Last active
July 28, 2021 06:18
-
-
Save kphillisjr/070c538659e616992b5952885a044f18 to your computer and use it in GitHub Desktop.
Revisions
-
kphillisjr revised this gist
Jul 28, 2021 . 2 changed files with 0 additions and 0 deletions.There are no files selected for viewing
File renamed without changes.File renamed without changes. -
Jul 28, 2021 . 1 changed file with 554 additions and 0 deletions.There are no files selected for viewing
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode charactersOriginal file line number Diff line number Diff line change @@ -0,0 +1,554 @@ System Information ------------------ Raspberry Pi 3 Model B Rev 1.2 PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" NAME="Raspbian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" Raspberry Pi reference 2021-05-07 Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, dcfd74d7d1fa293065ac6d565711e9ff891fe2b8, stage5 Linux raspberrypi 5.10.17-v7+ #1421 SMP Thu May 27 13:59:01 BST 2021 armv7l GNU/Linux Revision : a02082 Serial : 00000000626e73cc Model : Raspberry Pi 3 Model B Rev 1.2 Throttled flag : throttled=0x50000 Camera : supported=0 detected=0 Videocore information --------------------- May 27 2021 14:04:13 Copyright (c) 2012 Broadcom version 7d9a298cda813f747b51fe17e1e417e7bf5ca94d (clean) (release) (start) alloc failures: 0 compactions: 0 legacy block fails: 0 Filesystem information ---------------------- Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 61074436 7876652 50620968 14% / devtmpfs 439916 0 439916 0% /dev tmpfs 473196 0 473196 0% /dev/shm tmpfs 473196 6460 466736 2% /run tmpfs 5120 4 5116 1% /run/lock tmpfs 473196 0 473196 0% /sys/fs/cgroup /dev/mmcblk0p1 258095 48790 209306 19% /boot tmpfs 94636 4 94632 1% /run/user/1000 Filename Type Size Used Priority /var/swap file 102396 0 -2 Package version information --------------------------- raspberrypi-ui-mods: Installed: 1.20210706 raspberrypi-sys-mods: Installed: 20210706 openbox: Installed: 3.6.1-8+rpt5 lxpanel: Installed: 0.10.0-2+rpt15 pcmanfm: Installed: 1.3.1-1+rpt27 rpd-plym-splash: Installed: 0.26 Networking Information ---------------------- eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x inet6 y::y.y.y.y prefixlen 64 scopeid 0x20<link> ether m.m.m.m txqueuelen 1000 (Ethernet) RX packets 234 bytes 17607 (17.1 KiB) RX errors 0 dropped 2 overruns 0 frame 0 TX packets 153 bytes 22310 (21.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet x.x.x.x netmask x.x.x.x inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether m.m.m.m txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 USB Information --------------- /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M |__ Port 4: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 5: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 5: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 12M config.txt ---------- aphy_params_current=819 arm_freq=1200 arm_freq_min=600 audio_pwm_mode=514 config_hdmi_boost=5 core_freq=400 desired_osc_freq=0x387520 disable_commandline_tags=2 disable_l2cache=1 disable_overscan=1 display_hdmi_rotate=-1 display_lcd_rotate=-1 dphy_params_current=547 dvfs=2 enable_tvout=1 force_eeprom_read=1 force_pwm_open=1 framebuffer_ignore_alpha=1 framebuffer_swap=1 gpu_freq=300 init_uart_clock=0x2dc6c00 lcd_framerate=60 max_framebuffers=-1 over_voltage_avs=62500 pause_burst_frames=1 program_serial_random=1 sdram_freq=450 total_mem=1024 hdmi_force_cec_address:0=65535 hdmi_force_cec_address:1=65535 hdmi_pixel_freq_limit:0=0x9a7ec80 device_tree=- overlay_prefix=overlays/ hdmi_cvt:0= hdmi_cvt:1= hdmi_edid_filename:0= hdmi_edid_filename:1= hdmi_timings:0= hdmi_timings:1= cmdline.txt ----------- coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=960ac5c5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles raspi-gpio settings ------------------- BANK0 (GPIO 0 to 27): GPIO 0: level=1 fsel=0 func=INPUT GPIO 1: level=1 fsel=0 func=INPUT GPIO 2: level=1 fsel=0 func=INPUT GPIO 3: level=1 fsel=0 func=INPUT GPIO 4: level=1 fsel=0 func=INPUT GPIO 5: level=1 fsel=0 func=INPUT GPIO 6: level=1 fsel=0 func=INPUT GPIO 7: level=1 fsel=0 func=INPUT GPIO 8: level=1 fsel=0 func=INPUT GPIO 9: level=0 fsel=0 func=INPUT GPIO 10: level=0 fsel=0 func=INPUT GPIO 11: level=0 fsel=0 func=INPUT GPIO 12: level=0 fsel=0 func=INPUT GPIO 13: level=0 fsel=0 func=INPUT GPIO 14: level=0 fsel=0 func=INPUT GPIO 15: level=1 fsel=0 func=INPUT GPIO 16: level=0 fsel=0 func=INPUT GPIO 17: level=0 fsel=0 func=INPUT GPIO 18: level=0 fsel=0 func=INPUT GPIO 19: level=0 fsel=0 func=INPUT GPIO 20: level=0 fsel=0 func=INPUT GPIO 21: level=0 fsel=0 func=INPUT GPIO 22: level=0 fsel=0 func=INPUT GPIO 23: level=0 fsel=0 func=INPUT GPIO 24: level=0 fsel=0 func=INPUT GPIO 25: level=0 fsel=0 func=INPUT GPIO 26: level=0 fsel=0 func=INPUT GPIO 27: level=0 fsel=0 func=INPUT BANK1 (GPIO 28 to 45): GPIO 28: level=0 fsel=0 func=INPUT GPIO 29: level=1 fsel=0 func=INPUT GPIO 30: level=0 fsel=0 func=INPUT GPIO 31: level=0 fsel=0 func=INPUT GPIO 32: level=1 fsel=7 alt=3 func=TXD0 GPIO 33: level=1 fsel=7 alt=3 func=RXD0 GPIO 34: level=1 fsel=7 alt=3 func=SD1_CLK GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1 GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 GPIO 40: level=0 fsel=4 alt=0 func=PWM0 GPIO 41: level=1 fsel=4 alt=0 func=PWM1 GPIO 42: level=1 fsel=4 alt=0 func=GPCLK1 GPIO 43: level=1 fsel=4 alt=0 func=GPCLK2 GPIO 44: level=1 fsel=0 func=INPUT GPIO 45: level=1 fsel=0 func=INPUT BANK2 (GPIO 46 to 53): GPIO 46: level=1 fsel=0 func=INPUT GPIO 47: level=1 fsel=1 func=OUTPUT GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK GPIO 49: level=1 fsel=4 alt=0 func=SD0_CMD GPIO 50: level=1 fsel=4 alt=0 func=SD0_DAT0 GPIO 51: level=1 fsel=4 alt=0 func=SD0_DAT1 GPIO 52: level=1 fsel=4 alt=0 func=SD0_DAT2 GPIO 53: level=1 fsel=4 alt=0 func=SD0_DAT3 vcdbg log messages ------------------ 001143.688: brfs: File read: /mfs/sd/config.txt 001144.753: brfs: File read: 1783 bytes 001228.343: brfs: File read: /mfs/sd/config.txt 001229.323: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined 001248.981: brfs: File read: 1783 bytes 001434.012: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined 001435.338: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined 001435.393: *** Restart logging 001468.493: HDMI0: hdmi_pixel_encoding: 162000000 001473.794: dtb_file 'bcm2710-rpi-3-b.dtb' 001480.050: brfs: File read: /mfs/sd/bcm2710-rpi-3-b.dtb 001480.073: Loading 'bcm2710-rpi-3-b.dtb' to 0x100 size 0x6ee8 001493.727: brfs: File read: 28392 bytes 001506.361: brfs: File read: /mfs/sd/overlays/overlay_map.dtb 001573.247: brfs: File read: 1523 bytes 001578.238: brfs: File read: /mfs/sd/config.txt 001578.880: dtparam: audio=on 001595.258: brfs: File read: 1783 bytes 001597.743: brfs: File read: /mfs/sd/cmdline.txt 001597.804: Read command line from file 'cmdline.txt': 001597.828: 'console=serial0,115200 console=tty1 root=PARTUUID=960ac5c5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles' 003206.803: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined 003262.300: brfs: File read: 166 bytes 003691.547: brfs: File read: /mfs/sd/kernel7.img 003691.572: Loading 'kernel7.img' to 0x8000 size 0x607300 003691.603: Device tree loaded to 0x2eff8c00 (size 0x735c) 003694.129: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined 007362.124: vchiq_core: vchiq_init_state: slot_zero = 0xf7580000, is_master = 1 007366.875: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead 007372.594: TV service:host side not connected, dropping notification 0x00000002, 0x00000001, 0x00000010 dmesg log --------- [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.17-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1421 SMP Thu May 27 13:59:01 BST 2021 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] DMA zone: 2133 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 242688 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920 [ 0.000000] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=960ac5c5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 879832K/970752K available (9216K kernel code, 1311K rwdata, 2940K rodata, 1024K init, 860K bss, 25384K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31910 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x3ac/0x580 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000021] Switching to timer-based delay loop, resolution 52ns [ 0.000306] Console: colour dummy device 80x30 [ 0.000380] printk: console [tty1] enabled [ 0.000432] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000461] pid_max: default: 32768 minimum: 301 [ 0.000672] LSM: Security Framework initializing [ 0.000908] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000932] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002523] Disabling memory control group subsystem [ 0.002641] CPU: Testing write buffer coherency: ok [ 0.003136] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004373] Setting up static identity map for 0x100000 - 0x10003c [ 0.004560] rcu: Hierarchical SRCU implementation. [ 0.005483] smp: Bringing up secondary CPUs ... [ 0.006656] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.007953] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.009175] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.009332] smp: Brought up 1 node, 4 CPUs [ 0.009354] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.009366] CPU: All CPU(s) started in HYP mode. [ 0.009377] CPU: Virtualization extensions available. [ 0.010475] devtmpfs: initialized [ 0.028137] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.028389] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.028419] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.031652] pinctrl core: initialized pinctrl subsystem [ 0.032825] NET: Registered protocol family 16 [ 0.037272] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.043011] audit: initializing netlink subsys (disabled) [ 0.043331] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.043931] thermal_sys: Registered thermal governor 'step_wise' [ 0.045096] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.045111] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.045382] Serial: AMBA PL011 UART driver [ 0.063313] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.080120] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-05-27T14:04:13, variant start [ 0.090131] raspberrypi-firmware soc:firmware: Firmware hash is 7d9a298cda813f747b51fe17e1e417e7bf5ca94d [ 0.139282] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.141780] SCSI subsystem initialized [ 0.142045] usbcore: registered new interface driver usbfs [ 0.142108] usbcore: registered new interface driver hub [ 0.142179] usbcore: registered new device driver usb [ 0.144325] clocksource: Switched to clocksource arch_sys_counter [ 1.919178] VFS: Disk quotas dquot_6.6.0 [ 1.919300] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.919504] FS-Cache: Loaded [ 1.919742] CacheFiles: Loaded [ 1.929719] NET: Registered protocol family 2 [ 1.931005] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.931070] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.931189] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.931382] TCP: Hash tables configured (established 8192 bind 8192) [ 1.931559] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.931616] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.932106] NET: Registered protocol family 1 [ 1.932892] RPC: Registered named UNIX socket transport module. [ 1.932905] RPC: Registered udp transport module. [ 1.932918] RPC: Registered tcp transport module. [ 1.932930] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.934866] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 1.938649] Initialise system trusted keyrings [ 1.938956] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.948539] zbud: loaded [ 1.950629] FS-Cache: Netfs 'nfs' registered for caching [ 1.951515] NFS: Registering the id_resolver key type [ 1.951557] Key type id_resolver registered [ 1.951570] Key type id_legacy registered [ 1.951729] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.952882] Key type asymmetric registered [ 1.952897] Asymmetric key parser 'x509' registered [ 1.952955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.952970] io scheduler mq-deadline registered [ 1.952983] io scheduler kyber registered [ 1.957991] bcm2708_fb soc:fb: FB found 1 display(s) [ 1.997080] Console: switching to colour frame buffer device 240x67 [ 2.032477] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 [ 2.038187] bcm2835-rng 3f104000.rng: hwrng registered [ 2.038641] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 2.039475] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 2.051753] brd: module loaded [ 2.064265] loop: module loaded [ 2.065967] Loading iSCSI transport class v2.0-870. [ 2.067705] libphy: Fixed MDIO Bus: probed [ 2.068002] usbcore: registered new interface driver lan78xx [ 2.068080] usbcore: registered new interface driver smsc95xx [ 2.068103] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.796376] Core Release: 2.80a [ 2.796394] Setting default values for core params [ 2.796428] Finished setting default values for core params [ 2.996815] Using Buffer DMA mode [ 2.996829] Periodic Transfer Interrupt Enhancement - disabled [ 2.996842] Multiprocessor Interrupt Enhancement - disabled [ 2.996856] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 2.996924] Dedicated Tx FIFOs mode [ 2.997645] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b7504000 dma = 0xf7504000 len=9024 [ 2.997681] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 2.997697] dwc_otg: Microframe scheduler enabled [ 2.997773] WARN::hcd_init_fiq:457: FIQ on core 1 [ 2.997791] WARN::hcd_init_fiq:458: FIQ ASM at 807be568 length 36 [ 2.997809] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [ 2.997835] dwc_otg 3f980000.usb: DWC OTG Controller [ 2.997877] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 2.997930] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 [ 2.997985] Init: Port Power? op_state=1 [ 2.997997] Init: Power Port (0) [ 2.998381] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.998399] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.998415] usb usb1: Product: DWC OTG Controller [ 2.998430] usb usb1: Manufacturer: Linux 5.10.17-v7+ dwc_otg_hcd [ 2.998445] usb usb1: SerialNumber: 3f980000.usb [ 2.999255] hub 1-0:1.0: USB hub found [ 2.999323] hub 1-0:1.0: 1 port detected [ 3.000416] dwc_otg: FIQ enabled [ 3.000429] dwc_otg: NAK holdoff enabled [ 3.000440] dwc_otg: FIQ split-transaction FSM enabled [ 3.000459] Module dwc_common_port init [ 3.000833] usbcore: registered new interface driver usb-storage [ 3.001061] mousedev: PS/2 mouse device common for all mice [ 3.002286] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 3.005132] sdhci: Secure Digital Host Controller Interface driver [ 3.005146] sdhci: Copyright(c) Pierre Ossman [ 3.005777] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [ 3.006490] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 3.006717] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.008603] ledtrig-cpu: registered to indicate activity on CPUs [ 3.009044] hid: raw HID events driver (C) Jiri Kosina [ 3.009228] usbcore: registered new interface driver usbhid [ 3.009240] usbhid: USB HID core driver [ 3.014791] Initializing XFRM netlink socket [ 3.014847] NET: Registered protocol family 17 [ 3.015027] Key type dns_resolver registered [ 3.015846] Registering SWP/SWPB emulation handler [ 3.016005] registered taskstats version 1 [ 3.016038] Loading compiled-in X.509 certificates [ 3.017003] Key type ._fscrypt registered [ 3.017017] Key type .fscrypt registered [ 3.017031] Key type fscrypt-provisioning registered [ 3.028615] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 3.028755] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [ 3.031230] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.032970] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 3.032988] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 3.058668] sdhost: log_buf @ (ptrval) (f7507000) [ 3.096821] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 3.098486] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 3.100151] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 3.103125] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 3.107976] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 3.111132] of_cfs_init [ 3.111437] of_cfs_init: OK [ 3.112536] Waiting for root device PARTUUID=960ac5c5-02... [ 3.169286] random: fast init done [ 3.197626] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.202645] mmc0: new high speed SDXC card at address aaaa [ 3.203820] mmcblk0: mmc0:aaaa SC64G 59.5 GiB [ 3.207632] mmcblk0: p1 p2 [ 3.214588] Indeed it is in host mode hprt0 = 00021501 [ 3.242613] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.242714] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.250754] devtmpfs: mounted [ 3.276796] Freeing unused kernel memory: 1024K [ 3.285050] mmc1: new high speed SDIO card at address 0001 [ 3.324855] Run /sbin/init as init process [ 3.324868] with arguments: [ 3.324880] /sbin/init [ 3.324901] splash [ 3.324913] with environment: [ 3.324924] HOME=/ [ 3.324935] TERM=linux [ 3.424411] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.424604] Indeed it is in host mode hprt0 = 00001101 [ 3.664773] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 3.664799] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.665691] hub 1-1:1.0: USB hub found [ 3.665847] hub 1-1:1.0: 5 ports detected [ 3.933367] systemd[1]: System time before build time, advancing clock. [ 3.984391] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 4.092929] NET: Registered protocol family 10 [ 4.094603] Segment Routing with IPv6 [ 4.114834] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 4.114863] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.117808] smsc95xx v2.0.0 [ 4.189349] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.190961] systemd[1]: Detected architecture arm. [ 4.196220] libphy: smsc95xx-mdiobus: probed [ 4.197976] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, m.m.m.m [ 4.257954] systemd[1]: Set hostname to <raspberrypi>. [ 4.294478] usb 1-1.4: new low-speed USB device number 4 using dwc_otg [ 4.429733] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ 4.429761] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.429777] usb 1-1.4: Product: USB Optical Mouse [ 4.429792] usb 1-1.4: Manufacturer: Logitech [ 4.435528] input: Logitech USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C077.0001/input/input0 [ 4.436226] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-3f980000.usb-1.4/input0 [ 4.974401] usb 1-1.5: new full-speed USB device number 5 using dwc_otg [ 5.127486] usb 1-1.5: New USB device found, idVendor=258a, idProduct=002a, bcdDevice= 0.01 [ 5.127514] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.127530] usb 1-1.5: Product: Usb Gaming Keyboard [ 5.127545] usb 1-1.5: Manufacturer: BY Tech [ 5.134193] input: BY Tech Usb Gaming Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:258A:002A.0002/input/input1 [ 5.172739] random: systemd: uninitialized urandom read (16 bytes read) [ 5.189599] random: systemd: uninitialized urandom read (16 bytes read) [ 5.193662] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.194076] random: systemd: uninitialized urandom read (16 bytes read) [ 5.195339] systemd[1]: Listening on Journal Socket. [ 5.195545] hid-generic 0003:258A:002A.0002: input,hidraw1: USB HID v1.11 Keyboard [BY Tech Usb Gaming Keyboard] on usb-3f980000.usb-1.5/input0 [ 5.202102] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.210005] systemd[1]: Mounting Kernel Debug File System... [ 5.211739] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.212820] systemd[1]: Listening on udev Kernel Socket. [ 5.223747] input: BY Tech Usb Gaming Keyboard System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:258A:002A.0003/input/input2 [ 5.230634] systemd[1]: Starting Set the console keyboard layout... [ 5.285344] input: BY Tech Usb Gaming Keyboard Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:258A:002A.0003/input/input3 [ 5.285874] input: BY Tech Usb Gaming Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:258A:002A.0003/input/input5 [ 5.286627] input: BY Tech Usb Gaming Keyboard Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:258A:002A.0003/input/input6 [ 5.287768] hid-generic 0003:258A:002A.0003: input,hiddev96,hidraw2: USB HID v1.11 Keyboard [BY Tech Usb Gaming Keyboard] on usb-3f980000.usb-1.5/input1 [ 5.406110] i2c /dev entries driver [ 6.048663] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 6.159684] systemd-journald[119]: Received request to flush runtime journal from PID 1 [ 7.522882] mc: Linux media interface: v0.10 [ 7.528505] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 7.537128] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 7.537165] [vc_sm_connected_init]: start [ 7.549724] [vc_sm_connected_init]: installed successfully [ 7.611096] videodev: Linux video capture interface: v2.00 [ 7.647716] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 7.655377] bcm2835_audio bcm2835_audio: card created with 4 channels [ 7.666404] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 7.666431] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 7.669411] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 7.671649] bcm2835_audio bcm2835_audio: card created with 4 channels [ 7.724308] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 7.728803] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 7.755910] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 7.756501] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 7.757079] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 7.757569] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 7.757614] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 7.757645] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 7.757666] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 7.757694] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 7.757730] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 7.757962] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 7.775971] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 7.776047] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 7.792678] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 7.792746] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 7.803735] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 7.803805] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 8.078996] random: crng init done [ 8.079024] random: 7 urandom warning(s) missed due to ratelimiting [ 8.167493] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.407457] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.518139] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 8.534525] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 8.535675] usbcore: registered new interface driver brcmfmac [ 8.580040] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt failed with error -2 [ 8.800210] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 8.800407] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 8.801470] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd [ 9.914548] Under-voltage detected! (0x00050000) [ 11.116693] uart-pl011 3f201000.serial: no DMA platform data [ 11.223009] 8021q: 802.1Q VLAN Support v1.8 [ 11.404510] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 11.868529] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 11.994530] Voltage normalised (0x00000000) [ 12.337548] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) [ 12.338176] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 12.354220] smsc95xx 1-1.1:1.0 eth0: Link is Down [ 15.305380] Bluetooth: Core ver 2.22 [ 15.305473] NET: Registered protocol family 31 [ 15.305481] Bluetooth: HCI device and connection manager initialized [ 15.305502] Bluetooth: HCI socket layer initialized [ 15.305515] Bluetooth: L2CAP socket layer initialized [ 15.305535] Bluetooth: SCO socket layer initialized [ 15.315985] Bluetooth: HCI UART driver ver 2.3 [ 15.316001] Bluetooth: HCI UART protocol H4 registered [ 15.316087] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 15.316246] Bluetooth: HCI UART protocol Broadcom registered [ 15.435227] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ 15.435271] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.568271] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.568284] Bluetooth: BNEP filters: protocol multicast [ 15.568303] Bluetooth: BNEP socket layer initialized [ 17.629233] fuse: init (API version 7.32) [ 19.019479] Bluetooth: RFCOMM TTY layer initialized [ 19.019525] Bluetooth: RFCOMM socket layer initialized [ 19.019571] Bluetooth: RFCOMM ver 1.11 -
Jul 28, 2021 .There are no files selected for viewing
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode charactersOriginal file line number Diff line number Diff line change @@ -0,0 +1,613 @@ System Information ------------------ Raspberry Pi 4 Model B Rev 1.2 PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" NAME="Raspbian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" Raspberry Pi reference 2021-05-07 Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, dcfd74d7d1fa293065ac6d565711e9ff891fe2b8, stage5 Linux raspberrypi 5.10.17-v7l+ #1421 SMP Thu May 27 14:00:13 BST 2021 armv7l GNU/Linux Revision : c03112 Serial : 10000000994a03aa Model : Raspberry Pi 4 Model B Rev 1.2 Throttled flag : throttled=0x0 Camera : supported=0 detected=0 Videocore information --------------------- May 27 2021 14:02:15 Copyright (c) 2012 Broadcom version 7d9a298cda813f747b51fe17e1e417e7bf5ca94d (clean) (release) (start) alloc failures: 0 compactions: 0 legacy block fails: 0 Filesystem information ---------------------- Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 61074436 7876288 50621332 14% / devtmpfs 1827468 0 1827468 0% /dev tmpfs 1959564 0 1959564 0% /dev/shm tmpfs 1959564 8780 1950784 1% /run tmpfs 5120 4 5116 1% /run/lock tmpfs 1959564 0 1959564 0% /sys/fs/cgroup /dev/mmcblk0p1 258095 48790 209306 19% /boot tmpfs 391912 4 391908 1% /run/user/1000 Filename Type Size Used Priority /var/swap file 102396 0 -2 Package version information --------------------------- raspberrypi-ui-mods: Installed: 1.20210706 raspberrypi-sys-mods: Installed: 20210706 openbox: Installed: 3.6.1-8+rpt5 lxpanel: Installed: 0.10.0-2+rpt15 pcmanfm: Installed: 1.3.1-1+rpt27 rpd-plym-splash: Installed: 0.26 Networking Information ---------------------- eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x inet6 y::y.y.y.y prefixlen 64 scopeid 0x20<link> ether m.m.m.m txqueuelen 1000 (Ethernet) RX packets 3705 bytes 250676 (244.8 KiB) RX errors 0 dropped 1 overruns 0 frame 0 TX packets 946 bytes 195741 (191.1 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet x.x.x.x netmask x.x.x.x inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether m.m.m.m txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 USB Information --------------- /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 3: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 3: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 4: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M config.txt ---------- arm_freq=1500 audio_pwm_mode=514 config_hdmi_boost=5 core_freq=500 core_freq_min=200 disable_commandline_tags=2 disable_l2cache=1 disable_overscan=1 display_hdmi_rotate=-1 display_lcd_rotate=-1 dvfs=2 enable_gic=1 force_eeprom_read=1 force_pwm_open=1 framebuffer_ignore_alpha=1 framebuffer_swap=1 gpu_freq=500 gpu_freq_min=250 init_uart_clock=0x2dc6c00 lcd_framerate=60 mask_gpu_interrupt0=1024 mask_gpu_interrupt1=0x10000 max_framebuffers=2 over_voltage_avs=-36250 pause_burst_frames=1 program_serial_random=1 total_mem=4096 hdmi_force_cec_address:0=65535 hdmi_force_cec_address:1=65535 hdmi_pixel_freq_limit:0=0x11e1a300 hdmi_pixel_freq_limit:1=0x11e1a300 device_tree=- overlay_prefix=overlays/ hdmi_cvt:0= hdmi_cvt:1= hdmi_edid_filename:0= hdmi_edid_filename:1= hdmi_timings:0= hdmi_timings:1= cmdline.txt ----------- coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:75:87:DF vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=960ac5c5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles raspi-gpio settings ------------------- BANK0 (GPIO 0 to 27): GPIO 0: level=1 fsel=0 func=INPUT pull=UP GPIO 1: level=1 fsel=0 func=INPUT pull=UP GPIO 2: level=1 fsel=0 func=INPUT pull=UP GPIO 3: level=1 fsel=0 func=INPUT pull=UP GPIO 4: level=1 fsel=0 func=INPUT pull=UP GPIO 5: level=1 fsel=0 func=INPUT pull=UP GPIO 6: level=1 fsel=0 func=INPUT pull=UP GPIO 7: level=1 fsel=0 func=INPUT pull=UP GPIO 8: level=1 fsel=0 func=INPUT pull=UP GPIO 9: level=0 fsel=0 func=INPUT pull=DOWN GPIO 10: level=0 fsel=0 func=INPUT pull=DOWN GPIO 11: level=0 fsel=0 func=INPUT pull=DOWN GPIO 12: level=0 fsel=0 func=INPUT pull=DOWN GPIO 13: level=0 fsel=0 func=INPUT pull=DOWN GPIO 14: level=1 fsel=0 func=INPUT pull=NONE GPIO 15: level=1 fsel=0 func=INPUT pull=UP GPIO 16: level=0 fsel=0 func=INPUT pull=DOWN GPIO 17: level=0 fsel=0 func=INPUT pull=DOWN GPIO 18: level=0 fsel=0 func=INPUT pull=DOWN GPIO 19: level=0 fsel=0 func=INPUT pull=DOWN GPIO 20: level=0 fsel=0 func=INPUT pull=DOWN GPIO 21: level=0 fsel=0 func=INPUT pull=DOWN GPIO 22: level=0 fsel=0 func=INPUT pull=DOWN GPIO 23: level=0 fsel=0 func=INPUT pull=DOWN GPIO 24: level=0 fsel=0 func=INPUT pull=DOWN GPIO 25: level=0 fsel=0 func=INPUT pull=DOWN GPIO 26: level=0 fsel=0 func=INPUT pull=DOWN GPIO 27: level=0 fsel=0 func=INPUT pull=DOWN BANK1 (GPIO 28 to 45): GPIO 28: level=1 fsel=2 alt=5 func=RGMII_MDIO pull=UP GPIO 29: level=0 fsel=2 alt=5 func=RGMII_MDC pull=DOWN GPIO 30: level=0 fsel=7 alt=3 func=CTS0 pull=UP GPIO 31: level=0 fsel=7 alt=3 func=RTS0 pull=NONE GPIO 32: level=1 fsel=7 alt=3 func=TXD0 pull=NONE GPIO 33: level=1 fsel=7 alt=3 func=RXD0 pull=UP GPIO 34: level=0 fsel=7 alt=3 func=SD1_CLK pull=NONE GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD pull=UP GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 pull=UP GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1 pull=UP GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 pull=UP GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 pull=UP GPIO 40: level=0 fsel=4 alt=0 func=PWM1_0 pull=NONE GPIO 41: level=1 fsel=4 alt=0 func=PWM1_1 pull=NONE GPIO 42: level=0 fsel=1 func=OUTPUT pull=UP GPIO 43: level=1 fsel=0 func=INPUT pull=UP GPIO 44: level=1 fsel=0 func=INPUT pull=UP GPIO 45: level=1 fsel=0 func=INPUT pull=UP BANK2 (GPIO 46 to 53): GPIO 46: level=0 fsel=0 func=INPUT pull=UP GPIO 47: level=0 fsel=0 func=INPUT pull=UP GPIO 48: level=0 fsel=0 func=INPUT pull=DOWN GPIO 49: level=0 fsel=0 func=INPUT pull=DOWN GPIO 50: level=0 fsel=0 func=INPUT pull=DOWN GPIO 51: level=0 fsel=0 func=INPUT pull=DOWN GPIO 52: level=0 fsel=0 func=INPUT pull=DOWN GPIO 53: level=0 fsel=0 func=INPUT pull=DOWN vcdbg log messages ------------------ 005243.592: arasan: arasan_emmc_open 005677.045: brfs: File read: /mfs/sd/config.txt 005677.872: brfs: File read: 1783 bytes 005772.694: brfs: File read: /mfs/sd/config.txt 005788.942: brfs: File read: 1783 bytes 006268.837: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined 006271.334: *** Restart logging 006311.982: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead 006311.997: HDMI0: hdmi_pixel_encoding: 300000000 006312.009: HDMI1: hdmi_pixel_encoding: 300000000 006316.942: dtb_file 'bcm2711-rpi-4-b.dtb' 006324.083: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb 006324.098: Loading 'bcm2711-rpi-4-b.dtb' to 0x100 size 0xbfc2 006336.624: brfs: File read: 49090 bytes 006348.537: brfs: File read: /mfs/sd/overlays/overlay_map.dtb 006412.243: brfs: File read: 1523 bytes 006416.266: brfs: File read: /mfs/sd/config.txt 006416.777: dtparam: audio=on 006426.735: brfs: File read: 1783 bytes 006439.636: brfs: File read: /mfs/sd/overlays/vc4-fkms-v3d.dtbo 006456.754: Loaded overlay 'vc4-fkms-v3d' 006496.438: brfs: File read: 1446 bytes 006499.819: brfs: File read: /mfs/sd/cmdline.txt 006499.865: Read command line from file 'cmdline.txt': 006499.878: 'console=serial0,115200 console=tty1 root=PARTUUID=960ac5c5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles' 007803.121: brfs: File read: 166 bytes 009127.043: brfs: File read: /mfs/sd/kernel7l.img 009127.083: Loading 'kernel7l.img' to 0x8000 size 0x662680 009127.131: Device tree loaded to 0x2eff3a00 (size 0xc5de) 009150.054: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined 012522.095: vchiq_core: vchiq_init_state: slot_zero = 0xded80000, is_master = 1 012525.649: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead 012533.189: TV service:host side not connected, dropping notification 0x00000002, 0x00000001, 0x00000010 017900.235: TV service:host side not connected, dropping notification 0x00000008, 0x00000004, 0x00000000 022590.421: TV service:host side not connected, dropping notification 0x00000008, 0x00000004, 0x00000000 dmesg log --------- [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.17-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1421 SMP Thu May 27 14:00:13 BST 2021 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x00000000fbffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 2304 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920 [ 0.000000] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1010432 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=960ac5c5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000017cc0000-0x000000001bcc0000] (64MB) [ 0.000000] Memory: 3654936K/4050944K available (10240K kernel code, 1358K rwdata, 3160K rodata, 2048K init, 890K bss, 133864K reserved, 262144K cma-reserved, 3264512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 33942 entries in 67 pages [ 0.000000] ftrace: allocated 67 pages with 3 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=0 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000029] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000093] bcm2835: system timer (irq = 25) [ 0.000743] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000761] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000780] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000796] Switching to timer-based delay loop, resolution 18ns [ 0.001057] Console: colour dummy device 80x30 [ 0.001127] printk: console [tty1] enabled [ 0.001186] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.001219] pid_max: default: 32768 minimum: 301 [ 0.001392] LSM: Security Framework initializing [ 0.001582] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001609] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003234] Disabling memory control group subsystem [ 0.003359] CPU: Testing write buffer coherency: ok [ 0.003840] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005073] Setting up static identity map for 0x200000 - 0x20003c [ 0.005278] rcu: Hierarchical SRCU implementation. [ 0.006221] smp: Bringing up secondary CPUs ... [ 0.007491] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.008916] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.010251] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010411] smp: Brought up 1 node, 4 CPUs [ 0.010432] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.010447] CPU: All CPU(s) started in HYP mode. [ 0.010461] CPU: Virtualization extensions available. [ 0.011423] devtmpfs: initialized [ 0.025735] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.025981] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.026014] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.033350] pinctrl core: initialized pinctrl subsystem [ 0.034489] NET: Registered protocol family 16 [ 0.038717] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.039514] audit: initializing netlink subsys (disabled) [ 0.039778] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [ 0.040376] thermal_sys: Registered thermal governor 'step_wise' [ 0.041226] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.041243] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.041659] Serial: AMBA PL011 UART driver [ 0.073914] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.090879] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-05-27T14:02:15, variant start [ 0.100891] raspberrypi-firmware soc:firmware: Firmware hash is 7d9a298cda813f747b51fe17e1e417e7bf5ca94d [ 0.145705] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.149921] vgaarb: loaded [ 0.150369] SCSI subsystem initialized [ 0.150602] usbcore: registered new interface driver usbfs [ 0.150663] usbcore: registered new interface driver hub [ 0.150737] usbcore: registered new device driver usb [ 0.151443] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.153524] clocksource: Switched to clocksource arch_sys_counter [ 1.155897] VFS: Disk quotas dquot_6.6.0 [ 1.156013] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.156202] FS-Cache: Loaded [ 1.156397] CacheFiles: Loaded [ 1.157482] simple-framebuffer 3e3cf000.framebuffer: framebuffer at 0x3e3cf000, 0x7f8000 bytes, mapped to 0x(ptrval) [ 1.157505] simple-framebuffer 3e3cf000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680 [ 1.158009] Console: switching to colour frame buffer device 240x67 [ 1.168612] simple-framebuffer 3e3cf000.framebuffer: fb0: simplefb registered! [ 1.177376] NET: Registered protocol family 2 [ 1.178281] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.178336] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.178495] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.178571] TCP: Hash tables configured (established 8192 bind 8192) [ 1.178743] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.178780] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.179040] NET: Registered protocol family 1 [ 1.179783] RPC: Registered named UNIX socket transport module. [ 1.179799] RPC: Registered udp transport module. [ 1.179817] RPC: Registered tcp transport module. [ 1.179832] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.179857] PCI: CLS 0 bytes, default 64 [ 1.182936] Initialise system trusted keyrings [ 1.183183] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.191874] zbud: loaded [ 1.193900] FS-Cache: Netfs 'nfs' registered for caching [ 1.194665] NFS: Registering the id_resolver key type [ 1.194719] Key type id_resolver registered [ 1.194734] Key type id_legacy registered [ 1.194877] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.195933] Key type asymmetric registered [ 1.195952] Asymmetric key parser 'x509' registered [ 1.196145] bounce: pool size: 64 pages [ 1.196199] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.196423] io scheduler mq-deadline registered [ 1.196440] io scheduler kyber registered [ 1.201032] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.201064] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.201145] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.201254] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 1.255627] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.256005] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.256026] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.256060] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.256151] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.256400] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.259929] PCI: bus0: Fast back to back transfers disabled [ 1.260273] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.260401] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.260836] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.264361] PCI: bus1: Fast back to back transfers disabled [ 1.264425] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.264449] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.264530] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.264557] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.264976] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.265209] pcieport 0000:00:00.0: PME: Signaling with IRQ 62 [ 1.273845] iproc-rng200 fe104000.rng: hwrng registered [ 1.274159] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.275012] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.287339] brd: module loaded [ 1.299896] loop: module loaded [ 1.301606] Loading iSCSI transport class v2.0-870. [ 1.304192] libphy: Fixed MDIO Bus: probed [ 1.305927] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.323570] libphy: bcmgenet MII bus: probed [ 1.413674] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.414869] usbcore: registered new interface driver r8152 [ 1.414949] usbcore: registered new interface driver lan78xx [ 1.415010] usbcore: registered new interface driver smsc95xx [ 1.416651] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [ 1.416820] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.416856] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.420226] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000030000000890 [ 1.421582] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.421602] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.421619] usb usb1: Product: xHCI Host Controller [ 1.421635] usb usb1: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd [ 1.421651] usb usb1: SerialNumber: 0000:01:00.0 [ 1.422396] hub 1-0:1.0: USB hub found [ 1.422495] hub 1-0:1.0: 1 port detected [ 1.423184] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.423211] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.423239] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.423785] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.423804] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.423821] usb usb2: Product: xHCI Host Controller [ 1.423837] usb usb2: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd [ 1.423854] usb usb2: SerialNumber: 0000:01:00.0 [ 1.424576] hub 2-0:1.0: USB hub found [ 1.424673] hub 2-0:1.0: 4 ports detected [ 1.426407] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.426723] dwc_otg: FIQ enabled [ 1.426738] dwc_otg: NAK holdoff enabled [ 1.426753] dwc_otg: FIQ split-transaction FSM enabled [ 1.426770] Module dwc_common_port init [ 1.427242] usbcore: registered new interface driver uas [ 1.427350] usbcore: registered new interface driver usb-storage [ 1.427552] mousedev: PS/2 mouse device common for all mice [ 1.429210] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.432802] sdhci: Secure Digital Host Controller Interface driver [ 1.432818] sdhci: Copyright(c) Pierre Ossman [ 1.433581] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.434204] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.438416] ledtrig-cpu: registered to indicate activity on CPUs [ 1.438769] hid: raw HID events driver (C) Jiri Kosina [ 1.438962] usbcore: registered new interface driver usbhid [ 1.438977] usbhid: USB HID core driver [ 1.445024] Initializing XFRM netlink socket [ 1.445066] NET: Registered protocol family 17 [ 1.445189] Key type dns_resolver registered [ 1.445654] Registering SWP/SWPB emulation handler [ 1.445832] registered taskstats version 1 [ 1.445861] Loading compiled-in X.509 certificates [ 1.446742] Key type ._fscrypt registered [ 1.446758] Key type .fscrypt registered [ 1.446773] Key type fscrypt-provisioning registered [ 1.458567] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.458879] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.458959] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [ 1.465799] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.466864] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.466882] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.497305] of_cfs_init [ 1.497583] of_cfs_init: OK [ 1.516796] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.518500] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.520205] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.523252] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.525161] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.531620] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 1.532309] Waiting for root device PARTUUID=960ac5c5-02... [ 1.572299] random: fast init done [ 1.635069] mmc0: new ultra high speed DDR50 SDXC card at address aaaa [ 1.636255] mmcblk0: mmc0:aaaa SC64G 59.5 GiB [ 1.641422] mmcblk0: p1 p2 [ 1.643814] mmc1: new high speed SDIO card at address 0001 [ 1.656638] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.656715] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.661943] devtmpfs: mounted [ 1.671205] Freeing unused kernel memory: 2048K [ 1.733863] Run /sbin/init as init process [ 1.733878] with arguments: [ 1.733893] /sbin/init [ 1.733907] splash [ 1.733921] with environment: [ 1.733936] HOME=/ [ 1.733950] TERM=linux [ 1.783601] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.966242] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 1.966265] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.966283] usb 1-1: Product: USB2.0 Hub [ 1.968419] hub 1-1:1.0: USB hub found [ 1.968693] hub 1-1:1.0: 4 ports detected [ 2.147701] systemd[1]: System time before build time, advancing clock. [ 2.250664] NET: Registered protocol family 10 [ 2.252144] Segment Routing with IPv6 [ 2.303600] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd [ 2.321714] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.323329] systemd[1]: Detected architecture arm. [ 2.369659] systemd[1]: Set hostname to <raspberrypi>. [ 2.454457] usb 1-1.3: New USB device found, idVendor=258a, idProduct=002a, bcdDevice= 0.01 [ 2.454482] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.454502] usb 1-1.3: Product: Usb Gaming Keyboard [ 2.454519] usb 1-1.3: Manufacturer: BY Tech [ 2.466742] input: BY Tech Usb Gaming Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:258A:002A.0001/input/input0 [ 2.535042] hid-generic 0003:258A:002A.0001: input,hidraw0: USB HID v1.11 Keyboard [BY Tech Usb Gaming Keyboard] on usb-0000:01:00.0-1.3/input0 [ 2.551021] input: BY Tech Usb Gaming Keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:258A:002A.0002/input/input1 [ 2.614155] input: BY Tech Usb Gaming Keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:258A:002A.0002/input/input2 [ 2.614664] input: BY Tech Usb Gaming Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:258A:002A.0002/input/input4 [ 2.615027] input: BY Tech Usb Gaming Keyboard Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:258A:002A.0002/input/input5 [ 2.615707] hid-generic 0003:258A:002A.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [BY Tech Usb Gaming Keyboard] on usb-0000:01:00.0-1.3/input1 [ 2.713713] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd [ 2.872243] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ 2.872266] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.872284] usb 1-1.4: Product: USB Optical Mouse [ 2.872301] usb 1-1.4: Manufacturer: Logitech [ 2.881656] input: Logitech USB Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C077.0003/input/input6 [ 2.882210] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:01:00.0-1.4/input0 [ 3.086732] random: systemd: uninitialized urandom read (16 bytes read) [ 3.099569] random: systemd: uninitialized urandom read (16 bytes read) [ 3.102076] systemd[1]: Created slice User and Session Slice. [ 3.102362] random: systemd: uninitialized urandom read (16 bytes read) [ 3.102439] systemd[1]: Reached target Slices. [ 3.103309] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.103457] systemd[1]: Reached target Swap. [ 3.104552] systemd[1]: Listening on Journal Audit Socket. [ 3.105231] systemd[1]: Listening on udev Kernel Socket. [ 3.106059] systemd[1]: Listening on Journal Socket. [ 3.306280] i2c /dev entries driver [ 3.830217] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 3.934522] systemd-journald[112]: Received request to flush runtime journal from PID 1 [ 4.579023] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 4.579681] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 4.580219] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 4.580760] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 4.961627] mc: Linux media interface: v0.10 [ 5.026791] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 5.150432] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.155129] bcm2835_audio bcm2835_audio: card created with 4 channels [ 5.236997] bcm2835_audio bcm2835_audio: card created with 4 channels [ 5.248333] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 5.248362] [vc_sm_connected_init]: start [ 5.248383] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.251440] [vc_sm_connected_init]: installed successfully [ 5.275484] videodev: Linux video capture interface: v2.00 [ 5.321455] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 5.329014] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 5.347942] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 5.349391] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 5.350044] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 5.350529] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 5.350906] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 5.350937] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 5.350977] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 5.351002] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 5.351024] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 5.356784] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 5.395585] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 5.409962] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 5.410017] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 5.419435] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 5.419486] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 5.451734] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.460152] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 5.460247] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 5.469198] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [ 5.469228] checking generic (3e3cf000 7f8000) vs hw (0 ffffffffffffffff) [ 5.469245] fb0: switching to vc4drmfb from simple [ 5.469988] Console: switching to colour dummy device 80x30 [ 5.472917] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 5.491728] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 5.512010] Console: switching to colour frame buffer device 240x67 [ 5.512074] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 5.644267] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 5.656215] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.658007] usbcore: registered new interface driver brcmfmac [ 5.689106] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 [ 5.968362] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.984083] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 7.177332] uart-pl011 fe201000.serial: no DMA platform data [ 7.241422] random: crng init done [ 7.241445] random: 7 urandom warning(s) missed due to ratelimiting [ 7.663991] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 7.669537] 8021q: 802.1Q VLAN Support v1.8 [ 8.110109] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 8.454370] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 8.455704] bcmgenet fd580000.ethernet eth0: Link is Down [ 9.869484] broken atomic modeset userspace detected, disabling atomic [ 12.633699] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.633731] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.946112] fuse: init (API version 7.32) [ 13.902698] Bluetooth: Core ver 2.22 [ 13.902769] NET: Registered protocol family 31 [ 13.902776] Bluetooth: HCI device and connection manager initialized [ 13.903090] Bluetooth: HCI socket layer initialized [ 13.903102] Bluetooth: L2CAP socket layer initialized [ 13.903122] Bluetooth: SCO socket layer initialized [ 13.919384] Bluetooth: HCI UART driver ver 2.3 [ 13.919398] Bluetooth: HCI UART protocol H4 registered [ 13.919460] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 13.919649] Bluetooth: HCI UART protocol Broadcom registered [ 14.204586] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.204596] Bluetooth: BNEP filters: protocol multicast [ 14.204613] Bluetooth: BNEP socket layer initialized [ 14.241418] Bluetooth: RFCOMM TTY layer initialized [ 14.241436] Bluetooth: RFCOMM socket layer initialized [ 14.241459] Bluetooth: RFCOMM ver 1.11 [ 35.000886] v3d fec00000.v3d: MMU error from client L2T (0) at 0x7a1000, pte invalid