Martin Bobčík mbobcik

Configuring the Digispark ATTINY85 board for Arduino IDE and upgrading the bootloader

Warning: this document has to be updated by pointing to https://github.com/SpenceKonde/ATTinyCore

This note describes the configuration of an ATtiny85 based microcontroller development board named Digispark and similar to the Arduino line. It is available in many online marketplaces for roughly 1 dollar (e.g., Ebay, Amazon, AliExpress) and is shipped fully assembled, including a V-USB interface (a software-only implementation of a low-speed USB device for Atmel's AVR microcontrollers). Coding is similar to Arduino: it uses the familiar Arduino IDE and is already provided with a ready-to-use bootloader (

	export default [
	"Reticulating splines...",
	"Generating witty dialog...",
	"Swapping time and space...",
	"Spinning violently around the y-axis...",
	"Tokenizing real life...",
	"Bending the spoon...",
	"Filtering morale...",
	"Don't think of purple hippos...",
	"We need a new fuse...",

	// XPath CheatSheet
	// To test XPath in your Chrome Debugger: $x('/html/body')
	// http://www.jittuu.com/2012/2/14/Testing-XPath-In-Chrome/


	// 0. XPath Examples.
	// More: http://xpath.alephzarro.com/content/cheatsheet.html


	'//hr[@class="edge" and position()=1]' // every first hr of 'edge' class

	ಠ_ಠ
	<\|>
	/ω\