Skip to content

Instantly share code, notes, and snippets.

View leoaday's full-sized avatar

leoaday leoaday

2 followers · 5 following
View GitHub Profile
@TheRealKeto
TheRealKeto / FuturerestoreGuide.md
Last active November 25, 2024 04:38
A guide fully covering the process of using Futurerestore to upgrade, downgrade, or re-restore to an unsigned iOS firmware.

Futurerestore Guide

Futurerestore is a tool that allows users to upgrade, downgrade, or re-restore their iOS device to an unsigned firmware through the use of SHSH2 blobs. This guide will teach you how to use Futurerestore in order to upgrade, downgrade, or re-restore to an unsigned firmware.

Before continuing, keep in mind that this guide is based off of this one, and contains information that can change your device's behavior or even damage it. With that in mind, please read the guide fully, as no one but YOU will be held responsible for any damage caused to your device.

Notes and Hints

Throughout the entirety of this guide, keep in mind that:

  • iOS 13.1.3's SEP and Baseband are NOT compatible with iOS 12.x for all devices. This means that you're NOT able to upgrade, downgrade, or re-restore A10-A12X devices back to iOS 12.x. Attempting to use an incompatible SEP and Baseband will cause Futureresto
@mayoff
mayoff / !README.md
Last active August 14, 2023 15:09
Debugging Objective-C blocks in lldb

The attached lldb command pblock command lets you peek inside an Objective-C block. It tries to tell you where to find the source code for the block, and the values captured by the block when it was created.

Consider this example program:

#import <Foundation/Foundation.h>

@interface Foo: NSObject
@end

@implementation Foo

@Siguza
Siguza / dsc_syms.c
Last active February 20, 2022 02:19
dyld_shared_cache symbols to r2 flags
// Moved here: https://github.com/Siguza/misc/blob/master/dsc_syms.c
@danisfermi
danisfermi / setupdb.md
Created December 15, 2017 23:00
Setup gdb on Mac OS Sierra/High Sierra

Here are the steps to installing and setting up GDB on Mac OS Sierra/High Sierra. Run brew install gdb. On starting gdb, you will get the following error:

Unable to find Mach task port for process-id 2133: (os/kern) failure (0x5).
 (please check gdb is codesigned - see taskgated(8))

To fix this error, follow the following steps:

@deanlyoung
deanlyoung / url-schemes-settings-ios.mkd
Last active October 31, 2025 15:23 — forked from phynet/url-schemes-settings-ios.mkd
URL Schemes (Updated)

Note

Apple will reject apps that are using private url schemes (Ugh, Apple....) if they are pretty much obvius. Some apps are rejected and others are not, so, be aware of this issue before implementing any of those URL's in your app as a feature.

Updates

  • [UPDATE 4] iOS 10 update: apparently settings now can be reached using App-Pref instead of prefs
  • [UPDATE 3] For now you just can use url schemes to open your apps's settings with Swift 3.0 (Xcode 8). I'll keep you informed when OS preferences can be reached
  • [UPDATE 2] The openURL() method of UIApplication is now deprecated. You should use application(_:open:options:) instead
  • [UPDATE 1] Not yet tested in iOS 10. It will fail because of policies changes in URL scheme handling.
@matteyeux
matteyeux / jinstall
Created October 27, 2016 10:28
Script to install or update some tools made by J Levin
#!/bin/bash
#######################################################################
#
# Project......: jinstall
# Creator......: matteyeux
# Description..: Script to install or update some tools made by J Levin
# (Too lazy to download and extract myself)
# Type.........: Public
#
######################################################################
@al3xtjames
al3xtjames / simpleMLB.sh
Last active August 10, 2021 12:57
Deprecated - Use https://github.com/al3xtjames/MacGen instead
#!/bin/bash
#
# Simple Main Logic Board (MLB) Serial Generator Script by TheRacerMaster
# Based off the work of Hanger1, AGuyWhoIsBored & Alien:X
# NOTE: This is a simple script that doesn't do any checking of other SMBIOS values. It needs valid SMBIOS data which includes the following:
# - Valid SmUUID value in Clover config.plist under SMBIOS (generated using uuidgen)
# - ROM value set to UseMacAddr0 in Clover config.plist (uses MAC address of your first NIC as ROM value)
# - Properly formatted serial number (doesn't have to be a real one, just formatted properly) in Clover config.plist under SMBIOS
# - Don't use a generic serial number (such as Clover's default)! It needs to be at least semi-unique.
# - Try using a generated serial number that isn't real (but formatted correctly) from Clover Configurator, Chameleon Wizard, etc.
@ifels
ifels / centos6.5_nginx
Last active September 7, 2023 01:57
centos 6.5 nginx安装与配置
第一步，在/etc/yum.repos.d/目录下创建一个源配置文件nginx.repo：
cd /etc/yum.repos.d/
vim nginx.repo
填写如下内容：
[nginx]
name=nginx repo
@clifgriffin
clifgriffin / autofit_text_to_image.php
Last active May 4, 2022 18:04
Auto fit text to image using PHP / Imagick
<?php
/**
* Auto Fit Text To Image
*
* Write text to image using a target width, height, and starting font size.
*
* @author Clif Griffin
* @url http://cgd.io/2014/auto-fit-text-to-an-image-with-php-and-wordpress
*
@janimo
janimo / gist:5412727
Created April 18, 2013 13:35
Script to unpack Huawei UPDATE.APP Android firmware blobs
#!/usr/bin/perl
######################################################################
#
# File : split_updata.pl
# Author(s) : McSpoon
# Description : Unpack a Huawei U8220 'UPDATA.APP' file.
# http://pulse.modaco.com
#
# Last Modified : Thu 24 December 2009
# By : McSpoon