Skip to content

Instantly share code, notes, and snippets.

View egernst's full-sized avatar

Eric Ernst egernst

87 followers · 9 following
View GitHub Profile
@egernst
egernst / prometheus_fluentd_pod_monitor.md
Created June 11, 2020 18:19 — forked from mcastelino/prometheus_fluentd_pod_monitor.md
Prometheus - POD Monitor for Fluentd 
---
apiVersion: monitoring.coreos.com/v1
kind: PodMonitor
metadata:
  name: fluentd-es
  labels:
    k8s-app: fluentd-es
spec:
 selector:
@egernst
egernst / prometheus_fluentd_pod_monitor.md
Created June 11, 2020 18:19 — forked from mcastelino/prometheus_fluentd_pod_monitor.md
Prometheus - POD Monitor for Fluentd 
---
apiVersion: monitoring.coreos.com/v1
kind: PodMonitor
metadata:
  name: fluentd-es
  labels:
    k8s-app: fluentd-es
spec:
 selector:
@egernst
egernst / ipmi-sol.md
Created March 4, 2020 17:51 — forked from krsna1729/ipmi-sol.md
ipmi serial over lan sol

Pre-requisites

Install IPMItools using your package manager on laptop and target machine. Load the drivers on the target.

modprobe ipmi_devintf
modprobe ipmi_si

If you see the following, drivers are not loaded.

@egernst
egernst / kubelet-api.md
Created January 27, 2020 19:58 — forked from lizrice/kubelet-api.md
Checking Kubelet API access

Accessing Kubelet API

curl -sk https://localhost:10250/pods/
  • If --anonymous-auth is turned off, you will see a 401 Unauthorized response.
  • If --anonymous-auth is true and --authorization-mode is Webhook you'll see 403 Forbidden response with message Forbidden (user=system:anonymous, verb=get, resource=nodes, subresource=proxy)
  • If --anonymous-auth is true and --authorization-mode is AlwaysAllow you'll see a list of pods.
@egernst
egernst / iptables-cheatsheet.md
Last active May 9, 2025 01:10 — forked from mcastelino/iptables-cheatsheet.md
iptables-cheatsheet

The netfilter hooks in the kernel and where they hook in the packet flow

The figure below calls out

  • The netfilter hooks
  • The order of table traversal
@egernst
egernst / Debug CC QEMU pc-lite.md
Last active April 28, 2017 07:54 — forked from mcastelino/Debug CC QEMU pc-lite.md
Debugging Clear Containers Kernel and Rootfs using qemu-lite

Debug the kernel and rootfs for Clear Containers with pc lite

sudo qemu-lite-system-x86_64 \
  -machine pc-lite,accel=kvm,kernel_irqchip,nvdimm \
  -cpu host -m 256,maxmem=1G,slots=2 \
  -smp 2 -no-user-config -nodefaults \
  -rtc base=utc,driftfix=slew -global kvm-pit.lost_tick_policy=discard \
  -kernel ./vmlinux-4.9.4-53.container \
  -append "reboot=k panic=1 rw tsc=reliable no_timer_check \