Skip to content

Instantly share code, notes, and snippets.

@ddewaele
Last active October 30, 2017 19:19
Show Gist options
  • Select an option

  • Save ddewaele/5cc02bf20d9e999c3e7e0fc5d76fba3d to your computer and use it in GitHub Desktop.

Select an option

Save ddewaele/5cc02bf20d9e999c3e7e0fc5d76fba3d to your computer and use it in GitHub Desktop.

Revisions

  1. ddewaele revised this gist Oct 30, 2017. 1 changed file with 30 additions and 0 deletions.
    30 changes: 30 additions & 0 deletions multitech-output.txt
    Original file line number Diff line number Diff line change
    @@ -1,3 +1,13 @@
    Files are on my mac tftp server

    ls -ltr /private/tftpboot/oe_rootfs.jffs2
    -rwxrwxrwx 1 root wheel 65788832 Oct 30 19:46 /private/tftpboot/oe_rootfs.jffs2

    ls -ltr /private/tftpboot/oe_uImage.bin
    -rwxrwxrwx 1 root wheel 2801179 Oct 30 19:46 /private/tftpboot/oe_uImage.bin

    Setting uboot variables via sample script (http://git.multitech.net/cgi-bin/cgit.cgi/meta-multitech.git/plain/contrib/uboot-setenv-mtcdt.minicom)

    U-Boot> setting U-Boot variables...
    saving...
    printenv
    @@ -63,6 +73,9 @@ uboot_file=oe_u-boot.bin
    uboot_size=0x00080000

    Environment size: 2625/131067 bytes

    Executing the update via run krb:

    U-Boot> run krb
    macb0: PHY present at 0
    macb0: link up, 100Mbps full-duplex (lpa: 0xcde1)
    @@ -76,7 +89,12 @@ Loading: #################################################################
    done
    Bytes transferred = 2801179 (2abe1b hex)

    Got an error :

    NAND erase.part: unexpected character ' ' at the end of partition

    Hitting enter got it to continue

    U-Boot>
    macb0: PHY present at 0
    macb0: link up, 100Mbps full-duplex (lpa: 0xcde1)
    @@ -882,3 +900,15 @@ usage: /sbin/set-modem-diversity <device> <radio-code> <enabled>
    Oct 30 19:35:36 mtcdt auth.err getty[729]: can't open '/dev/ttyGS0': No such file or directory^M
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found



    But still lots of errors in the console and an incomplete FS ?

    Filesystem Size Used Available Use% Mounted on
    /dev/root 232.0M 39.6M 192.4M 17% /
    devtmpfs 124.2M 4.0K 124.2M 0% /dev
    tmpfs 124.2M 0 124.2M 0% /run
    tmpfs 124.2M 4.0K 124.2M 0% /var/volatile
    /dev/mtdblock6 8.0M 544.0K 7.5M 7% /var/config
    /dev/mtdblock7 8.0M 512.0K 7.5M 6% /var/oem
  2. ddewaele created this gist Oct 30, 2017.
    884 changes: 884 additions & 0 deletions multitech-output.txt
    Original file line number Diff line number Diff line change
    @@ -0,0 +1,884 @@
    U-Boot> setting U-Boot variables...
    saving...
    printenv
    baudrate=115200
    bootargs=mem=256M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2
    bootcmd=nboot.jffs2 ${loadaddr} 0 ${kernel_addr} && bootm ${loadaddr}
    bootdelay=1
    bootstrap_addr=0x00000000
    bootstrap_file=oe_bootstrap_pmecc_padded.bin
    bootstrap_size=0x00040000
    config_addr=0x00800000
    config_file=oe_config.tar.gz
    config_size=0x00800000
    erase_bootstrap=nand erase.part bootstrap
    erase_config=nand erase.part config
    erase_kernel=nand erase.part kernel
    erase_oem=nand erase.part oem
    erase_rootfs=nand erase.part rootfs
    erase_uboot=nand erase.part u-boot
    erase_uboot_env1=nand erase.part u-boot-env1
    erase_uboot_env2=nand erase.part u-boot-env2
    ethact=macb0
    ethaddr=00:08:00:4a:24:8f
    fileaddr=20000000
    filesize=2ABE1B
    hostname=AT91SAM9G25
    ipaddr=192.168.2.1
    kernel_addr=0x00200000
    kernel_file=oe_uImage.bin
    kernel_size=0x00600000
    krb=run tftp_kernel && run tftp_rootfs && boot
    loadaddr=0x22000000
    mtdids=nand0=nand0
    mtdparts=mtdparts=nand0:256k(bootstrap),512k(u-boot),640k(u-boot-env1),640k(u-boot-env2),6M(kernel) ,8M(config),8M(oem),-(rootfs)
    netmask=255.255.255.0
    oem_addr=0x01000000
    oem_file=oe_oem.tar.gz
    oem_size=0x00800000
    rb=run tftp_rootfs && boot
    rootfs_addr=0x01800000
    rootfs_file=oe_rootfs.jffs2
    serverip=192.168.2.2
    stderr=serial
    stdin=serial
    stdout=serial
    tftp_bootstrap=tftpb ${tftpaddr} ${bootstrap_file} && run erase_bootstrap && nand write.jffs2 ${fileaddr} bootstrap ${filesize}
    tftp_config=tftpb ${tftpaddr} ${config_file} && run erase_config && nand write.jffs2 ${fileaddr} config ${filesize}
    tftp_kernel=tftpb ${tftpaddr} ${kernel_file} && run erase_kernel && nand write.jffs2 ${fileaddr} kernel ${filesize}
    tftp_oem=tftpb ${tftpaddr} ${oem_file} && run erase_oem && nand write.jffs2 ${fileaddr} oem ${filesize}
    tftp_rootfs=tftpb ${tftpaddr} ${rootfs_file} && run erase_rootfs && nand write.jffs2 ${fileaddr} rootfs ${filesize}
    tftp_uboot=tftpb ${tftpaddr} ${uboot_file} && run erase_uboot && nand write.jffs2 ${fileaddr} u-boot ${filesize}
    tftp_uboot_env1=tftpb ${tftpaddr} ${uboot_env1_file} && run erase_uboot_env1 && nand write.jffs2 ${fileaddr} u-boot-env1 ${filesize}
    tftp_uboot_env2=tftpb ${tftpaddr} ${uboot_env2_file} && run erase_uboot_env2 && nand write.jffs2 ${fileaddr} u-boot-env2 ${filesize}
    tftpaddr=0x20000000
    uboot_addr=0x00040000
    uboot_env1_addr=0x000C0000
    uboot_env1_file=oe_uboot_env1.bin
    uboot_env1_size=0x000A0000
    uboot_env2_addr=0x00160000
    uboot_env2_file=oe_uboot_env2.bin
    uboot_env2_size=0x000A0000
    uboot_file=oe_u-boot.bin
    uboot_size=0x00080000

    Environment size: 2625/131067 bytes
    U-Boot> run krb
    macb0: PHY present at 0
    macb0: link up, 100Mbps full-duplex (lpa: 0xcde1)
    Using macb0 device
    TFTP from server 192.168.2.2; our IP address is 192.168.2.1
    Filename 'oe_uImage.bin'.
    Load address: 0x20000000
    Loading: #################################################################
    #################################################################
    #############################################################
    done
    Bytes transferred = 2801179 (2abe1b hex)

    NAND erase.part: unexpected character ' ' at the end of partition
    U-Boot>
    macb0: PHY present at 0
    macb0: link up, 100Mbps full-duplex (lpa: 0xcde1)
    Using macb0 device
    TFTP from server 192.168.2.2; our IP address is 192.168.2.1
    Filename 'oe_uImage.bin'.
    Load address: 0x20000000
    Loading: #################################################################
    #################################################################
    #############################################################
    done
    Bytes transferred = 2801179 (2abe1b hex)
    macb0: PHY present at 0
    macb0: link up, 100Mbps full-duplex (lpa: 0xcde1)
    Using macb0 device
    TFTP from server 192.168.2.2; our IP address is 192.168.2.1
    Filename 'oe_rootfs.jffs2'.
    Load address: 0x20000000
    Loading: #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    ##############################################################
    done
    Bytes transferred = 65788832 (3ebdba0 hex)

    Loading from nand0, offset 0x200000
    Image Name: mLinux/3.12.27/mtcdt
    Image Type: ARM Linux Kernel Image (uncompressed)
    Data Size: 2801115 Bytes = 2.7 MiB
    Load Address: 20008000
    Entry Point: 20008000
    ## Booting kernel from Legacy Image at 22000000 ...
    Image Name: mLinux/3.12.27/mtcdt
    Image Type: ARM Linux Kernel Image (uncompressed)
    Data Size: 2801115 Bytes = 2.7 MiB
    Load Address: 20008000
    Entry Point: 20008000
    Verifying Checksum ... OK
    Loading Kernel Image ... OK
    OK

    Starting kernel ...

    Uncompressing Linux... done, booting the kernel.
    Booting Linux on physical CPU 0x0
    Linux version 3.12.27 (jenkins@frylock) (gcc version 4.8.2 (GCC) ) #1 Wed Jun 3 12:07:18 CDT 2015
    Machine: Atmel AT91SAM (Device Tree), model: Multi-Tech Systems MTCDT
    AT91: Detected soc type: at91sam9x5
    AT91: Detected soc subtype: at91sam9g25
    AT91: sram at 0x300000 of 0x8000 mapped at 0xfef70000
    Kernel command line: mem=256M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
    lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
    modules : 0xbf000000 - 0xc0000000 ( 16 MB)
    .text : 0xc0008000 - 0xc04ef50c (5022 kB)
    .init : 0xc04f0000 - 0xc0517cbc ( 160 kB)
    .data : 0xc0518000 - 0xc05407a0 ( 162 kB)
    .bss : 0xc05407a0 - 0xc055f408 ( 124 kB)
    NR_IRQS:16 nr_irqs:16 16
    sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
    Calibrating delay loop... 199.06 BogoMIPS (lpj=995328)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 512
    Initializing cgroup subsys blkio
    CPU: Testing write buffer coherency: ok
    Setting up static identity map for 0xc03a9b70 - 0xc03a9bc8
    devtmpfs: initialized
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    AT91: Power Management (with slow clock mode)
    AT91: Starting after software reset
    gpio-at91 fffff400.gpio: at address fefff400
    gpio-at91 fffff600.gpio: at address fefff600
    gpio-at91 fffff800.gpio: at address fefff800
    gpio-at91 fffffa00.gpio: at address fefffa00
    pinctrl-at91 pinctrl.2: initialized AT91 pinctrl driver
    bio: create slab <bio-0> at 0
    at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
    at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    i2c-gpio i2c.3: using pins 30 (SDA) and 31 (SCL)
    i2c-gpio i2c.4: using pins 64 (SDA) and 65 (SCL)
    Switched to clocksource tcb_clksrc
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    TCP: reno registered
    UDP hash table entries: 256 (order: 0, 4096 bytes)
    UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    NFS: Registering the id_resolver key type
    Key type id_resolver registered
    Key type id_legacy registered
    jffs2: version 2.2. (NAND) (SUMMARY) ?? 2001-2006 Red Hat, Inc.
    ROMFS MTD (C) 2007 Red Hat, Inc.
    msgmni has been set to 496
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    io scheduler noop registered (default)
    io scheduler deadline registered
    io scheduler cfq registered
    fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL
    console [ttyS0] enabled
    f8040000.serial: ttyS1 at MMIO 0xf8040000 (irq = 26, base_baud = 8333333) is a ATMEL_SERIAL
    brd: module loaded
    loop: module loaded
    at24_get_setup: found a match for eeprom at 56
    at24 0-0056: 512 byte 24c04 EEPROM, writable, 16 bytes/write
    sam9x5: read 512 bytes from id eeprom
    at24_get_setup: found a match for eeprom at 50
    at24 1-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
    sam9x5: ap1 eeprom read failed: -110
    at24_get_setup: found a match for eeprom at 52
    at24 1-0052: 512 byte 24c04 EEPROM, writable, 16 bytes/write
    sam9x5: read 512 bytes from ap2 eeprom
    atmel_nand 40000000.nand: Using dma0chan0 for DMA transfers.
    ONFI param page 0 valid
    ONFI flash detected
    NAND device: Manufacturer ID: 0x2c, Chip ID: 0xaa (Micron MT29F2G08ABBEAHC), 256MiB, page size: 2048, OOB size: 64
    atmel_nand 40000000.nand: ONFI params, minimum required ECC: 4 bits in 512 bytes
    atmel_nand 40000000.nand: Initialize PMECC params, cap: 4, sector: 512
    Scanning device for bad blocks
    9 ofpart partitions found on MTD device atmel_nand
    Creating 9 MTD partitions on "atmel_nand":
    0x000000000000-0x000010000000 : "NANDFlash"
    0x000000000000-0x000000040000 : "at91bootstrap"
    0x000000040000-0x0000000c0000 : "u-Boot"
    0x0000000c0000-0x000000160000 : "u-Boot Config"
    0x000000160000-0x000000200000 : "u-Boot Redundant Config"
    0x000000200000-0x000000800000 : "uImage"
    0x000000800000-0x000001000000 : "Config"
    0x000001000000-0x000001800000 : "OEM Config"
    0x000001800000-0x000010000000 : "Rootfs"
    libphy: MACB_mii_bus: probed
    macb f802c000.ethernet eth0: Cadence MACB at 0xf802c000 irq 23 (00:08:00:4a:24:8f)
    macb f802c000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=f802c000.etherne:00, irq=-1)
    PPP generic driver version 2.4.2
    PPP BSD Compression module registered
    PPP Deflate Compression module registered
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-atmel: EHCI Atmel driver
    atmel-ehci 700000.ehci: EHCI Host Controller
    atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1
    atmel-ehci 700000.ehci: irq 31, io mem 0x00700000
    atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 3.12.27 ehci_hcd
    usb usb1: SerialNumber: 700000.ehci
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 3 ports detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    at91_ohci 600000.ohci: AT91 OHCI
    at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2
    at91_ohci 600000.ohci: irq 31, io mem 0x00600000
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: AT91 OHCI
    usb usb2: Manufacturer: Linux 3.12.27 ohci_hcd
    usb usb2: SerialNumber: at91
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    rtc (null): invalid alarm value: 1900-1-1 0:0:0
    at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0
    at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver.
    i2c /dev entries driver
    at91sam9_wdt: enabled (heartbeat=15 sec, nowayout=0)
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (3973 buckets, 15892 max)
    ipip: IPv4 over IPv4 tunneling driver
    gre: GRE over IPv4 demultiplexor driver
    ip_gre: GRE over IPv4 tunneling driver
    ip_tables: (C) 2000-2006 Netfilter Core Team
    TCP: cubic registered
    NET: Registered protocol family 17
    l2tp_core: L2TP core driver, V2.0
    Key type dns_resolver registered
    at91_rtc fffffeb0.rtc: setting system clock to 2017-10-30 19:34:10 UTC (1509392050)
    usb 1-2: new high-speed USB device number 2 using atmel-ehci
    usb 1-2: New USB device found, idVendor=0424, idProduct=2534
    usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    hub 1-2:1.0: USB hub found
    hub 1-2:1.0: 4 ports detected
    usb 2-3: new full-speed USB device number 2 using at91_ohci
    usb 2-3: New USB device found, idVendor=04e2, idProduct=1412
    usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    usb 1-2.2: new high-speed USB device number 3 using atmel-ehci
    usb 1-2.2: New USB device found, idVendor=0403, idProduct=6014
    usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-2.2: Product: Single RS232-HS
    usb 1-2.2: Manufacturer: FTDI
    usb 1-2.3: new high-speed USB device number 4 using atmel-ehci
    usb 1-2.3: New USB device found, idVendor=1bc7, idProduct=0021
    usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    usb 1-2.3: Product: 6 CDC-ACM
    usb 1-2.3: Manufacturer: Telit
    usb 1-2.3: SerialNumber: 356136077615161
    jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    VFS: Mounted root (jffs2 filesystem) readonly on device 31:8.
    devtmpfs: mounted
    Freeing unused kernel memory: 156K (c04f0000 - c0517000)
    INIT: version 2.88 booting
    jffs2: notice: (73) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    jffs2: notice: (73) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    Starting udev
    /lib/udev/udevd: error while loading shared libraries: libkmod.so.2: cannot open shared object file: No such file or directory
    /etc/rcS.d/S04udev: line 103: udevadm: command not found
    /etc/rcS.d/S04udev: line 110: udevadm: command not found
    /etc/rcS.d/S04udev: line 111: udevadm: command not found
    /etc/rcS.d/S04udev: line 111: udevadm: command not found
    Starting Bootlog daemon: bootlogd.
    urandom start: failed.
    /var/config already mounted
    /var/oem already mounted
    /etc/rcS.d/S37populate-volatile.sh: line 215: sort: command not found
    /etc/rcS.d/S38dmesg.sh: line 17: /var/log/dmesg: No such file or directory
    Loading mts-io module
    [INFO] mts-io:mts_io_init:823: init: v1.1.1
    [INFO] mts-io:mts_id_eeprom_load:748: detected board MTCDT-0.0
    [INFO] mts-io:mts_id_eeprom_load:751: sizeof: 512
    [INFO] mts-io:mts_id_eeprom_load:752: vendor-id: Multi-Tech Systems
    [INFO] mts-io:mts_id_eeprom_load:753: product-id: MTCDT-H5-210L
    [INFO] mts-io:mts_id_eeprom_load:754: device-id: 19276775
    [INFO] mts-io:mts_id_eeprom_load:755: hw-version: MTCDT-0.0
    [INFO] mts-io:mts_id_eeprom_load:762: mac-addr: 00:08:00:4A:24:8F
    [INFO] mts-io:mts_id_eeprom_load:764: imei: 356136077615161
    [INFO] mts-io:mts_id_eeprom_load:765: capa-gps: no
    [INFO] mts-io:mts_id_eeprom_load:766: capa-din: no
    [INFO] mts-io:mts_id_eeprom_load:767: capa-dout: no
    [INFO] mts-io:mts_id_eeprom_load:768: capa-adc: no
    [INFO] mts-io:mts_id_eeprom_load:769: capa-wifi: no
    [INFO] mts-io:mts_id_eeprom_load:770: capa-bluetooth: no
    [INFO] mts-io:mts_id_eeprom_load:794: uuid: E9F71B0BCBF9A385DDCD96D395EE291B
    [INFO] mts-io:load_port:647: no accessory card inserted in port 1
    [INFO] mts-io:load_port:682: accessory card 2 vendor-id: Multi-Tech Systems
    [INFO] mts-io:load_port:683: accessory card 2 product-id: MTAC-LORA-868
    [INFO] mts-io:load_port:684: accessory card 2 device-id: 19228852
    [INFO] mts-io:load_port:685: accessory card 2 hw-version: MTAC-LORA-1.0
    [INFO] mts-io:load_port:706: accessory card 2 eui: 00:80:00:00:A0:00:10:E6
    [INFO] mts-io:lora_setup:42: loading LORA accessory card in port 2
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    INIT: Entering runlevel: 5
    Configuring network interfaces... run-parts: /etc/network/if-up.d/ntpdate-sync: No such file or directory
    run-parts: /etc/network/if-up.d/ntpdate-sync: No such file or directory
    done.
    dbus-uuidgen: error while loading shared libraries: libdbus-1.so.3: cannot open shared object file: No such file or directory
    Starting system message bus: /usr/bin/dbus-daemon: error while loading shared libraries: libexpat.so.1: cannot open shared object file: No such file or directory
    dbus.
    Starting syslogd/klogd: Oct 30 19:34:20 mtcdt syslog.info syslogd started: BusyBox v1.22.1
    done
    Oct 30 19:34:20 mtcdt user.notice kernel: klogd started: BusyBox v1.22.1 (2015-06-03 12:57:33 CDT)
    Oct 30 19:34:20 mtcdt user.info kernel: AT91: sram at 0x300000 of 0x8000 mapped at 0xfef70000
    Oct 30 19:34:20 mtcdt user.debug kernel: On node 0 totalpages: 65536
    Oct 30 19:34:20 mtcdt user.debug kernel: free_area_init_node: node 0, pgdat c0540074, node_mem_map c0560000
    Oct 30 19:34:20 mtcdt user.debug kernel: Normal zone: 512 pages used for memmap
    Oct 30 19:34:20 mtcdt user.debug kernel: Normal zone: 0 pages reserved
    Oct 30 19:34:20 mtcdt user.debug kernel: Normal zone: 65536 pages, LIFO batch:15
    Oct 30 19:34:20 mtcdt user.debug kernel: Clocks: CPU 400 MHz, master 133 MHz, main 12.000 MHz
    Oct 30 19:34:20 mtcdt user.debug kernel: pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
    Oct 30 19:34:20 mtcdt user.debug kernel: pcpu-alloc: [0] 0
    Oct 30 19:34:20 mtcdt user.debug kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
    Oct 30 19:34:20 mtcdt user.notice kernel: Kernel command line: mem=256M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2
    Oct 30 19:34:20 mtcdt user.info kernel: PID hash table entries: 1024 (order: 0, 4096 bytes)
    Oct 30 19:34:20 mtcdt user.info kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Oct 30 19:34:20 mtcdt user.info kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Oct 30 19:34:20 mtcdt user.debug kernel: Memory: 254288K/262144K available (3860K kernel code, 161K rwdata, 1160K rodata, 159K init, 123K bss, 7856K reserved)
    Oct 30 19:34:20 mtcdt user.notice kernel: Virtual kernel memory layout:
    Oct 30 19:34:20 mtcdt user.notice kernel: vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    Oct 30 19:34:20 mtcdt user.notice kernel: fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    Oct 30 19:34:20 mtcdt user.notice kernel: vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
    Oct 30 19:34:20 mtcdt user.notice kernel: lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
    Oct 30 19:34:20 mtcdt user.notice kernel: modules : 0xbf000000 - 0xc0000000 ( 16 MB)
    Oct 30 19:34:20 mtcdt user.notice kernel: .text : 0xc0008000 - 0xc04ef50c (5022 kB)
    Oct 30 19:34:20 mtcdt user.notice kernel: .init : 0xc04f0000 - 0xc0517cbc ( 160 kB)
    Oct 30 19:34:20 mtcdt user.notice kernel: .data : 0xc0518000 - 0xc05407a0 ( 162 kB)
    Oct 30 19:34:20 mtcdt user.notice kernel: .bss : 0xc05407a0 - 0xc055f408 ( 124 kB)
    Oct 30 19:34:20 mtcdt user.info kernel: NR_IRQS:16 nr_irqs:16 16
    Oct 30 19:34:20 mtcdt user.info kernel: sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
    Oct 30 19:34:20 mtcdt user.info kernel: Calibrating delay loop... 199.06 BogoMIPS (lpj=995328)
    Oct 30 19:34:20 mtcdt user.info kernel: pid_max: default: 32768 minimum: 301
    Oct 30 19:34:20 mtcdt user.info kernel: Mount-cache hash table entries: 512
    Oct 30 19:34:20 mtcdt user.info kernel: Initializing cgroup subsys blkio
    Oct 30 19:34:20 mtcdt user.info kernel: CPU: Testing write buffer coherency: ok
    Oct 30 19:34:20 mtcdt user.info kernel: Setting up static identity map for 0xc03a9b70 - 0xc03a9bc8
    Oct 30 19:34:20 mtcdt user.info kernel: devtmpfs: initialized
    Oct 30 19:34:20 mtcdt user.info kernel: pinctrl core: initialized pinctrl subsystem
    Oct 30 19:34:20 mtcdt user.info kernel: NET: Registered protocol family 16
    Oct 30 19:34:20 mtcdt user.info kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
    Oct 30 19:34:20 mtcdt user.info kernel: AT91: Power Management (with slow clock mode)
    Oct 30 19:34:20 mtcdt user.info kernel: AT91: Starting after software reset
    Oct 30 19:34:20 mtcdt user.info kernel: gpio-at91 fffff400.gpio: at address fefff400
    Oct 30 19:34:20 mtcdt user.info kernel: gpio-at91 fffff600.gpio: at address fefff600
    Oct 30 19:34:20 mtcdt user.info kernel: gpio-at91 fffff800.gpio: at address fefff800
    Oct 30 19:34:20 mtcdt user.info kernel: gpio-at91 fffffa00.gpio: at address fefffa00
    Oct 30 19:34:20 mtcdt user.info kernel: pinctrl-at91 pinctrl.2: initialized AT91 pinctrl driver
    Oct 30 19:34:20 mtcdt user.debug kernel: tcb_clksrc: tc0 at 16.166 MHz
    Oct 30 19:34:20 mtcdt user.info kernel: bio: create slab <bio-0> at 0
    Oct 30 19:34:20 mtcdt user.info kernel: at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
    Oct 30 19:34:20 mtcdt user.info kernel: at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
    Oct 30 19:34:20 mtcdt user.notice kernel: SCSI subsystem initialized
    Oct 30 19:34:20 mtcdt user.info kernel: usbcore: registered new interface driver usbfs
    Oct 30 19:34:20 mtcdt user.info kernel: usbcore: registered new interface driver hub
    Oct 30 19:34:20 mtcdt user.info kernel: usbcore: registered new device driver usb
    Oct 30 19:34:20 mtcdt user.info kernel: i2c-gpio i2c.3: using pins 30 (SDA) and 31 (SCL)
    Oct 30 19:34:20 mtcdt user.info kernel: i2c-gpio i2c.4: using pins 64 (SDA) and 65 (SCL)
    Oct 30 19:34:20 mtcdt user.info kernel: Switched to clocksource tcb_clksrc
    Oct 30 19:34:20 mtcdt user.info kernel: NET: Registered protocol family 2
    Oct 30 19:34:20 mtcdt user.info kernel: TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    Oct 30 19:34:20 mtcdt user.info kernel: TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
    Oct 30 19:34:20 mtcdt user.info kernel: TCP: Hash tables configured (established 2048 bind 2048)
    Oct 30 19:34:20 mtcdt user.info kernel: TCP: reno registered
    Oct 30 19:34:20 mtcdt user.info kernel: UDP hash table entries: 256 (order: 0, 4096 bytes)
    Oct 30 19:34:20 mtcdt user.info kernel: UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    Oct 30 19:34:20 mtcdt user.info kernel: NET: Registered protocol family 1
    Oct 30 19:34:20 mtcdt user.info kernel: RPC: Registered named UNIX socket transport module.
    Oct 30 19:34:20 mtcdt user.info kernel: RPC: Registeredmacb f802c000.ethernet eth0: link up (100/Full)
    udp transport module.
    Oct 30 19:34:20 mtcdt user.info kernel: RPC: Registered tcp transport module.
    Oct 30 19:34:20 mtcdt user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
    Oct 30 19:34:20 mtcdt user.notice kernel: NFS: Registering the id_resolver key type
    Oct 30 19:34:20 mtcdt user.notice kernel: Key type id_resolver registered
    Oct 30 19:34:20 mtcdt user.notice kernel: Key type id_legacy registered
    Oct 30 19:34:20 mtcdt user.info kernel: jffs2: version 2.2. (NAND) (SUMMARY) ?? 2001-2006 Red Hat, Inc.
    Oct 30 19:34:20 mtcdt user.info kernel: ROMFS MTD (C) 2007 Red Hat, Inc.
    Oct 30 19:34:20 mtcdt user.info kernel: msgmni has been set to 496
    Oct 30 19:34:20 mtcdt user.info kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Oct 30 19:34:20 mtcdt user.info kernel: io scheduler noop registered (default)
    Oct 30 19:34:20 mtcdt user.info kernel: io scheduler deadline registered
    Oct 30 19:34:20 mtcdt user.info kernel: io scheduler cfq registered
    Oct 30 19:34:20 mtcdt user.info kernel: fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL
    Oct 30 19:34:20 mtcdt user.info kernel: console [ttyS0] enabled
    Oct 30 19:34:20 mtcdt user.info kernel: f8040000.serial: ttyS1 at MMIO 0xf8040000 (irq = 26, base_baud = 8333333) is a ATMEL_SERIAL
    Oct 30 19:34:20 mtcdt user.info kernel: brd: module loaded
    Oct 30 19:34:20 mtcdt user.info kernel: loop: module loaded
    Oct 30 19:34:20 mtcdt user.info kernel: at24_get_setup: found a match for eeprom at 56
    Oct 30 19:34:20 mtcdt user.info kernel: at24 0-0056: 512 byte 24c04 EEPROM, writable, 16 bytes/write
    Oct 30 19:34:20 mtcdt user.info kernel: sam9x5: read 512 bytes from id eeprom
    Oct 30 19:34:20 mtcdt user.info kernel: at24_get_setup: found a match for eeprom at 50
    Oct 30 19:34:20 mtcdt user.info kernel: at24 1-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
    Oct 30 19:34:20 mtcdt user.info kernel: sam9x5: ap1 eeprom read failed: -110
    Oct 30 19:34:20 mtcdt user.info kernel: at24_get_setup: found a match for eeprom at 52
    Oct 30 19:34:20 mtcdt user.info kernel: at24 1-0052: 512 byte 24c04 EEPROM, writable, 16 bytes/write
    Oct 30 19:34:20 mtcdt user.info kernel: sam9x5: read 512 bytes from ap2 eeprom
    Oct 30 19:34:20 mtcdt user.info kernel: atmel_nand 40000000.nand: Using dma0chan0 for DMA transfers.
    Oct 30 19:34:20 mtcdt user.info kernel: ONFI param page 0 valid
    Oct 30 19:34:20 mtcdt user.info kernel: ONFI flash detected
    Oct 30 19:34:20 mtcdt user.info kernel: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xaa (Micron MT29F2G08ABBEAHC), 256MiB, page size: 2048, OOB size: 64
    Oct 30 19:34:20 mtcdt user.info kernel: atmel_nand 40000000.nand: ONFI params, minimum required ECC: 4 bits in 512 bytes
    Oct 30 19:34:20 mtcdt user.info kernel: atmel_nand 40000000.nand: Initialize PMECC params, cap: 4, sector: 512
    Oct 30 19:34:20 mtcdt user.info kernel: Scanning device for bad blocks
    Oct 30 19:34:20 mtcdt user.notice kernel: 9 ofpart partitions found on MTD device atmel_nand
    Oct 30 19:34:20 mtcdt user.notice kernel: Creating 9 MTD partitions on "atmel_nand":
    Oct 30 19:34:20 mtcdt user.notice kernel: 0x000000000000-0x000010000000 : "NANDFlash"
    Oct 30 19:34:20 mtcdt user.notice kernel: 0x000000000000-0x000000040000 : "at91bootstrap"
    Oct 30 19:34:20 mtcdt user.notice kernel: 0x000000040000-0x0000000c0000 : "u-Boot"
    Oct 30 19:34:20 mtcdt user.notice kernel: 0x0000000c0000-0x000000160000 : "u-Boot Config"
    Oct 30 19:34:20 mtcdt user.notice kernel: 0x000000160000-0x000000200000 : "u-Boot Redundant Config"
    Oct 30 19:34:20 mtcdt user.notice kernel: 0x000000200000-0x000000800000 : "uImage"
    Oct 30 19:34:20 mtcdt user.notice kernel: 0x000000800000-0x000001000000 : "Config"
    Oct 30 19:34:20 mtcdt user.notice kernel: 0x000001000000-0x000001800000 : "OEM Config"
    Oct 30 19:34:20 mtcdt user.notice kernel: 0x000001800000-0x000010000000 : "Rootfs"
    Oct 30 19:34:20 mtcdt user.info kernel: libphy: MACB_mii_bus: probed
    Oct 30 19:34:20 mtcdt user.info kernel: macb f802c000.ethernet eth0: Cadence MACB at 0xf802c000 irq 23 (00:08:00:4a:24:8f)
    Oct 30 19:34:20 mtcdt user.info kernel: macb f802c000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=f802c000.etherne:00, irq=-1)
    Oct 30 19:34:20 mtcdt user.info kernel: PPP generic driver version 2.4.2
    Oct 30 19:34:20 mtcdt user.info kernel: PPP BSD Compression module registered
    Oct 30 19:34:20 mtcdt user.info kernel: PPP Deflate Compression module registered
    Oct 30 19:34:20 mtcdt user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Oct 30 19:34:20 mtcdt user.info kernel: ehci-atmel: EHCI Atmel driver
    Oct 30 19:34:20 mtcdt user.info kernel: atmel-ehci 700000.ehci: EHCI Host Controller
    Oct 30 19:34:20 mtcdt user.info kernel: atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1
    Oct 30 19:34:20 mtcdt user.info kernel: atmel-ehci 700000.ehci: irq 31, io mem 0x00700000
    Oct 30 19:34:20 mtcdt user.info kernel: atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00
    Oct 30 19:34:20 mtcdt user.info kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    Oct 30 19:34:20 mtcdt user.info kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    Oct 30 19:34:20 mtcdt user.info kernel: usb usb1: Product: EHCI Host Controller
    Oct 30 19:34:20 mtcdt user.info kernel: usb usb1: Manufacturer: Linux 3.12.27 ehci_hcd
    Oct 30 19:34:20 mtcdt user.info kernel: usb usb1: SerialNumber: 700000.ehci
    Oct 30 19:34:20 mtcdt user.info kernel: hub 1-0:1.0: USB hub found
    Oct 30 19:34:20 mtcdt user.info kernel: hub 1-0:1.0: 3 ports detected
    Oct 30 19:34:20 mtcdt user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Oct 30 19:34:20 mtcdt user.info kernel: at91_ohci 600000.ohci: AT91 OHCI
    Oct 30 19:34:20 mtcdt user.info kernel: at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2
    Oct 30 19:34:20 mtcdt user.info kernel: at91_ohci 600000.ohci: irq 31, io mem 0x00600000
    Oct 30 19:34:20 mtcdt user.info kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    Oct 30 19:34:20 mtcdt user.info kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    Oct 30 19:34:20 mtcdt user.info kernel: usb usb2: Product: AT91 OHCI
    Oct 30 19:34:20 mtcdt user.info kernel: usb usb2: Manufacturer: Linux 3.12.27 ohci_hcd
    Oct 30 19:34:20 mtcdt user.info kernel: usb usb2: SerialNumber: at91
    Oct 30 19:34:20 mtcdt user.info kernel: hub 2-0:1.0: USB hub found
    Oct 30 19:34:20 mtcdt user.info kernel: hub 2-0:1.0: 3 ports detected
    Oct 30 19:34:20 mtcdt user.warn kernel: rtc (null): invalid alarm value: 1900-1-1 0:0:0
    Oct 30 19:34:20 mtcdt user.info kernel: at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0
    Oct 30 19:34:20 mtcdt user.info kernel: at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver.
    Oct 30 19:34:20 mtcdt user.info kernel: i2c /dev entries driver
    Oct 30 19:34:20 mtcdt user.info kernel: at91sam9_wdt: enabled (heartbeat=15 sec, nowayout=0)
    Oct 30 19:34:20 mtcdt user.info kernel: Netfilter messages via NETLINK v0.30.
    Oct 30 19:34:20 mtcdt user.info kernel: nf_conntrack version 0.5.0 (3973 buckets, 15892 max)
    Oct 30 19:34:20 mtcdt user.info kernel: ipip: IPv4 over IPv4 tunneling driver
    Oct 30 19:34:20 mtcdt user.info kernel: gre: GRE over IPv4 demultiplexor driver
    Oct 30 19:34:20 mtcdt user.info kernel: ip_gre: GRE over IPv4 tunneling driver
    Oct 30 19:34:20 mtcdt user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
    Oct 30 19:34:20 mtcdt user.info kernel: TCP: cubic registered
    Oct 30 19:34:20 mtcdt user.info kernel: NET: Registered protocol family 17
    Oct 30 19:34:20 mtcdt user.info kernel: l2tp_core: L2TP core driver, V2.0
    Oct 30 19:34:20 mtcdt user.notice kernel: Key type dns_resolver registered
    Oct 30 19:34:20 mtcdt user.info kernel: at91_rtc fffffeb0.rtc: setting system clock to 2017-10-30 19:34:10 UTC (1509392050)
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2: new high-speed USB device number 2 using atmel-ehci
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2: New USB device found, idVendor=0424, idProduct=2534
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    Oct 30 19:34:20 mtcdt user.info kernel: hub 1-2:1.0: USB hub found
    Oct 30 19:34:20 mtcdt user.info kernel: hub 1-2:1.0: 4 ports detected
    Oct 30 19:34:20 mtcdt user.info kernel: usb 2-3: new full-speed USB device number 2 using at91_ohci
    Oct 30 19:34:20 mtcdt user.info kernel: usb 2-3: New USB device found, idVendor=04e2, idProduct=1412
    Oct 30 19:34:20 mtcdt user.info kernel: usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2.2: new high-speed USB device number 3 using atmel-ehci
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2.2: New USB device found, idVendor=0403, idProduct=6014
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2.2: Product: Single RS232-HS
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2.2: Manufacturer: FTDI
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2.3: new high-speed USB device number 4 using atmel-ehci
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2.3: New USB device found, idVendor=1bc7, idProduct=0021
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2.3: Product: 6 CDC-ACM
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2.3: Manufacturer: Telit
    Oct 30 19:34:20 mtcdt user.info kernel: usb 1-2.3: SerialNumber: 356136077615161
    Oct 30 19:34:20 mtcdt user.notice kernel: jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    Oct 30 19:34:20 mtcdt user.info kernel: VFS: Mounted root (jffs2 filesystem) readonly on device 31:8.
    Oct 30 19:34:20 mtcdt user.info kernel: devtmpfs: mounted
    Oct 30 19:34:20 mtcdt user.info kernel: Freeing unused kernel memory: 156K (c04f0000 - c0517000)
    Oct 30 19:34:20 mtcdt user.notice kernel: jffs2: notice: (73) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    Oct 30 19:34:20 mtcdt user.notice kernel: jffs2: notice: (73) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_io_init:823: init: v1.1.1
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:748: detected board MTCDT-0.0
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:751: sizeof: 512
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:752: vendor-id: Multi-Tech Systems
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:753: product-id: MTCDT-H5-210L
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:754: device-id: 19276775
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:755: hw-version: MTCDT-0.0
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:762: mac-addr: 00:08:00:4A:24:8F
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:764: imei: 356136077615161
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:765: capa-gps: no
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:766: capa-din: no
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:767: capa-dout: no
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:768: capa-adc: no
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:769: capa-wifi: no
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:770: capa-bluetooth: no
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:mts_id_eeprom_load:794: uuid: E9F71B0BCBF9A385DDCD96D395EE291B
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:load_port:647: no accessory card inserted in port 1
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:load_port:682: accessory card 2 vendor-id: Multi-Tech Systems
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:load_port:683: accessory card 2 product-id: MTAC-LORA-868
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:load_port:684: accessory card 2 device-id: 19228852
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:load_port:685: accessory card 2 hw-version: MTAC-LORA-1.0
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:load_port:706: accessory card 2 eui: 00:80:00:00:A0:00:10:E6
    Oct 30 19:34:20 mtcdt user.info kernel: [INFO] mts-io:lora_setup:42: loading LORA accessory card in port 2
    jsparser error: jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    Bad JSON file, reverting to defaults
    Copying default db.json
    Generating server cert
    /etc/rc5.d/S30api: line 39: openssl: command not found
    Oct 30 19:34:20 mtcdt user.info kernel: macb f802c000.ethernet eth0: link up (100/Full)
    [INFO] eeprom_main.c:main:536: loaded id eeprom from /sys/bus/i2c/devices/i2c-0/0-0056/eeprom successfully
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:276: sizeof: 512
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:277: vendor-id: Multi-Tech Systems
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:278: product-id: MTCDT-H5-210L
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:279: device-id: 19276775
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:280: hw-version: MTCDT-0.0
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:287: mac-addr: 00:08:00:4A:24:8F
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:288: imei: 356136077615161
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:289: capa-gps: no
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:290: capa-din: no
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:291: capa-dout: no
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:292: capa-adc: no
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:293: capa-wifi: no
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:294: capa-bluetooth: no
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:302: mac-bluetooth: 00:00:00:00:00:00
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:309: mac-wifi: 00:00:00:00:00:00
    [INFO] eeprom_main.c:mts_id_eeprom_inspect:315: uuid: E9F71B0BCBF9A385DDCD96D395EE291B
    Reading accessory cards data
    /sbin/get-eeprom-device-info: line 57: tr: command not found
    /sbin/get-eeprom-device-info: line 57: tr: command not found
    /sbin/get-eeprom-device-info: line 57: tr: command not found
    /sbin/get-eeprom-device-info: line 57: tr: command not found
    /sbin/get-eeprom-device-info: line 57: tr: command not found
    Adding accessory cards data
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    Generating /var/run/config/lighttpd_port.conf
    starting local time setup...Setting timezone to jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    ln: /var/run/localtime: File exists
    Generating Timezone List
    ls: /usr/share/zoneinfo: No such file or directory
    /etc/rc5.d/S50usb-gadget: line 14: usb-gadget: command not found
    Starting Lighttpd Web Server: start-stop-daemon: can't execute '/usr/sbin/lighttpd': No such file or directory
    lighttpd.
    syslog configure and reload
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    Starting Mosquitto...
    start-stop-daemon: can't execute '/usr/sbin/mosquitto': No such file or directory
    starting backoff-timers setup
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    Database init...
    starting network interfaces setup
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    Firewall Initialization
    firewall: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    /sbin/routing_setup: line 9: [: 0: unary operator expected
    mkdir: can't create directory '/var/lock/ddns_lock': No such file or directory
    Ddns lock not acquired, resource in use
    starting dns and dhcp services
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    Oct 30 19:34:24 mtcdt daemon.info dnsmasq[378]: started, version 2.68 cachesize 150
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    Oct 30 19:34:24 mtcdt daemon.info dnsmasq[378]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset auth
    Oct 30 19:34:24 mtcdt daemon.warn dnsmasq[378]: warning: interface lo0 does not currently exist
    Oct 30 19:34:24 mtcdt daemon.warn dnsmasq[378]: no servers found in /var/run/wan_resolv.conf, will retry
    Oct 30 19:34:24 mtcdt daemon.err dnsmasq[378]: failed to load names from /var/config/hosts: No such file or directory
    /etc/rc5.d/S80lora-network-server: line 43: /usr/bin/python: No such file or directory
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    PPP Service Disabled
    Setting modem diversity...
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    Modem diversity is disabled.
    usage: /sbin/set-modem-diversity <device> <radio-code> <enabled>
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    device : modem tty
    radio-code : H5, EV3, LAT1, VW2 or LEU1
    enabled : 1 or 0
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    starting time setup...done.
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    Starting WAN manager
    /sbin/wan-manager: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    Starting Carrier Detect and Signal Strength LEDs
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    Starting RM client
    /sbin/monitor-annexcd: line 3: mts-io-sysfs: command not found
    /sbin/monitor-annexcd: line 4: mts-io-sysfs: command not found
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    Starting Call-Home Service
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    setting /sys/class/leds/led-status/trigger to heartbeat
    /sbin/call_home: line 14: mts-io-sysfs: command not found
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    /sbin/call_home: line 15: mts-io-sysfs: command not found
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    starting node-red
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    Call-Home Not Needed
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    env: can't execute 'python': No such file or directory
    Stopping Bootlog daemon: bootlogd.
    Setting up User-Space Watchdog
    Oct 30 19:34:26 mtcdt auth.err getty[505]: can't open '/dev/ttyGS0': No such file or directory^M
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    Unable to pull configurations from API for Watchdog. Assuming pppd is enabled.

    _ _
    _ __ ___ | | (_)_ __ _ ___ __
    | '_ ` _ \| | | | '_ \| | | \ \/ /
    | | | | | | |___| | | | | |_| |> <
    |_| |_| |_|_____|_|_| |_|\__,_/_/\_\

    MultiTech Systems mLinux GNU/Linux
    mLinux 3.1.0 mtcdt /dev/ttyS0


    Version: 1.0.25-Beta
    Date: 2015-06-03T13:28:21
    mtcdt login: jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    sh: mts-io-sysfs: command not found
    Oct 30 19:34:26 mtcdt user.notice watchdog: User-Space Watchdog Running : [ /dev/watchdog ] opts [ --ppp ]
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    Oct 30 19:34:36 mtcdt auth.err getty[548]: can't open '/dev/ttyGS0': No such file or directory^M
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    Oct 30 19:34:46 mtcdt auth.err getty[581]: can't open '/dev/ttyGS0': No such file or directory^M
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    Oct 30 19:34:56 mtcdt auth.err getty[609]: can't open '/dev/ttyGS0': No such file or directory^M
    sh: pgrep: command not found
    Oct 30 19:34:57 mtcdt user.err watchdog: [ERROR] watchdog.c:get_process_id_from_name:71: Error: Process [pppd] not found.
    Oct 30 19:34:57 mtcdt user.err watchdog: [ERROR] watchdog.c:run:232: [pppd] is not running. checking for radio device [/dev/modem_at0]
    Oct 30 19:34:57 mtcdt user.err watchdog: [ERROR] watchdog.c:run:234: [/dev/modem_at0] not found. resetting power to radio
    sh: mts-io-sysfs: command not found
    Oct 30 19:34:57 mtcdt user.err watchdog: [ERROR] watchdog.c:run:237: Restarting [pppd] with command [/etc/init.d/ppp restart &].
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    Restarting pppd
    Stopping ppp monitor and check
    Stopping pppd
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    PPP Service Disabled
    Setting modem diversity...
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    Modem diversity is disabled.
    usage: /sbin/set-modem-diversity <device> <radio-code> <enabled>
    device : modem tty
    radio-code : H5, EV3, LAT1, VW2 or LEU1
    enabled : 1 or 0
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    Oct 30 19:35:06 mtcdt auth.err getty[660]: can't open '/dev/ttyGS0': No such file or directory^M
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    Oct 30 19:35:16 mtcdt auth.err getty[669]: can't open '/dev/ttyGS0': No such file or directory^M
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    Oct 30 19:35:26 mtcdt auth.err getty[682]: can't open '/dev/ttyGS0': No such file or directory^M
    sh: pgrep: command not found
    Oct 30 19:35:27 mtcdt user.err watchdog: [ERROR] watchdog.c:get_process_id_from_name:71: Error: Process [pppd] not found.
    Oct 30 19:35:27 mtcdt user.err watchdog: [ERROR] watchdog.c:run:232: [pppd] is not running. checking for radio device [/dev/modem_at0]
    Oct 30 19:35:27 mtcdt user.err watchdog: [ERROR] watchdog.c:run:234: [/dev/modem_at0] not found. resetting power to radio
    sh: mts-io-sysfs: command not found
    Oct 30 19:35:27 mtcdt user.err watchdog: [ERROR] watchdog.c:run:237: Restarting [pppd] with command [/etc/init.d/ppp restart &].
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    Restarting pppd
    Stopping ppp monitor and check
    Stopping pppd
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    PPP Service Disabled
    Setting modem diversity...
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    jsparser: error while loading shared libraries: libmts.so.0: cannot open shared object file: No such file or directory
    curl: error while loading shared libraries: libcurl.so.5: cannot open shared object file: No such file or directory
    Modem diversity is disabled.
    usage: /sbin/set-modem-diversity <device> <radio-code> <enabled>
    device : modem tty
    radio-code : H5, EV3, LAT1, VW2 or LEU1
    enabled : 1 or 0
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found
    Oct 30 19:35:36 mtcdt auth.err getty[729]: can't open '/dev/ttyGS0': No such file or directory^M
    /sbin/led_cd_ss: line 8: radio_query: command not found
    /sbin/led_cd_ss: line 41: mts-io-sysfs: command not found