_x4.stl
    [ ] [ ] [ ] [ ] [a]_z_belt_clip_upper_x4.stl
    [ ] z_chain_bottom_anchor.stl
    [ ] z_chain_guide.stl
    [ ] [ ] [ ] [ ] [a]_z_belt_clip_lower_x4.stl
    [ ] [ ] [ ] [ ] [a]_z_belt_clip_upper_x4.stl
    [ ] z_chain_bottom_anchor.stl
    [ ] z_chain_guide.stl
    ```

    --------------------------------------------------------------------------------

    ### Afterburner (page 58)

    #### Gantry/X_Axis/X Carriage
    #### [Gantry/X_Axis/X Carriage](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Gantry/X_Axis/X_Carriage)

    ```
    [ ] [ ] [a]_belt_clamp_x2.stl
    [ ] [a]_blower_housing_front.stl
    [ ] blower_housing_rear.stl
    [ ] hotend_fan_mount.stl
    [ ] probe_retainer_bracket.stl
    [ ] x_carriage_frame_left.stl
    [ ] x_carriage_frame_right.stl
    [ ] x_carriage_pivot_block.stl
    [ ] [ ] [a]_belt_clamp_x2.stl
    [ ] [a]_blower_housing_front.stl
    [ ] blower_housing_rear.stl
    [ ] hotend_fan_mount.stl
    [ ] probe_retainer_bracket.stl
    [ ] x_carriage_frame_left.stl
    [ ] x_carriage_frame_right.stl
    [ ] x_carriage_pivot_block.stl
    ```

    #### Gantry/X_Axis/X Carriage/Printheads/E3D V6
    #### [Gantry/X_Axis/X Carriage/Printheads/E3D V6](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Gantry/X_Axis/X_Carriage/Printheads/E3D_V6)

    _Select only one printhead; this is for E3D_

    ```
    [ ] printhead_front_e3dv6.stl
    [ ] printhead_rear_e3dv6.stl
    [ ] printhead_front_e3dv6.stl
    [ ] printhead_rear_e3dv6.stl
    ```

    #### Gantry/X_Axis/X Carriage/Printheads/Slice Mosquito
    #### [Gantry/X_Axis/X Carriage/Printheads/Slice Mosquito](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Gantry/X_Axis/X_Carriage/Printheads/Slice_Mosquito)

    _Select only one printhead; this is for Mosquito_

    ```
    [ ] printhead_front_mosquito.stl
    [ ] printhead_rear_mosquito.stl
    [ ] printhead_front_mosquito.stl
    [ ] printhead_rear_mosquito.stl
    ```

    #### Gantry/X_Axis/X Carriage/Printheads/TriangleLab Dragon
    #### [Gantry/X_Axis/X Carriage/Printheads/TriangleLab Dragon](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Gantry/X_Axis/X_Carriage/Printheads/TriangleLab_Dragon)

    _Select only one printhead; this is for Phaetus Dragon_

    ```
    [ ] printhead_front_dragon.stl
    [ ] printhead_rear_dragon.stl
    [ ] printhead_front_dragon.stl
    [ ] printhead_rear_dragon.stl
    ```

    #### Gantry/X_Axis/X Carriage/Direct Feed
    #### [Gantry/X_Axis/X Carriage/Direct Feed](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Gantry/X_Axis/X_Carriage/Direct_Feed)

    _Select the chain anchor (generic or igus) that matches your drag chain choice_

    ```
    [ ] [a]_connector_cover.stl
    [ ] [a]_guidler.stl
    [ ] [a]_latch.stl
    [ ] chain_anchor_generic.stl
    [ ] chain_anchor_igus.stl
    [ ] extruder_body.stl
    [ ] extruder_motor_plate.stl
    [ ] latch_shuttle.stl
    [ ] [a]_connector_cover.stl
    [ ] [a]_guidler.stl
    [ ] [a]_latch.stl
    [ ] chain_anchor_generic.stl
    [ ] chain_anchor_igus.stl
    [ ] extruder_body.stl
    [ ] extruder_motor_plate.stl
    [ ] latch_shuttle.stl
    ```

    --------------------------------------------------------------------------------

    ### Belting Z Drive (page 78)

    #### Gantry/Z_Joints
    #### [Gantry/Z_Joints](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Gantry/Z_Joints)

    ```
    [ ] [ ] [ ] [ ] z_joint_lower_x4.stl
    [ ] z_joint_upper_hall_effect.stl
    [ ] [ ] [ ] [ ] z_joint_upper_x4.stl
    [ ] [ ] [ ] [ ] z_joint_lower_x4.stl
    [ ] z_joint_upper_hall_effect.stl
    [ ] [ ] [ ] [ ] z_joint_upper_x4.stl
    ```

    --------------------------------------------------------------------------------

    ### LCD Module (page 82)

    #### Electronics_Compartment/LCD_Module
    #### [Electronics_Compartment/LCD_Module](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Electronics_Compartment/LCD_Module)

    ```
    [ ] [a]_mini12864_case_hinge.stl
    [ ] mini12864_case_front.stl
    [ ] mini12864_case_rear.stl
    [ ] mini12864_spacer.stl
    [ ] [a]_mini12864_case_hinge.stl
    [ ] mini12864_case_front.stl
    [ ] mini12864_case_rear.stl
    [ ] mini12864_spacer.stl
    ```

    --------------------------------------------------------------------------------

    ### Skirts (page 86)

    #### Electronics_Compartment/Plug_Panel
    #### [Electronics_Compartment/Plug_Panel](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Electronics_Compartment/Plug_Panel)

    ```
    [ ] plug_panel_filtered_mains.stl
    [ ] plug_panel_filtered_mains.stl
    ```

    #### Skirts
    #### [Skirts](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Skirts)

    ```
    [ ] [a]_60mm_fan_blank_insert.stl
    [ ] [ ] [a]_belt_guard_a_x2.stl
    [ ] [ ] [a]_belt_guard_b_x2.stl
    [ ] [ ] side_fan_support_x2.stl
    [ ] [a]_60mm_fan_blank_insert.stl
    [ ] [ ] [a]_belt_guard_a_x2.stl
    [ ] [ ] [a]_belt_guard_b_x2.stl
    [ ] [ ] side_fan_support_x2.stl
    ```

    _For 250mm frame_
    #### [250](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Skirts/250)

    _Use these skirts when printing a 250mm frame_

    ```
    [ ] [ ] front_rear_skirt_a_250_x2.stl
    [ ] [ ] front_rear_skirt_b_250_x2.stl
    [ ] [ ] side_skirt_a_250_x2.stl
    [ ] [ ] side_skirt_b_250_x2.stl
    [ ] [ ] front_rear_skirt_a_250_x2.stl
    [ ] [ ] front_rear_skirt_b_250_x2.stl
    [ ] [ ] side_skirt_a_250_x2.stl
    [ ] [ ] side_skirt_b_250_x2.stl
    ```

    _For 300mm frame_
    #### [300](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Skirts/300)

    _Use these skirts when printing a 300mm frame_

    ```
    [ ] [ ] front_rear_skirt_a_300_x2.stl
    [ ] [ ] front_rear_skirt_b_300_x2.stl
    [ ] [ ] side_skirt_a_300_x2.stl
    [ ] [ ] side_skirt_b_300_x2.stl
    [ ] [ ] front_rear_skirt_a_300_x2.stl
    [ ] [ ] front_rear_skirt_b_300_x2.stl
    [ ] [ ] side_skirt_a_300_x2.stl
    [ ] [ ] side_skirt_b_300_x2.stl
    ```

    _For 350mm frame_
    #### [350](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Skirts/350)

    _Use these skirts when printing a 350mm frame_

    ```
    [ ] [ ] front_rear_skirt_a_350_x2.stl
    [ ] [ ] front_rear_skirt_b_350_x2.stl
    [ ] [ ] side_skirt_a_350_x2.stl
    [ ] [ ] side_skirt_b_350_x2.stl
    [ ] [ ] front_rear_skirt_a_350_x2.stl
    [ ] [ ] front_rear_skirt_b_350_x2.stl
    [ ] [ ] side_skirt_a_350_x2.stl
    [ ] [ ] side_skirt_b_350_x2.stl
    ```

    --------------------------------------------------------------------------------

    ### Panels (page 94)


    #### Panel_Mounting/Front_Doors
    #### [Panel_Mounting/Front_Doors](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Panel_Mounting/Front_Doors)

    ```
    [ ] [ ] [ ] [ ] door_hinge_x4.stl
    [ ] [ ] handle_a_x2.stl
    [ ] [ ] handle_b_x2.stl
    [ ] [ ] latch_x2.stl
    [ ] [ ] [ ] [ ] door_hinge_x4.stl
    [ ] [ ] handle_a_x2.stl
    [ ] [ ] handle_b_x2.stl
    [ ] [ ] latch_x2.stl
    ```

    #### Panel_Mounting
    #### [Panel_Mounting](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Panel_Mounting)

    ```
    [ ] [ ] [ ] [ ] bottom_panel_clip_x4.stl
    [ ] [ ] bottom_panel_hinge_x2.stl
    [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] corner_panel_clip_3mm_x12.stl
    [ ] [ ] [ ] [ ] corner_panel_clip_6mm_x4.stl
    [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] midspan_panel_clip_3mm_x12.stl
    [ ] [ ] [ ] midspan_panel_clip_6mm_x3.stl
    [ ] [ ] z_belt_cover_a_x2.stl
    [ ] [ ] z_belt_cover_b_x2.stl
    [ ] [ ] [ ] [ ] bottom_panel_clip_x4.stl
    [ ] [ ] bottom_panel_hinge_x2.stl
    [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] corner_panel_clip_3mm_x12.stl
    [ ] [ ] [ ] [ ] corner_panel_clip_6mm_x4.stl
    [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] midspan_panel_clip_3mm_x12.stl
    [ ] [ ] [ ] midspan_panel_clip_6mm_x3.stl
    [ ] [ ] z_belt_cover_a_x2.stl
    [ ] [ ] z_belt_cover_b_x2.stl
    ```

    --------------------------------------------------------------------------------

    ### Spool Holder (page 102)

    #### Spool_Management
    #### [Spool_Management](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Spool_Management)

    ```
    [ ] bowen_retainer.stl
    [ ] spool_holder.stl
    [ ] bowen_retainer.stl
    [ ] spool_holder.stl
    ```

    --------------------------------------------------------------------------------

    ### Exhaust Filter (page 106)

    #### Exhaust_Filter
    #### [Exhaust_Filter](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Exhaust_Filter)

    ```
    [ ] [a]_filter_access_cover.stl
    [ ] exhaust_filter_grill.stl
    [ ] exhaust_filter_housing.stl
    [ ] [ ] exhaust_filter_mount_x2.stl
    [ ] [a]_filter_access_cover.stl
    [ ] exhaust_filter_grill.stl
    [ ] exhaust_filter_housing.stl
    [ ] [ ] exhaust_filter_mount_x2.stl
    ```

    --------------------------------------------------------------------------------

    ### Electronics Mounting (page 112)

    #### Electronics_Compartment/DIN_Brackets
    #### [Electronics_Compartment/DIN_Brackets](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets)

    _There are a number of different brackets here depending on your electronics selection._

    ```
    [ ] [ ] duet_duex_bracket_x2.stl
    [ ] lrs_psu_bracket_clip.stl
    [ ] [ ] [ ] pcb_din_clip_x3.stl
    [ ] [ ] ramps_bracket_x2.stl
    [ ] raspberrypi_bracket.stl
    [ ] rs25_psu_bracket_clip.stl
    [ ] [ ] skr_1.3_bracket_x2.stl
    [ ] [ ] skr_mini_e2_bracket_x2.stl
    [ ] [ ] skr_mini_e3_bracket_x2.stl
    [ ] [ ] duet_duex_bracket_x2.stl
    [ ] lrs_psu_bracket_clip.stl
    [ ] [ ] [ ] pcb_din_clip_x3.stl
    [ ] [ ] ramps_bracket_x2.stl
    [ ] raspberrypi_bracket.stl
    [ ] rs25_psu_bracket_clip.stl
    [ ] [ ] skr_1.3_bracket_x2.stl
    [ ] [ ] skr_mini_e2_bracket_x2.stl
    [ ] [ ] skr_mini_e3_bracket_x2.stl
    ```
  14. cmidgley revised this gist Sep 5, 2021. 1 changed file with 6 additions and 7 deletions.
    13 changes: 6 additions & 7 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -12,21 +12,20 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227

    #### Tools

    ` [ ] [ ] ` [rail_installation_guide_center_x2.stl](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Tools/rail_installation_guide_center_x2.stl)
    ```
    [ ] [ ] rail_installation_guide_center_x2.stl
    ```

    --------------------------------------------------------------------------------

    ### Z Drive Assembly (page 18)

    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    ` [ ] [ ] ` ___[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)___

    ` [ ] [ ] ` **_[[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)_**

    ` [ ] [ ] ` [[a]_z_drive_baseplate_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_z_drive_baseplate_a_x2.stl)

    ```
    [ ] [ ] [a]_belt_tensioner_a_x2.stl
    [ ] [ ] [a]_belt_tensioner_b_x2.stl
    [ ] [ ] [a]_z_drive_baseplate_a_x2.stl
    [ ] [ ] [a]_z_drive_baseplate_b_x2.stl
    [ ] [ ] z_drive_main_a_x2.stl
    [ ] [ ] z_drive_main_b_x2.stl
  15. cmidgley revised this gist Sep 5, 2021. 1 changed file with 4 additions and 6 deletions.
    10 changes: 4 additions & 6 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -12,21 +12,19 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227

    #### Tools

    ` [ ] [ ] ` [rail_installation_guide_center_x2.stl](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Tools/rail_installation_guide_center_x2.stl)
    ` [ ] [ ] ` [rail_installation_guide_center_x2.stl](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Tools/rail_installation_guide_center_x2.stl)

    --------------------------------------------------------------------------------

    ### Z Drive Assembly (page 18)

    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    - [ ] _[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_ (1 of 2)
    - [ ] (2 of 2)
    ` [ ] [ ] ` ___[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)___

    - [ ] _[[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)_ (1 of 2)
    - [ ] (2 of 2)
    ` [ ] [ ] ` **_[[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)_**

    ` [ ] [ ] ` **[[a]_z_drive_baseplate_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_z_drive_baseplate_a_x2.stl)**
    ` [ ] [ ] ` [[a]_z_drive_baseplate_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_z_drive_baseplate_a_x2.stl)

    ```
    [ ] [ ] [a]_z_drive_baseplate_b_x2.stl
  16. cmidgley revised this gist Sep 5, 2021. 1 changed file with 2 additions and 2 deletions.
    4 changes: 2 additions & 2 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -21,10 +21,10 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227
    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    - [ ] _[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_ (1 of 2)
    - [ ] (2 of 2)
    - [ ] (2 of 2)

    - [ ] _[[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)_ (1 of 2)
    - [ ] (2 of 2)
    - [ ] (2 of 2)

    ` [ ] [ ] ` **[[a]_z_drive_baseplate_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_z_drive_baseplate_a_x2.stl)**

  17. cmidgley revised this gist Sep 5, 2021. 1 changed file with 4 additions and 2 deletions.
    6 changes: 4 additions & 2 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -20,9 +20,11 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227

    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    - [ ] [ ] _[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_
    - [ ] _[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_ (1 of 2)
    - [ ] (2 of 2)

    - [ ] [ ] _[[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)_
    - [ ] _[[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)_ (1 of 2)
    - [ ] (2 of 2)

    ` [ ] [ ] ` **[[a]_z_drive_baseplate_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_z_drive_baseplate_a_x2.stl)**

  18. cmidgley revised this gist Sep 5, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -20,7 +20,7 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227

    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    - [x] [ ] _[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_
    - [ ] [ ] _[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_

    - [ ] [ ] _[[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)_

  19. cmidgley revised this gist Sep 5, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -20,7 +20,7 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227

    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    - [ ] [ ] _[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_
    - [x] [ ] _[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_

    - [ ] [ ] _[[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)_

  20. cmidgley revised this gist Sep 5, 2021. 1 changed file with 3 additions and 3 deletions.
    6 changes: 3 additions & 3 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -20,11 +20,11 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227

    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    [ ] [ ] _[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_
    - [ ] [ ] _[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_

    ` [ ] [ ] ` _[[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)_
    - [ ] [ ] _[[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)_

    ` [ ] [ ] ` *[[a]_z_drive_baseplate_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_z_drive_baseplate_a_x2.stl)*
    ` [ ] [ ] ` **[[a]_z_drive_baseplate_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_z_drive_baseplate_a_x2.stl)**

    ```
    [ ] [ ] [a]_z_drive_baseplate_b_x2.stl
  21. cmidgley revised this gist Sep 5, 2021. 1 changed file with 3 additions and 3 deletions.
    6 changes: 3 additions & 3 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -20,11 +20,11 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227

    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    ` [ ] [ ] `_[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_
    [ ] [ ] _[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_

    ` [ ] [ ] ` [[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)
    ` [ ] [ ] ` _[[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)_

    ` [ ] [ ] ` [[a]_z_drive_baseplate_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_z_drive_baseplate_a_x2.stl)
    ` [ ] [ ] ` *[[a]_z_drive_baseplate_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_z_drive_baseplate_a_x2.stl)*

    ```
    [ ] [ ] [a]_z_drive_baseplate_b_x2.stl
  22. cmidgley revised this gist Sep 5, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -20,7 +20,7 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227

    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    ` [ ] [ ] ` _[_a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_
    ` [ ] [ ] `_[[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_

    ` [ ] [ ] ` [[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)

  23. cmidgley revised this gist Sep 5, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -20,7 +20,7 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227

    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    ` [ ] [ ] ` [_[a]_belt_tensioner_a_x2.stl_](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)
    ` [ ] [ ] ` _[_a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)_

    ` [ ] [ ] ` [[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)

  24. cmidgley revised this gist Sep 5, 2021. 1 changed file with 4 additions and 4 deletions.
    8 changes: 4 additions & 4 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -12,19 +12,19 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227

    #### Tools

    ` [ ] [ ] ` [`rail_installation_guide_center_x2.stl`](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Tools/rail_installation_guide_center_x2.stl)
    ` [ ] [ ] ` [rail_installation_guide_center_x2.stl](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Tools/rail_installation_guide_center_x2.stl)

    --------------------------------------------------------------------------------

    ### Z Drive Assembly (page 18)

    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    [ ] [ ] [[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)
    ` [ ] [ ] ` [_[a]_belt_tensioner_a_x2.stl_](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)

    ` [ ] [ ] ` [`[a]_belt_tensioner_b_x2.stl`](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)
    ` [ ] [ ] ` [[a]_belt_tensioner_b_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)

    ` [ ] [ ] ` [`[a]_z_drive_baseplate_a_x2.stl`](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_z_drive_baseplate_a_x2.stl)
    ` [ ] [ ] ` [[a]_z_drive_baseplate_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_z_drive_baseplate_a_x2.stl)

    ```
    [ ] [ ] [a]_z_drive_baseplate_b_x2.stl
  25. cmidgley revised this gist Sep 5, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -20,7 +20,7 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227

    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    ` [ ] [ ] ` [`[a]_belt_tensioner_a_x2.stl`](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)
    [ ] [ ] [[a]_belt_tensioner_a_x2.stl](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)

    ` [ ] [ ] ` [`[a]_belt_tensioner_b_x2.stl`](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)

  26. cmidgley revised this gist Sep 5, 2021. 1 changed file with 3 additions and 0 deletions.
    3 changes: 3 additions & 0 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -21,8 +21,11 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227
    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    ` [ ] [ ] ` [`[a]_belt_tensioner_a_x2.stl`](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)

    ` [ ] [ ] ` [`[a]_belt_tensioner_b_x2.stl`](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)

    ` [ ] [ ] ` [`[a]_z_drive_baseplate_a_x2.stl`](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_z_drive_baseplate_a_x2.stl)

    ```
    [ ] [ ] [a]_z_drive_baseplate_b_x2.stl
    [ ] [ ] z_drive_main_a_x2.stl
  27. cmidgley revised this gist Sep 5, 2021. 1 changed file with 2 additions and 2 deletions.
    4 changes: 2 additions & 2 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -21,9 +21,9 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227
    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    ` [ ] [ ] ` [`[a]_belt_tensioner_a_x2.stl`](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)
    ` [ ] [ ] ` [`[a]_belt_tensioner_b_x2.stl`](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_b_x2.stl)
    ` [ ] [ ] ` [`[a]_z_drive_baseplate_a_x2.stl`](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_z_drive_baseplate_a_x2.stl)
    ```
    [ ] [ ] [a]_belt_tensioner_b_x2.stl
    [ ] [ ] [a]_z_drive_baseplate_a_x2.stl
    [ ] [ ] [a]_z_drive_baseplate_b_x2.stl
    [ ] [ ] z_drive_main_a_x2.stl
    [ ] [ ] z_drive_main_b_x2.stl
  28. cmidgley revised this gist Sep 5, 2021. 1 changed file with 3 additions and 5 deletions.
    8 changes: 3 additions & 5 deletions voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -12,18 +12,16 @@ _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e1227

    #### Tools

    ```
    [ ] [ ] rail_installation_guide_center_x2.stl
    ```
    ` [ ] [ ] ` [`rail_installation_guide_center_x2.stl`](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Tools/rail_installation_guide_center_x2.stl)

    --------------------------------------------------------------------------------

    ### Z Drive Assembly (page 18)

    #### Z_Drive
    #### [Z_Drive](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive)

    ` [ ] [ ] ` [`[a]_belt_tensioner_a_x2.stl`](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Z_Drive/[a]_belt_tensioner_a_x2.stl)
    ```
    [ ] [ ] [a]_belt_tensioner_a_x2.stl
    [ ] [ ] [a]_belt_tensioner_b_x2.stl
    [ ] [ ] [a]_z_drive_baseplate_a_x2.stl
    [ ] [ ] [a]_z_drive_baseplate_b_x2.stl
  29. cmidgley revised this gist Sep 5, 2021. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -2,7 +2,7 @@

    List of parts to print for [Voron 2.4](https://github.com/VoronDesign/Voron-2) organized by the [Assembly Manuals](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/Docs/2.4_Assembly_Manual.pdf) order of assembly, allowing for just-in-time printing of parts while building the printer. Configuration is standard Voron 2.4 (Afterburner Direct Feed, DIN rail mounts) with choices for E3D, Dragon or Mosquito hot ends on a 250mm, 300mm or 350mm frame. No parts for the drag chain are included, as usually these are purchased parts rather than printed.

    Names of the sections (such as `Tools`) match the name of the [STL directory](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4) that contains the prints. Voron Design has recommendations for primary vs. accent colors (accent colors have filenames starting with `[a]`), and those with accent are highlighted in *bold* below.
    Names of the sections (such as `Tools`) match the name of the [STL directory](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4) that contains the prints. Voron Design has recommendations for primary vs. accent colors (accent colors have filenames starting with `[a]`).

    _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e122705c9ac6bb21) for making a Gist of all parts. This Gist is a modified version of that list, organized by order of assembly and removed parts that don't need printing._

  30. cmidgley revised this gist Sep 5, 2021. 1 changed file with 3 additions and 1 deletion.
    4 changes: 3 additions & 1 deletion voron_24_printed_parts.md
    View file
    Original file line number Diff line number Diff line change
    @@ -1,6 +1,8 @@
    ### Voron 2.4 Printed Parts List

    List of parts to print for [Voron 2.4](https://github.com/VoronDesign/Voron-2) organized by order of assembly following the [manual](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/Docs/2.4_Assembly_Manual.pdf), allowing for just-in-time printing of parts while building the printer. Configuration is per the manual (Afterburner Direct Feed, DIN rail mounts) with choices for E3D, Dragon or Mosquito hot ends on a 250mm, 300mm or 350mm frame.
    List of parts to print for [Voron 2.4](https://github.com/VoronDesign/Voron-2) organized by the [Assembly Manuals](https://github.com/VoronDesign/Voron-2/blob/Voron2.4/Docs/2.4_Assembly_Manual.pdf) order of assembly, allowing for just-in-time printing of parts while building the printer. Configuration is standard Voron 2.4 (Afterburner Direct Feed, DIN rail mounts) with choices for E3D, Dragon or Mosquito hot ends on a 250mm, 300mm or 350mm frame. No parts for the drag chain are included, as usually these are purchased parts rather than printed.

    Names of the sections (such as `Tools`) match the name of the [STL directory](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4) that contains the prints. Voron Design has recommendations for primary vs. accent colors (accent colors have filenames starting with `[a]`), and those with accent are highlighted in *bold* below.

    _Credit to [krobertson](https://gist.github.com/krobertson/adfd96689e8b66e7e122705c9ac6bb21) for making a Gist of all parts. This Gist is a modified version of that list, organized by order of assembly and removed parts that don't need printing._