johnfking · February 24, 2020 01:56 · Feb 14, 2020 · Feb 14, 2020 · Feb 14, 2020 · Feb 14, 2020
diff --git a/7300_wsjtx.md b/7300_wsjtx.md
@@ -1,4 +1,5 @@
 IC-7300 digital modes/FT8 setup
+===
 
 WSJT-X Radio tab
 ---

diff --git a/7300_wsjtx.md b/7300_wsjtx.md
@@ -64,5 +64,5 @@ WSJT-X Waterfall + Main Window
 
 Macos Settings
 ---
-- Applications->Utilities->Audio Midi Setup->USB Audio Codec 1: Left/Right both set to approximately -9.0db, adjust as needed while monitoring ALC levels on the rig. ALC should be about half or 3/4 while transmitting.
+- Applications->Utilities->Audio Midi Setup->USB Audio Codec 1: Left/Right both set to approximately -9.0db, adjust as needed while monitoring ALC levels on the rig. ALC should be at about 1/2 to 3/4 while transmitting. Some experimentation and outside verification (Web SDRs?) needed to make sure you're not overdriving the audio.
 - Silicon Labs CP210x USB to UART Bridge VCP Drivers installed: https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
diff --git a/7300_wsjtx.md b/7300_wsjtx.md
@@ -62,6 +62,7 @@ WSJT-X Waterfall + Main Window
   - USB Send/Keying: All Off except Inhibit Timer
 
 
-Macos Audio Settings
+Macos Settings
 ---
 - Applications->Utilities->Audio Midi Setup->USB Audio Codec 1: Left/Right both set to approximately -9.0db, adjust as needed while monitoring ALC levels on the rig. ALC should be about half or 3/4 while transmitting.
+- Silicon Labs CP210x USB to UART Bridge VCP Drivers installed: https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
diff --git a/7300_wsjtx.md b/7300_wsjtx.md
@@ -1,4 +1,4 @@
-My 7300 digital modes/FT8 setup
+IC-7300 digital modes/FT8 setup
 
 WSJT-X Radio tab
 ---

diff --git a/7300_wsjtx.md b/7300_wsjtx.md
@@ -1,3 +1,5 @@
+My 7300 digital modes/FT8 setup
+
 WSJT-X Radio tab
 ---
 - Serial Port: /dev/cu.SLAB_USBtoUART

diff --git a/7300_wsjtx.md b/7300_wsjtx.md
@@ -34,7 +34,7 @@ WSJT-X Waterfall + Main Window
 ---
 - Mode: USB-D
 - Filter Bandwidth set to widest possible (3.6k), sharp falloff
-- Function menu: AGC, NR, BC, Notch, Preamps, etc all turned off
+- Function menu: AGC, NR, NB, Notch, Preamps, Vox, etc all turned off
 - Display typically set to waterfall + Meter
 - Set -> Connectors:
   - ACC/USB Output Select: AF

diff --git a/7300_wsjtx.md b/7300_wsjtx.md
@@ -16,7 +16,21 @@ WSJT-X Audio tab
 - Input/Output set to the 7300's USB device
 
 
-7300 settings
+WSJT-X Waterfall + Main Window
+---
+- Bins/Pixel: 4
+- Start: 200-300 Hz
+- N Avg: 2
+- Palette: Digipan or to taste
+- Cumulative
+- Flatten: unchecked
+- Ref Spec: unchecked
+- Spec 30%
+- Sliders on default/center except upper-right adjust to taste, usually ~30%
+- Pwr slider 100%
+
+
+7300 rig settings
 ---
 - Mode: USB-D
 - Filter Bandwidth set to widest possible (3.6k), sharp falloff
@@ -43,4 +57,9 @@ WSJT-X Audio tab
     - CI-V USB Echo Back: On
   - USB Serial Function: CI-V
   - RTTY Decode Baud Rate: 19200
-  - USB Send/Keying: All Off except Inhibit Timer
+  - USB Send/Keying: All Off except Inhibit Timer
+
+
+Macos Audio Settings
+---
+- Applications->Utilities->Audio Midi Setup->USB Audio Codec 1: Left/Right both set to approximately -9.0db, adjust as needed while monitoring ALC levels on the rig. ALC should be about half or 3/4 while transmitting.
diff --git a/7300_wsjtx.md b/7300_wsjtx.md
@@ -1,4 +1,4 @@
-Radio tab
+WSJT-X Radio tab
 ---
 - Serial Port: /dev/cu.SLAB_USBtoUART
 - Baud Rate: 115200
@@ -11,6 +11,36 @@ Radio tab
 - Split operation: Rig
 
 
-Audio tab
+WSJT-X Audio tab
 ---
-- Input/Output set to the 7300's USB device
+- Input/Output set to the 7300's USB device
+
+
+7300 settings
+---
+- Mode: USB-D
+- Filter Bandwidth set to widest possible (3.6k), sharp falloff
+- Function menu: AGC, NR, BC, Notch, Preamps, etc all turned off
+- Display typically set to waterfall + Meter
+- Set -> Connectors:
+  - ACC/USB Output Select: AF
+  - ACC/USB AF Output Level: 10-30% (adjust as needed for band, noise level)
+  - ACC/USB AF SQL: Off (Open)
+  - ACC/USB AF Beep: Off
+  - ACC/USB IF Output Level: 50%
+  - ACC Mod Level: 50%
+  - USB Mod Level: 40%
+  - Data Off Mod: MIC,ACC
+  - Data Mod: USB
+  - CI-V:
+    - CI-V Baud Rate: Auto
+    - CI-V Address: 94h
+    - CI-V Transceive: ON
+    - CI-V USB->Remote Transceive Address: 00h
+    - CV-V Output (for ANT): Off
+    - CI-V Baud Port: Unlink from [REMOTE]
+    - CI-V USB Baud Rate: 115200
+    - CI-V USB Echo Back: On
+  - USB Serial Function: CI-V
+  - RTTY Decode Baud Rate: 19200
+  - USB Send/Keying: All Off except Inhibit Timer
diff --git a/7300_wsjtx.md b/7300_wsjtx.md
@@ -1,16 +1,16 @@
 Radio tab
 ---
-Serial Port: /dev/cu.SLAB_USBtoUART
-Baud Rate: 115200
-Data Bits: Eight
-Stop Bits: Two
-Handshake: None
-Force Control Lines: (Leave both empty)
-PTT Method: CAT
-Mode: Data/PKT
-Split operation: Rig
+- Serial Port: /dev/cu.SLAB_USBtoUART
+- Baud Rate: 115200
+- Data Bits: Eight
+- Stop Bits: Two
+- Handshake: None
+- Force Control Lines: (Leave both empty)
+- PTT Method: CAT
+- Mode: Data/PKT
+- Split operation: Rig
 
 
 Audio tab
 ---
-Input/Output set to the 7300's USB device
+- Input/Output set to the 7300's USB device
diff --git a/7300_wsjtx.md b/7300_wsjtx.md
@@ -0,0 +1,16 @@
+Radio tab
+---
+Serial Port: /dev/cu.SLAB_USBtoUART
+Baud Rate: 115200
+Data Bits: Eight
+Stop Bits: Two
+Handshake: None
+Force Control Lines: (Leave both empty)
+PTT Method: CAT
+Mode: Data/PKT
+Split operation: Rig
+
+
+Audio tab
+---
+Input/Output set to the 7300's USB device
No results found