liwsakilive · April 29, 2021 06:39 · Apr 29, 2021
diff --git a/kolla-ansible-db-only b/kolla-ansible-db-only
@@ -0,0 +1,772 @@
+---
+# You can use this file to override _any_ variable throughout Kolla.
+# Additional options can be found in the
+# 'kolla-ansible/ansible/group_vars/all.yml' file. Default value of all the
+# commented parameters are shown here, To override the default value uncomment
+# the parameter and change its value.
+
+ansible_python_interpreter: /usr/bin/python3
+
+###############
+# Kolla options
+###############
+# Valid options are [ COPY_ONCE, COPY_ALWAYS ]
+#config_strategy: "COPY_ALWAYS"
+
+# Valid options are ['centos', 'debian', 'rhel', 'ubuntu']
+#kolla_base_distro: "centos"
+
+# Valid options are [ binary, source ]
+kolla_install_type: "source"
+
+# Do not override this unless you know what you are doing.
+openstack_release: "victoria"
+
+# Docker image tag used by default.
+openstack_tag: "{{ openstack_release ~ openstack_tag_suffix }}"
+
+# Suffix applied to openstack_release to generate openstack_tag.
+#openstack_tag_suffix: ""
+
+# Location of configuration overrides
+#node_custom_config: "/etc/kolla/config"
+
+# This should be a VIP, an unused IP on your network that will float between
+# the hosts running keepalived for high-availability. If you want to run an
+# All-In-One without haproxy and keepalived, you can set enable_haproxy to no
+# in "OpenStack options" section, and set this value to the IP of your
+# 'network_interface' as set in the Networking section below.
+kolla_internal_vip_address: "192.168.0.111"
+
+# This is the DNS name that maps to the kolla_internal_vip_address VIP. By
+# default it is the same as kolla_internal_vip_address.
+#kolla_internal_fqdn: "{{ kolla_internal_vip_address }}"
+
+# This should be a VIP, an unused IP on your network that will float between
+# the hosts running keepalived for high-availability. It defaults to the
+# kolla_internal_vip_address, allowing internal and external communication to
+# share the same address.  Specify a kolla_external_vip_address to separate
+# internal and external requests between two VIPs.
+#kolla_external_vip_address: "{{ kolla_internal_vip_address }}"
+
+# The Public address used to communicate with OpenStack as set in the public_url
+# for the endpoints that will be created. This DNS name should map to
+# kolla_external_vip_address.
+#kolla_external_fqdn: "{{ kolla_external_vip_address }}"
+
+# Optionally change the path to sysctl.conf modified by Kolla Ansible plays.
+kolla_sysctl_conf_path: /etc/sysctl.conf
+
+################
+# Docker options
+################
+
+# Custom docker registry settings:
+#docker_registry:
+#docker_registry_insecure: "{{ 'yes' if docker_registry else 'no' }}"
+#docker_registry_username:
+# docker_registry_password is set in the passwords.yml file.
+
+# Namespace of images:
+#docker_namespace: "kolla"
+
+# Docker client timeout in seconds.
+#docker_client_timeout: 120
+
+#docker_configure_for_zun: "no"
+#containerd_configure_for_zun: "no"
+#containerd_grpc_gid: 42463
+
+###################
+# Messaging options
+###################
+# Below is an example of an separate backend that provides brokerless
+# messaging for oslo.messaging RPC communications
+
+#om_rpc_transport: "amqp"
+#om_rpc_user: "{{ qdrouterd_user }}"
+#om_rpc_password: "{{ qdrouterd_password }}"
+#om_rpc_port: "{{ qdrouterd_port }}"
+#om_rpc_group: "qdrouterd"
+
+# Whether to enable TLS for oslo.messaging communication with RabbitMQ.
+#om_enable_rabbitmq_tls: "{{ rabbitmq_enable_tls | bool }}"
+# CA certificate bundle in containers using oslo.messaging with RabbitMQ TLS.
+#om_rabbitmq_cacert: "{{ rabbitmq_cacert }}"
+
+##############################
+# Neutron - Networking Options
+##############################
+# This interface is what all your api services will be bound to by default.
+# Additionally, all vxlan/tunnel and storage network traffic will go over this
+# interface by default. This interface must contain an IP address.
+# It is possible for hosts to have non-matching names of interfaces - these can
+# be set in an inventory file per host or per group or stored separately, see
+#     http://docs.ansible.com/ansible/intro_inventory.html
+# Yet another way to workaround the naming problem is to create a bond for the
+# interface on all hosts and give the bond name here. Similar strategy can be
+# followed for other types of interfaces.
+network_interface: "ens3"
+
+# These can be adjusted for even more customization. The default is the same as
+#enable_keepalived: "{{ enable_haproxy | bool }}"
+# the 'network_interface'. These interfaces must contain an IP address.
+#kolla_external_vip_interface: "{{ network_interface }}"
+#api_interface: "{{ network_interface }}"
+#storage_interface: "{{ network_interface }}"
+#swift_storage_interface: "{{ storage_interface }}"
+#swift_replication_interface: "{{ swift_storage_interface }}"
+#tunnel_interface: "{{ network_interface }}"
+#dns_interface: "{{ network_interface }}"
+#octavia_network_interface: "{{ api_interface }}"
+
+# Configure the address family (AF) per network.
+# Valid options are [ ipv4, ipv6 ]
+#network_address_family: "ipv4"
+#api_address_family: "{{ network_address_family }}"
+#storage_address_family: "{{ network_address_family }}"
+#swift_storage_address_family: "{{ storage_address_family }}"
+#swift_replication_address_family: "{{ swift_storage_address_family }}"
+#migration_address_family: "{{ api_address_family }}"
+#tunnel_address_family: "{{ network_address_family }}"
+#octavia_network_address_family: "{{ api_address_family }}"
+#bifrost_network_address_family: "{{ network_address_family }}"
+#dns_address_family: "{{ network_address_family }}"
+
+# This is the raw interface given to neutron as its external network port. Even
+# though an IP address can exist on this interface, it will be unusable in most
+# configurations. It is recommended this interface not be configured with any IP
+# addresses for that reason.
+#neutron_external_interface: "eth1"
+
+# Valid options are [ openvswitch, ovn, linuxbridge, vmware_nsxv, vmware_nsxv3, vmware_dvs ]
+# if vmware_nsxv3 is selected, enable_openvswitch MUST be set to "no" (default is yes)
+#neutron_plugin_agent: "openvswitch"
+
+# Valid options are [ internal, infoblox ]
+#neutron_ipam_driver: "internal"
+
+# Configure Neutron upgrade option, currently Kolla support
+# two upgrade ways for Neutron: legacy_upgrade and rolling_upgrade
+# The variable "neutron_enable_rolling_upgrade: yes" is meaning rolling_upgrade
+# were enabled and opposite
+# Neutron rolling upgrade were enable by default
+#neutron_enable_rolling_upgrade: "yes"
+
+
+####################
+# keepalived options
+####################
+# Arbitrary unique number from 0..255
+# This should be changed from the default in the event of a multi-region deployment
+# where the VIPs of different regions reside on a common subnet.
+#keepalived_virtual_router_id: "51"
+
+###################
+# Dimension options
+###################
+# This is to provide an extra option to deploy containers with Resource constraints.
+# We call it dimensions here.
+# The dimensions for each container are defined by a mapping, where each dimension value should be a
+# string.
+# Reference_Docs
+# https://docs.docker.com/config/containers/resource_constraints/
+# eg:
+# <container_name>_dimensions:
+#    blkio_weight:
+#    cpu_period:
+#    cpu_quota:
+#    cpu_shares:
+#    cpuset_cpus:
+#    cpuset_mems:
+#    mem_limit:
+#    mem_reservation:
+#    memswap_limit:
+#    kernel_memory:
+#    ulimits:
+
+#####################
+# Healthcheck options
+#####################
+#enable_container_healthchecks: "yes"
+# Healthcheck options for Docker containers
+# interval/timeout/start_period are in seconds
+#default_container_healthcheck_interval: 30
+#default_container_healthcheck_timeout: 30
+#default_container_healthcheck_retries: 3
+#default_container_healthcheck_start_period: 5
+
+
+#############
+# TLS options
+#############
+# To provide encryption and authentication on the kolla_external_vip_interface,
+# TLS can be enabled.  When TLS is enabled, certificates must be provided to
+# allow clients to perform authentication.
+#kolla_enable_tls_internal: "no"
+#kolla_enable_tls_external: "{{ kolla_enable_tls_internal if kolla_same_external_internal_vip | bool else 'no' }}"
+#kolla_certificates_dir: "{{ node_config }}/certificates"
+#kolla_external_fqdn_cert: "{{ kolla_certificates_dir }}/haproxy.pem"
+#kolla_internal_fqdn_cert: "{{ kolla_certificates_dir }}/haproxy-internal.pem"
+#kolla_admin_openrc_cacert: ""
+#kolla_copy_ca_into_containers: "no"
+#haproxy_backend_cacert: "{{ 'ca-certificates.crt' if kolla_base_distro in ['debian', 'ubuntu'] else 'ca-bundle.trust.crt' }}"
+#haproxy_backend_cacert_dir: "/etc/ssl/certs"
+
+##################
+# Backend options
+##################
+#kolla_httpd_keep_alive: "60"
+
+#####################
+# Backend TLS options
+#####################
+#kolla_enable_tls_backend: "no"
+#kolla_verify_tls_backend: "yes"
+#kolla_tls_backend_cert: "{{ kolla_certificates_dir }}/backend-cert.pem"
+#kolla_tls_backend_key: "{{ kolla_certificates_dir }}/backend-key.pem"
+
+#####################
+# ACME client options
+#####################
+# A list of haproxy backend server directives pointing to addresses used by the
+# ACME client to complete http-01 challenge.
+# Please read the docs for more details.
+#acme_client_servers: []
+
+################
+# Region options
+################
+# Use this option to change the name of this region.
+#openstack_region_name: "RegionOne"
+
+# Use this option to define a list of region names - only needs to be configured
+# in a multi-region deployment, and then only in the *first* region.
+#multiple_regions_names: ["{{ openstack_region_name }}"]
+
+###################
+# OpenStack options
+###################
+# Use these options to set the various log levels across all OpenStack projects
+# Valid options are [ True, False ]
+#openstack_logging_debug: "False"
+
+# Enable core OpenStack services. This includes:
+# glance, keystone, neutron, nova, heat, and horizon.
+enable_openstack_core: "no"
+
+# These roles are required for Kolla to be operation, however a savvy deployer
+# could disable some of these required roles and run their own services.
+#enable_glance: "{{ enable_openstack_core | bool }}"
+enable_haproxy: "yes"
+#enable_keepalived: "{{ enable_haproxy | bool }}"
+enable_keepalived: "no"
+#enable_keystone: "{{ enable_openstack_core | bool }}"
+enable_mariadb: "yes"
+#enable_mariadb: "yes"
+#enable_memcached: "yes"
+#enable_neutron: "{{ enable_openstack_core | bool }}"
+#enable_nova: "{{ enable_openstack_core | bool }}"
+#enable_rabbitmq: "{{ 'yes' if om_rpc_transport == 'rabbit' or om_notify_transport == 'rabbit' else 'no' }}"
+#enable_outward_rabbitmq: "{{ enable_murano | bool }}"
+
+# OpenStack services can be enabled or disabled with these options
+#enable_aodh: "no"
+#enable_barbican: "no"
+#enable_blazar: "no"
+#enable_ceilometer: "no"
+#enable_ceilometer_ipmi: "no"
+#enable_cells: "no"
+#enable_central_logging: "no"
+#enable_chrony: "yes"
+#enable_cinder: "no"
+#enable_cinder_backup: "yes"
+#enable_cinder_backend_hnas_nfs: "no"
+#enable_cinder_backend_iscsi: "{{ enable_cinder_backend_lvm | bool or enable_cinder_backend_zfssa_iscsi | bool }}"
+#enable_cinder_backend_lvm: "no"
+#enable_cinder_backend_nfs: "no"
+#enable_cinder_backend_zfssa_iscsi: "no"
+#enable_cinder_backend_quobyte: "no"
+#enable_cloudkitty: "no"
+#enable_collectd: "no"
+#enable_cyborg: "no"
+#enable_designate: "no"
+#enable_destroy_images: "no"
+#enable_elasticsearch: "{{ 'yes' if enable_central_logging | bool or enable_osprofiler | bool or enable_skydive | bool or enable_monasca | bool else 'no' }}"
+#enable_elasticsearch_curator: "no"
+#enable_etcd: "no"
+#enable_fluentd: "yes"
+#enable_freezer: "no"
+#enable_gnocchi: "no"
+#enable_gnocchi_statsd: "no"
+#enable_grafana: "no"
+#enable_heat: "{{ enable_openstack_core | bool }}"
+#enable_horizon: "{{ enable_openstack_core | bool }}"
+#enable_horizon_blazar: "{{ enable_blazar | bool }}"
+#enable_horizon_cloudkitty: "{{ enable_cloudkitty | bool }}"
+#enable_horizon_designate: "{{ enable_designate | bool }}"
+#enable_horizon_freezer: "{{ enable_freezer | bool }}"
+#enable_horizon_heat: "{{ enable_heat | bool }}"
+#enable_horizon_ironic: "{{ enable_ironic | bool }}"
+#enable_horizon_karbor: "{{ enable_karbor | bool }}"
+#enable_horizon_magnum: "{{ enable_magnum | bool }}"
+#enable_horizon_manila: "{{ enable_manila | bool }}"
+#enable_horizon_masakari: "{{ enable_masakari | bool }}"
+#enable_horizon_mistral: "{{ enable_mistral | bool }}"
+#enable_horizon_monasca: "{{ enable_monasca | bool }}"
+#enable_horizon_murano: "{{ enable_murano | bool }}"
+#enable_horizon_neutron_vpnaas: "{{ enable_neutron_vpnaas | bool }}"
+#enable_horizon_octavia: "{{ enable_octavia | bool }}"
+#enable_horizon_qinling: "{{ enable_qinling | bool }}"
+#enable_horizon_sahara: "{{ enable_sahara | bool }}"
+#enable_horizon_searchlight: "{{ enable_searchlight | bool }}"
+#enable_horizon_senlin: "{{ enable_senlin | bool }}"
+#enable_horizon_solum: "{{ enable_solum | bool }}"
+#enable_horizon_tacker: "{{ enable_tacker | bool }}"
+#enable_horizon_trove: "{{ enable_trove | bool }}"
+#enable_horizon_vitrage: "{{ enable_vitrage | bool }}"
+#enable_horizon_watcher: "{{ enable_watcher | bool }}"
+#enable_horizon_zun: "{{ enable_zun | bool }}"
+#enable_influxdb: "{{ enable_monasca | bool or (enable_cloudkitty | bool and cloudkitty_storage_backend == 'influxdb') }}"
+#enable_ironic: "no"
+#enable_ironic_ipxe: "no"
+#enable_ironic_neutron_agent: "{{ enable_neutron | bool and enable_ironic | bool }}"
+#enable_ironic_pxe_uefi: "no"
+#enable_iscsid: "{{ (enable_cinder | bool and enable_cinder_backend_iscsi | bool) or enable_ironic | bool }}"
+#enable_karbor: "no"
+#enable_kafka: "{{ enable_monasca | bool }}"
+#enable_kibana: "{{ 'yes' if enable_central_logging | bool or enable_monasca | bool else 'no' }}"
+#enable_kuryr: "no"
+#enable_magnum: "no"
+#enable_manila: "no"
+#enable_manila_backend_generic: "no"
+#enable_manila_backend_hnas: "no"
+#enable_manila_backend_cephfs_native: "no"
+#enable_manila_backend_cephfs_nfs: "no"
+#enable_mariabackup: "no"
+#enable_masakari: "no"
+#enable_mistral: "no"
+#enable_monasca: "no"
+#enable_multipathd: "no"
+#enable_murano: "no"
+#enable_neutron_vpnaas: "no"
+#enable_neutron_sriov: "no"
+#enable_neutron_dvr: "no"
+#enable_neutron_qos: "no"
+#enable_neutron_agent_ha: "no"
+#enable_neutron_bgp_dragent: "no"
+#enable_neutron_provider_networks: "no"
+#enable_neutron_segments: "no"
+#enable_neutron_sfc: "no"
+#enable_neutron_trunk: "no"
+#enable_neutron_metering: "no"
+#enable_neutron_infoblox_ipam_agent: "no"
+#enable_neutron_port_forwarding: "no"
+#enable_nova_serialconsole_proxy: "no"
+#enable_nova_ssh: "yes"
+#enable_octavia: "no"
+#enable_openvswitch: "{{ enable_neutron | bool and neutron_plugin_agent != 'linuxbridge' }}"
+#enable_ovn: "{{ enable_neutron | bool and neutron_plugin_agent == 'ovn' }}"
+#enable_ovs_dpdk: "no"
+#enable_osprofiler: "no"
+#enable_panko: "no"
+#enable_placement: "{{ enable_nova | bool or enable_zun | bool }}"
+#enable_prometheus: "no"
+#enable_qdrouterd: "{{ 'yes' if om_rpc_transport == 'amqp' else 'no' }}"
+#enable_qinling: "no"
+#enable_rally: "no"
+#enable_redis: "no"
+#enable_sahara: "no"
+#enable_searchlight: "no"
+#enable_senlin: "no"
+#enable_skydive: "no"
+#enable_solum: "no"
+#enable_storm: "{{ enable_monasca | bool }}"
+#enable_swift: "no"
+#enable_swift_s3api: "no"
+#enable_tacker: "no"
+#enable_telegraf: "no"
+#enable_tempest: "no"
+#enable_trove: "no"
+#enable_trove_singletenant: "no"
+#enable_vitrage: "no"
+#enable_vmtp: "no"
+#enable_watcher: "no"
+#enable_zookeeper: "{{ enable_kafka | bool or enable_storm | bool }}"
+#enable_zun: "no"
+
+##################
+# RabbitMQ options
+##################
+# Options passed to RabbitMQ server startup script via the
+# RABBITMQ_SERVER_ADDITIONAL_ERL_ARGS environment var.
+# See Kolla Ansible docs RabbitMQ section for details.
+# These are appended to args already provided by Kolla Ansible
+# to configure IPv6 in RabbitMQ server.
+#rabbitmq_server_additional_erl_args: ""
+# Whether to enable TLS encryption for RabbitMQ client-server communication.
+#rabbitmq_enable_tls: "no"
+# CA certificate bundle in RabbitMQ container.
+#rabbitmq_cacert: "/etc/ssl/certs/{{ 'ca-certificates.crt' if kolla_base_distro in ['debian', 'ubuntu'] else 'ca-bundle.trust.crt' }}"
+
+#################
+# MariaDB options
+#################
+# List of additional WSREP options
+#mariadb_wsrep_extra_provider_options: []
+
+#######################
+# External Ceph options
+#######################
+# External Ceph - cephx auth enabled (this is the standard nowadays, defaults to yes)
+#external_ceph_cephx_enabled: "yes"
+
+# Glance
+#ceph_glance_keyring: "ceph.client.glance.keyring"
+#ceph_glance_user: "glance"
+#ceph_glance_pool_name: "images"
+# Cinder
+#ceph_cinder_keyring: "ceph.client.cinder.keyring"
+#ceph_cinder_user: "cinder"
+#ceph_cinder_pool_name: "volumes"
+#ceph_cinder_backup_keyring: "ceph.client.cinder-backup.keyring"
+#ceph_cinder_backup_user: "cinder-backup"
+#ceph_cinder_backup_pool_name: "backups"
+# Nova
+#ceph_nova_keyring: "{{ ceph_cinder_keyring }}"
+#ceph_nova_user: "nova"
+#ceph_nova_pool_name: "vms"
+# Gnocchi
+#ceph_gnocchi_keyring: "ceph.client.gnocchi.keyring"
+#ceph_gnocchi_user: "gnocchi"
+#ceph_gnocchi_pool_name: "gnocchi"
+# Manila
+#ceph_manila_keyring: "ceph.client.manila.keyring"
+#ceph_manila_user: "manila"
+
+#############################
+# Keystone - Identity Options
+#############################
+
+# Valid options are [ fernet ]
+#keystone_token_provider: 'fernet'
+
+#keystone_admin_user: "admin"
+
+#keystone_admin_project: "admin"
+
+# Interval to rotate fernet keys by (in seconds). Must be an interval of
+# 60(1 min), 120(2 min), 180(3 min), 240(4 min), 300(5 min), 360(6 min),
+# 600(10 min), 720(12 min), 900(15 min), 1200(20 min), 1800(30 min),
+# 3600(1 hour), 7200(2 hour), 10800(3 hour), 14400(4 hour), 21600(6 hour),
+# 28800(8 hour), 43200(12 hour), 86400(1 day), 604800(1 week).
+#fernet_token_expiry: 86400
+
+
+########################
+# Glance - Image Options
+########################
+# Configure image backend.
+#glance_backend_ceph: "no"
+#glance_backend_file: "yes"
+#glance_backend_swift: "no"
+#glance_backend_vmware: "no"
+#enable_glance_image_cache: "no"
+#glance_enable_property_protection: "no"
+#glance_enable_interoperable_image_import: "no"
+# Configure glance upgrade option.
+# Due to this feature being experimental in glance,
+# the default value is "no".
+#glance_enable_rolling_upgrade: "no"
+
+####################
+# Osprofiler options
+####################
+# valid values: ["elasticsearch", "redis"]
+#osprofiler_backend: "elasticsearch"
+
+##################
+# Barbican options
+##################
+# Valid options are [ simple_crypto, p11_crypto ]
+#barbican_crypto_plugin: "simple_crypto"
+#barbican_library_path: "/usr/lib/libCryptoki2_64.so"
+
+#################
+# Gnocchi options
+#################
+# Valid options are [ file, ceph, swift ]
+#gnocchi_backend_storage: "{% if enable_swift | bool %}swift{% else %}file{% endif %}"
+
+# Valid options are [redis, '']
+#gnocchi_incoming_storage: "{{ 'redis' if enable_redis | bool else '' }}"
+
+################################
+# Cinder - Block Storage Options
+################################
+# Enable / disable Cinder backends
+#cinder_backend_ceph: "no"
+#cinder_backend_vmwarevc_vmdk: "no"
+#cinder_volume_group: "cinder-volumes"
+# Valid options are [ '', redis, etcd ]
+#cinder_coordination_backend: "{{ 'redis' if enable_redis|bool else 'etcd' if enable_etcd|bool else '' }}"
+
+# Valid options are [ nfs, swift, ceph ]
+#cinder_backup_driver: "ceph"
+#cinder_backup_share: ""
+#cinder_backup_mount_options_nfs: ""
+
+#######################
+# Cloudkitty options
+#######################
+# Valid option is gnocchi
+#cloudkitty_collector_backend: "gnocchi"
+# Valid options are 'sqlalchemy' or 'influxdb'. The default value is
+# 'influxdb', which matches the default in Cloudkitty since the Stein release.
+# When the backend is "influxdb", we also enable Influxdb.
+# Also, when using 'influxdb' as the backend, we trigger the configuration/use
+# of Cloudkitty storage backend version 2.
+#cloudkitty_storage_backend: "influxdb"
+
+###################
+# Designate options
+###################
+# Valid options are [ bind9 ]
+#designate_backend: "bind9"
+#designate_ns_record: "sample.openstack.org"
+# Valid options are [ '', redis ]
+#designate_coordination_backend: "{{ 'redis' if enable_redis|bool else '' }}"
+
+########################
+# Nova - Compute Options
+########################
+#nova_backend_ceph: "no"
+
+# Valid options are [ qemu, kvm, vmware ]
+#nova_compute_virt_type: "kvm"
+
+# The number of fake driver per compute node
+#num_nova_fake_per_node: 5
+
+# The flag "nova_safety_upgrade" need to be consider when
+# "nova_enable_rolling_upgrade" is enabled. The "nova_safety_upgrade"
+# controls whether the nova services are all stopped before rolling
+# upgrade to the new version, for the safety and availability.
+# If "nova_safety_upgrade" is "yes", that will stop all nova services (except
+# nova-compute) for no failed API operations before upgrade to the
+# new version. And opposite.
+#nova_safety_upgrade: "no"
+
+# Valid options are [ none, novnc, spice ]
+#nova_console: "novnc"
+
+##############################
+# Neutron - networking options
+##############################
+# Enable distributed floating ip for OVN deployments
+#neutron_ovn_distributed_fip: "no"
+
+#############################
+# Horizon - Dashboard Options
+#############################
+#horizon_backend_database: "{{ enable_murano | bool }}"
+
+#############################
+# Ironic options
+#############################
+# dnsmasq bind interface for Ironic Inspector, by default is network_interface
+#ironic_dnsmasq_interface: "{{ network_interface }}"
+# The following value must be set when enabling ironic,
+# the value format is "192.168.0.10,192.168.0.100".
+#ironic_dnsmasq_dhcp_range:
+# PXE bootloader file for Ironic Inspector, relative to /tftpboot.
+#ironic_dnsmasq_boot_file: "pxelinux.0"
+
+# Configure ironic upgrade option, due to currently kolla support
+# two upgrade ways for ironic: legacy_upgrade and rolling_upgrade
+# The variable "ironic_enable_rolling_upgrade: yes" is meaning rolling_upgrade
+# were enabled and opposite
+# Rolling upgrade were enable by default
+#ironic_enable_rolling_upgrade: "yes"
+
+# List of extra kernel parameters passed to the kernel used during inspection
+#ironic_inspector_kernel_cmdline_extras: []
+
+######################################
+# Manila - Shared File Systems Options
+######################################
+# HNAS backend configuration
+#hnas_ip:
+#hnas_user:
+#hnas_password:
+#hnas_evs_id:
+#hnas_evs_ip:
+#hnas_file_system_name:
+
+################################
+# Swift - Object Storage Options
+################################
+# Swift expects block devices to be available for storage. Two types of storage
+# are supported: 1 - storage device with a special partition name and filesystem
+# label, 2 - unpartitioned disk  with a filesystem. The label of this filesystem
+# is used to detect the disk which Swift will be using.
+
+# Swift support two matching modes, valid options are [ prefix, strict ]
+#swift_devices_match_mode: "strict"
+
+# This parameter defines matching pattern: if "strict" mode was selected,
+# for swift_devices_match_mode then swift_device_name should specify the name of
+# the special swift partition for example: "KOLLA_SWIFT_DATA", if "prefix" mode was
+# selected then swift_devices_name should specify a pattern which would match to
+# filesystems' labels prepared for swift.
+#swift_devices_name: "KOLLA_SWIFT_DATA"
+
+# Configure swift upgrade option, due to currently kolla support
+# two upgrade ways for swift: legacy_upgrade and rolling_upgrade
+# The variable "swift_enable_rolling_upgrade: yes" is meaning rolling_upgrade
+# were enabled and opposite
+# Rolling upgrade were enable by default
+#swift_enable_rolling_upgrade: "yes"
+
+
+################################################
+# Tempest - The OpenStack Integration Test Suite
+################################################
+# The following values must be set when enabling tempest
+#tempest_image_id:
+#tempest_flavor_ref_id:
+#tempest_public_network_id:
+#tempest_floating_network_name:
+
+# tempest_image_alt_id: "{{ tempest_image_id }}"
+# tempest_flavor_ref_alt_id: "{{ tempest_flavor_ref_id }}"
+
+###################################
+# VMware - OpenStack VMware support
+###################################
+#vmware_vcenter_host_ip:
+#vmware_vcenter_host_username:
+#vmware_vcenter_host_password:
+#vmware_datastore_name:
+#vmware_vcenter_name:
+#vmware_vcenter_cluster_name:
+
+############
+# Prometheus
+############
+#enable_prometheus_server: "{{ enable_prometheus | bool }}"
+#enable_prometheus_haproxy_exporter: "{{ enable_haproxy | bool }}"
+#enable_prometheus_mysqld_exporter: "{{ enable_mariadb | bool }}"
+#enable_prometheus_node_exporter: "{{ enable_prometheus | bool }}"
+#enable_prometheus_cadvisor: "{{ enable_prometheus | bool }}"
+#enable_prometheus_memcached: "{{ enable_prometheus | bool }}"
+#enable_prometheus_alertmanager: "{{ enable_prometheus | bool }}"
+#enable_prometheus_ceph_mgr_exporter: "no"
+#enable_prometheus_openstack_exporter: "{{ enable_prometheus | bool }}"
+#enable_prometheus_elasticsearch_exporter: "{{ enable_prometheus | bool and enable_elasticsearch | bool }}"
+#enable_prometheus_blackbox_exporter: "{{ enable_prometheus | bool }}"
+
+# List of extra parameters passed to prometheus. You can add as many to the list.
+#prometheus_cmdline_extras:
+
+# Example of setting endpoints for prometheus ceph mgr exporter.
+# You should add all ceph mgr's in your external ceph deployment.
+#prometheus_ceph_mgr_exporter_endpoints:
+#  - host1:port1
+#  - host2:port2
+
+#########
+# Freezer
+#########
+# Freezer can utilize two different database backends, elasticsearch or mariadb.
+# Elasticsearch is preferred, however it is not compatible with the version deployed
+# by kolla-ansible. You must first setup an external elasticsearch with 2.3.0.
+# By default, kolla-ansible deployed mariadb is the used database backend.
+#freezer_database_backend: "mariadb"
+
+##########
+# Telegraf
+##########
+# Configure telegraf to use the docker daemon itself as an input for
+# telemetry data.
+#telegraf_enable_docker_input: "no"
+
+##########################################
+# Octavia - openstack loadbalancer Options
+##########################################
+# Whether to run Kolla-Ansible's automatic configuration for Octavia.
+# NOTE: if you upgrade from Ussuri, you must set `octavia_auto_configure` to `no`
+# and keep your other Octavia config like before.
+#octavia_auto_configure: yes
+
+# Octavia amphora flavor.
+# See os_nova_flavor for details. Supported parameters:
+# - flavorid (optional)
+# - is_public (optional)
+# - name
+# - vcpus
+# - ram
+# - disk
+# - ephemeral (optional)
+# - swap (optional)
+# - extra_specs (optional)
+#octavia_amp_flavor:
+#  name: "amphora"
+#  is_public: no
+#  vcpus: 1
+#  ram: 1024
+#  disk: 5
+
+# Octavia security groups. lb-mgmt-sec-grp is for amphorae.
+#octavia_amp_security_groups:
+#    mgmt-sec-grp:
+#      name: "lb-mgmt-sec-grp"
+#      rules:
+#        - protocol: icmp
+#        - protocol: tcp
+#          src_port: 22
+#          dst_port: 22
+#        - protocol: tcp
+#          src_port: "{{ octavia_amp_listen_port }}"
+#          dst_port: "{{ octavia_amp_listen_port }}"
+
+# Octavia management network.
+# See os_network and os_subnet for details. Supported parameters:
+# - external (optional)
+# - mtu (optional)
+# - name
+# - provider_network_type (optional)
+# - provider_physical_network (optional)
+# - provider_segmentation_id (optional)
+# - shared (optional)
+# - subnet
+# The subnet parameter has the following supported parameters:
+# - allocation_pool_start (optional)
+# - allocation_pool_end (optional)
+# - cidr
+# - enable_dhcp (optional)
+# - gateway_ip (optional)
+# - name
+# - no_gateway_ip (optional)
+#octavia_amp_network:
+#  name: lb-mgmt-net
+#  shared: false
+#  subnet:
+#    name: lb-mgmt-subnet
+#    cidr: "{{ octavia_amp_network_cidr }}"
+#    no_gateway_ip: yes
+#    enable_dhcp: yes
+
+# Octavia management network subnet CIDR.
+#octavia_amp_network_cidr: 10.0.0.0/24
+
+#octavia_amp_image_tag: "amphora"
+
+# Load balancer topology options are [ SINGLE, ACTIVE_STANDBY ]
+#octavia_loadbalancer_topology: "SINGLE"
+
+# The following variables are ignored as along as `octavia_auto_configure` is set to `yes`.
+#octavia_amp_image_owner_id:
+#octavia_amp_boot_network_list:
+#octavia_amp_secgroup_list:
+#octavia_amp_flavor_id: