fragolinux

This gist is a follow-up to the CSI Integration blog post on the Velero website. Updates here include:

Below are the updated set of instructions to

Create AKS cluster with kubernetes version v1.17 or later. In this example an AKS cluster running v1.18.6 is used.
Install CSI driver

	# prerequisiti:
	# avere una chiave gpg da usare per crittografare il proprio portachiavi gopass...

	# install gopass via asdf
	asdf plugin add gopass
	asdf install gopass 1.15.5
	asdf global gopass 1.15.5

	# creazione portachiavi gopass
	gopass setup

	#!/bin/bash

	# curl -sL https://gist.github.com/fragolinux/e5637fb30d82d6bc0b3b28309be2c1b8/raw/touchid_sudo.sh \| bash
	# This script is ready to copy-paste in whole, or just the line above (without the leading #)

	# Use TouchID for sudo on modern MacBook Pro machines
	# This script adds a single line to the top of the PAM configuration for sudo
	# See: https://apple.stackexchange.com/q/259093/41827 for more info.

	touchid_sudo(){

	#!/usr/bin/env bash
	# shellcheck disable=2155

	GREEN="\033[0;32m"
	RED="\033[0;31m"
	COLOR_RESET="\033[0m"

	echog(){
	echo;echo;echo -e "### ${GREEN}${1}${COLOR_RESET} ###"
	}

	#!/usr/bin/env bash

	set -m # enable job control

	## run with "-d" command line switch to debug each step, script will wait for keypress to go on
	## integrated mods by KingdonB in his fork: https://gist.github.com/kingdonb/dec74f3b74ffbb83b54d53d5c033e508
	## added proper coredns patching via "coredns-custom" configmap
	## added automatic /etc/hosts file modification if needed, sudo password will be asked in case
	## added (commented out) lines to add Flux extra controllers to the setup
	## deployed podinfo as in Flux Get Started guide

	# $XDG_CONFIG_HOME/k9s/plugin.yml
	# check your env, XDG_CONFIG_HOME should be defined as ~/.config
	# move selected line to chosen resource in K9s, then:
	# Shift-T (with confirmation) to toggle helm releases or kustomizations suspend and resume
	# Shift-R (no confirmation) to reconcile a git source or a helm release or a kustomization
	plugin:
	toggle-helmrelease:
	shortCut: Shift-T
	confirm: true
	scopes:

	#!/usr/bin/env bash
	## direnv disabler script, inspired by "basher" uninstall script
	# shellcheck disable=SC2034

	die() {
	echo "!! $1 " >&2
	echo "!! -----------------------------" >&2
	exit 1
	}

	#!/usr/bin/env bash
	## direnv enabler script, inspired by "basher" install script

	die() {
	echo "!! $1 " >&2
	echo "!! -----------------------------" >&2
	exit 1
	}

	## stop if direnv is not installed

	a couple of sensors and a lovelace card to show latest tasmota info in HA
	if you don't like the colors, change them in the CSS code at line 14 :-)
	------------- in configuration.yaml -------------
	# Sensors
	sensor:
	- platform: command_line
	name: Tasmota Dev
	command: 'curl -s https://raw.githubusercontent.com/arendst/Tasmota/development/tasmota/CHANGELOG.md\|grep -m 1 "###"\|cut -c 5-\|cut -d\ -f1'
	scan_interval: 3600
	# note: the following sensor will not produce output in HA itself, but creates a local file which will be included in a custom lovelace card

	#!/bin/bash
	#################################
	# Speech Script by Dan Fountain #
	# [email protected] #
	#################################


	INPUT=$*
	STRINGNUM=0