Skip to content

Instantly share code, notes, and snippets.

@mvlsqz

mvlsqz/kitty.conf

Last active November 22, 2022 23:37
Show Gist options
  • Save mvlsqz/17d133be67ba2ee4c196e320aab5545c to your computer and use it in GitHub Desktop.
Save mvlsqz/17d133be67ba2ee4c196e320aab5545c to your computer and use it in GitHub Desktop.
Download ZIP

Revisions

  1. mvlsqz revised this gist Nov 22, 2022. 1 changed file with 46 additions and 90 deletions.
    136 changes: 46 additions & 90 deletions kitty.conf
    View file
    Original file line number Diff line number Diff line change
    @@ -19,11 +19,11 @@
    #: etc. For example::

    font_family Hasklug Nerd Font
    bold_font Hasklug Nerd Font
    bold_font Iosevka Term Extrabold Extended Oblique
    italic_font Hasklug Nerd Font
    bold_italic_font Hasklug Nerd Font

    font_size 18.0
    font_size 20.0

    #: Font size (in pts)

    @@ -161,7 +161,7 @@ disable_ligatures cursor
    #: with the background color of the cell underneath instead, use the
    #: special keyword: background

    cursor_shape underline
    cursor_shape beam

    #: The cursor shape can be one of (block, beam, underline)

    @@ -401,9 +401,10 @@ enable_audio_bell no

    #: Window layout {{{

    # remember_window_size yes
    # initial_window_width 640
    # initial_window_height 400
    remember_window_size yes
    # Current: 57 rows 191 cols
    initial_window_width 640
    initial_window_height 400

    #: If enabled, the window size will be remembered so that new
    #: instances of kitty will have the same size as the previous
    @@ -412,7 +413,22 @@ enable_audio_bell no
    #: suffix of "c" on the width/height values to have them interpreted
    #: as number of cells instead of pixels.

    enabled_layouts grid
    enabled_layouts splits:split_axis=horizontal
    # map f1 new_window_with_cwd --location=vsplit
    map f4 launch --location=split --cwd=current
    map f5 launch --location=hsplit --cwd=current
    map f6 launch --location=vsplit --cwd=current
    map f7 layout_action rotate
    map shift+up move_window up
    map shift+left move_window left
    map shift+right move_window right
    map shift+down move_window right

    # Switch focus to the neighboring window in the indicated direction
    map ctrl+left neighboring_window left
    map ctrl+right neighboring_window right
    map ctrl+up neighboring_window up
    map ctrl+down neighboring_window down

    #: The enabled window layouts. A comma separated list of layout names.
    #: The special value all means all layouts. The first listed layout
    @@ -459,14 +475,14 @@ enabled_layouts grid
    #: values set top, horizontal and bottom. Four values set top, right,
    #: bottom and left.

    window_padding_width 1
    window_padding_width 0 15 0 15

    #: The window padding (in pts) (blank area between the text and the
    #: window border). A single value sets all four sides. Two values set
    #: the vertical and horizontal sides. Three values set top, horizontal
    #: and bottom. Four values set top, right, bottom and left.

    # placement_strategy center
    placement_strategy center

    #: When the window size is not an exact multiple of the cell size, the
    #: cell area of the terminal window will have some extra padding on
    @@ -534,89 +550,31 @@ hide_window_decorations titlebar-only

    #: }}}

    #: Tab bar {{{

    tab_bar_edge bottom

    #: Which edge to show the tab bar on, top or bottom

    tab_bar_margin_width 1.5

    #: The margin to the left and right of the tab bar (in pts)

    tab_bar_style separator
    tab_separator " ┇"

    #: The tab bar style, can be one of: fade, separator, powerline, or
    #: hidden. In the fade style, each tab's edges fade into the
    #: background color, in the separator style, tabs are separated by a
    #: configurable separator, and the powerline shows the tabs as a
    #: continuous line. If you use the hidden style, you might want to
    #: create a mapping for the select_tab action which presents you with
    #: a list of tabs and allows for easy switching to a tab.

    tab_bar_min_tabs 2

    #: The minimum number of tabs that must exist before the tab bar is
    #: shown

    tab_switch_strategy previous

    #: The algorithm to use when switching to a tab when the current tab
    #: is closed. The default of previous will switch to the last used
    #: tab. A value of left will switch to the tab to the left of the
    #: closed tab. A value of right will switch to the tab to the right of
    #: the closed tab. A value of last will switch to the right-most tab.

    # tab_fade 0.25 0.5 0.75 1

    #: Control how each tab fades into the background when using fade for
    #: the tab_bar_style. Each number is an alpha (between zero and one)
    #: that controls how much the corresponding cell fades into the
    #: background, with zero being no fade and one being full fade. You
    #: can change the number of cells used by adding/removing entries to
    #: this list.

    tab_separator " ┇"

    #: The separator between tabs in the tab bar when using separator as
    #: the tab_bar_style.

    tab_activity_symbol none

    #: Some text or a unicode symbol to show on the tab if a window in the
    #: tab that does not have focus has some activity.

    tab_title_template "{title}"

    #: A template to render the tab title. The default just renders the
    #: title. If you wish to include the tab-index as well, use something
    #: like: {index}: {title}. Useful if you have shortcuts mapped for
    #: goto_tab N. In addition you can use {layout_name} for the current
    #: layout name and {num_windows} for the number of windows in the tab.
    #: Note that formatting is done by Python's string formatting
    #: machinery, so you can use, for instance, {layout_name[:2].upper()}
    #: to show only the first two letters of the layout name, upper-cased.
    #: If you want to style the text, you can use styling directives, for
    #: example: {fmt.fg.red}red{fmt.fg.default}normal{fmt.bg._00FF00}green
    #: bg{fmt.bg.normal}. Similarly, for bold and italic:
    #: {fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}.

    active_tab_title_template "{index}: {title} ({num_windows})"

    #: Template to use for active tabs, if not specified falls back to
    #: tab_title_template.

    #: }}}

    # --[ tabs ] --------------------------------------------------------------- {{{
    # fade, slant, separator, powerline (slanted, angled, round), custom
    tab_bar_style custom
    tab_separator ""
    # REF: https://github.com/kovidgoyal/kitty/discussions/4447
    tab_fade 0 0 0 0
    tab_title_template "{fmt.fg._415c6d}{fmt.bg.default} ○ {index}:{f'{title[:6]}…{title[-6:]}' if title.rindex(title[-1]) + 1 > 25 else title}{' []' if layout_name == 'stack' else ''} "
    active_tab_title_template "{fmt.fg._83b6af}{fmt.bg.default} 綠{index}:{f'{title[:6]}…{title[-6:]}' if title.rindex(title[-1]) + 1 > 25 else title}{' []' if layout_name == 'stack' else ''} "
    tab_activity_symbol none
    tab_bar_edge top
    tab_bar_margin_height 0.0 0.0
    active_tab_font_style bold-italic
    inactive_tab_font_style normal
    tab_bar_min_tabs 2
    bell_on_tab no
    # or "🔔 "
    #}}}
    #: Color scheme {{{

    # foreground #dddddd
    # background #000000

    #: The foreground and background colors

    background_opacity 1
    background_opacity 0.98

    #: The opacity of the background. A number between 0 and 1, where 1 is
    #: opaque and 0 is fully transparent. This will only work if
    @@ -757,7 +715,7 @@ dim_opacity 0.75

    #: Advanced {{{

    # shell .
    # shell /opt/homebrew/bin/fish

    #: The shell program to execute. The default value of . means to use
    #: whatever shell is set as the default shell for the current user.
    @@ -828,7 +786,7 @@ allow_remote_control yes
    #: available update. The default is to check every 24 hrs, set to zero
    #: to disable.

    # startup_session none
    startup_session ~/.config/kitty/def-session.conf

    #: Path to a session file to use for all kitty instances. Can be
    #: overridden by using the kitty --session command line option for
    @@ -1158,9 +1116,6 @@ map kitty_mod+alt+t set_tab_title

    #: Layout management {{{

    map F5 launch --location=vsplit
    map F6 launch --location=hsplit

    #: map ctrl+shift+l next_layout
    #: map ctrl+alt+t goto_layout tall

    @@ -1314,6 +1269,7 @@ map kitty_mod+s set_background_opacity -0.05
    map kitty_mod+o set_background_opacity 1
    # Reset background opacity
    map kitty_mod+g set_background_opacity default
    # Open window logged into the ssh currently running

    # }}}

  2. mvlsqz revised this gist May 12, 2022. 1 changed file with 31 additions and 0 deletions.
    31 changes: 31 additions & 0 deletions gistfile1.txt
    View file
    Original file line number Diff line number Diff line change
    @@ -0,0 +1,31 @@
    source ~/.antigen.zsh

    antigen use oh-my-zsh

    antigen bundle git
    antigen bundle pip
    antigen bundle command-not-found
    if [ "${OSTYPE}"="darwin18.0" ]
    then
    antigen bundle osx
    fi
    antigen bundle vagrant
    antigen bundle zsh-users/zsh-syntax-highlighting
    antigen bundle zsh-users/zsh-history-substring-search

    antigen theme romkatv/powerlevel10k

    # To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
    [[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh

    export VISUAL=nvim
    export EDITOR="${VISUAL}"

    alias cat=bat
    alias ls=exa
    alias vim=nvim
    alias nvim="CC=gcc-11 nvim"

    eval "$(jenv init -)"

    antigen apply
  3. mvlsqz created this gist May 12, 2022.
    1,322 changes: 1,322 additions & 0 deletions kitty.conf
    View file
    Original file line number Diff line number Diff line change
    @@ -0,0 +1,1322 @@
    # vim:fileencoding=utf-8:ft=conf:foldmethod=marker

    #: Fonts {{{

    #: kitty has very powerful font management. You can configure
    #: individual font faces and even specify special fonts for particular
    #: characters.

    # font_family monospace
    # bold_font auto
    # italic_font auto
    # bold_italic_font auto

    #: You can specify different fonts for the bold/italic/bold-italic
    #: variants. To get a full list of supported fonts use the `kitty
    #: list-fonts` command. By default they are derived automatically, by
    #: the OSes font system. Setting them manually is useful for font
    #: families that have many weight variants like Book, Medium, Thick,
    #: etc. For example::

    font_family Hasklug Nerd Font
    bold_font Hasklug Nerd Font
    italic_font Hasklug Nerd Font
    bold_italic_font Hasklug Nerd Font

    font_size 18.0

    #: Font size (in pts)

    # force_ltr no

    #: kitty does not support BIDI (bidirectional text), however, for RTL
    #: scripts, words are automatically displayed in RTL. That is to say,
    #: in an RTL script, the words "HELLO WORLD" display in kitty as
    #: "WORLD HELLO", and if you try to select a substring of an RTL-
    #: shaped string, you will get the character that would be there had
    #: the the string been LTR. For example, assuming the Hebrew word
    #: ירושלים, selecting the character that on the screen appears to be ם
    #: actually writes into the selection buffer the character י.

    #: kitty's default behavior is useful in conjunction with a filter to
    #: reverse the word order, however, if you wish to manipulate RTL
    #: glyphs, it can be very challenging to work with, so this option is
    #: provided to turn it off. Furthermore, this option can be used with
    #: the command line program GNU FriBidi
    #: <https://github.com/fribidi/fribidi#executable> to get BIDI
    #: support, because it will force kitty to always treat the text as
    #: LTR, which FriBidi expects for terminals.

    # adjust_line_height 0
    # adjust_column_width 0

    #: Change the size of each character cell kitty renders. You can use
    #: either numbers, which are interpreted as pixels or percentages
    #: (number followed by %), which are interpreted as percentages of the
    #: unmodified values. You can use negative pixels or percentages less
    #: than 100% to reduce sizes (but this might cause rendering
    #: artifacts).

    # symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols

    #: Map the specified unicode codepoints to a particular font. Useful
    #: if you need special rendering for some symbols, such as for
    #: Powerline. Avoids the need for patched fonts. Each unicode code
    #: point is specified in the form U+<code point in hexadecimal>. You
    #: can specify multiple code points, separated by commas and ranges
    #: separated by hyphens. symbol_map itself can be specified multiple
    #: times. Syntax is::

    #: symbol_map codepoints Font Family Name

    disable_ligatures cursor

    #: Choose how you want to handle multi-character ligatures. The
    #: default is to always render them. You can tell kitty to not render
    #: them when the cursor is over them by using cursor to make editing
    #: easier, or have kitty never render them at all by using always, if
    #: you don't like them. The ligature strategy can be set per-window
    #: either using the kitty remote control facility or by defining
    #: shortcuts for it in kitty.conf, for example::

    #: map alt+1 disable_ligatures_in active always
    #: map alt+2 disable_ligatures_in all never
    #: map alt+3 disable_ligatures_in tab cursor

    #: Note that this refers to programming ligatures, typically
    #: implemented using the calt OpenType feature. For disabling general
    #: ligatures, use the font_features setting.

    # font_features none

    #: Choose exactly which OpenType features to enable or disable. This
    #: is useful as some fonts might have features worthwhile in a
    #: terminal. For example, Fira Code Retina includes a discretionary
    #: feature, zero, which in that font changes the appearance of the
    #: zero (0), to make it more easily distinguishable from Ø. Fira Code
    #: Retina also includes other discretionary features known as
    #: Stylistic Sets which have the tags ss01 through ss20.

    #: Note that this code is indexed by PostScript name, and not the font
    #: family. This allows you to define very precise feature settings;
    #: e.g. you can disable a feature in the italic font but not in the
    #: regular font.

    #: On Linux, these are read from the FontConfig database first and
    #: then this, setting is applied, so they can be configured in a
    #: single, central place.

    #: To get the PostScript name for a font, use kitty + list-fonts
    #: --psnames:

    #: .. code-block:: sh

    #: $ kitty + list-fonts --psnames | grep Fira
    #: Fira Code
    #: Fira Code Bold (FiraCode-Bold)
    #: Fira Code Light (FiraCode-Light)
    #: Fira Code Medium (FiraCode-Medium)
    #: Fira Code Regular (FiraCode-Regular)
    #: Fira Code Retina (FiraCode-Retina)

    #: The part in brackets is the PostScript name.

    #: Enable alternate zero and oldstyle numerals::

    #: font_features FiraCode-Retina +zero +onum

    #: Enable only alternate zero::

    #: font_features FiraCode-Retina +zero

    #: Disable the normal ligatures, but keep the calt feature which (in
    #: this font) breaks up monotony::

    #: font_features TT2020StyleB-Regular -liga +calt

    #: In conjunction with force_ltr, you may want to disable Arabic
    #: shaping entirely, and only look at their isolated forms if they
    #: show up in a document. You can do this with e.g.::

    #: font_features UnifontMedium +isol -medi -fina -init

    # box_drawing_scale 0.001, 1, 1.5, 2

    #: Change the sizes of the lines used for the box drawing unicode
    #: characters These values are in pts. They will be scaled by the
    #: monitor DPI to arrive at a pixel value. There must be four values
    #: corresponding to thin, normal, thick, and very thick lines.

    #: }}}

    #: Cursor customization {{{

    # cursor #cccccc

    #: Default cursor color

    # cursor_text_color #111111

    #: Choose the color of text under the cursor. If you want it rendered
    #: with the background color of the cell underneath instead, use the
    #: special keyword: background

    cursor_shape underline

    #: The cursor shape can be one of (block, beam, underline)

    # cursor_beam_thickness 1.5

    #: Defines the thickness of the beam cursor (in pts)

    # cursor_underline_thickness 2.0

    #: Defines the thickness of the underline cursor (in pts)

    cursor_blink_interval -1

    #: The interval (in seconds) at which to blink the cursor. Set to zero
    #: to disable blinking. Negative values mean use system default. Note
    #: that numbers smaller than repaint_delay will be limited to
    #: repaint_delay.

    # cursor_stop_blinking_after 15.0

    #: Stop blinking cursor after the specified number of seconds of
    #: keyboard inactivity. Set to zero to never stop blinking.

    #: }}}

    #: Scrollback {{{

    scrollback_lines 5000

    #: Number of lines of history to keep in memory for scrolling back.
    #: Memory is allocated on demand. Negative numbers are (effectively)
    #: infinite scrollback. Note that using very large scrollback is not
    #: recommended as it can slow down performance of the terminal and
    #: also use large amounts of RAM. Instead, consider using
    #: scrollback_pager_history_size.

    # scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER

    #: Program with which to view scrollback in a new window. The
    #: scrollback buffer is passed as STDIN to this program. If you change
    #: it, make sure the program you use can handle ANSI escape sequences
    #: for colors and text formatting. INPUT_LINE_NUMBER in the command
    #: line above will be replaced by an integer representing which line
    #: should be at the top of the screen. Similarly CURSOR_LINE and
    #: CURSOR_COLUMN will be replaced by the current cursor position.

    # scrollback_pager_history_size 0

    #: Separate scrollback history size, used only for browsing the
    #: scrollback buffer (in MB). This separate buffer is not available
    #: for interactive scrolling but will be piped to the pager program
    #: when viewing scrollback buffer in a separate window. The current
    #: implementation stores the data in UTF-8, so approximatively 10000
    #: lines per megabyte at 100 chars per line, for pure ASCII text,
    #: unformatted text. A value of zero or less disables this feature.
    #: The maximum allowed size is 4GB.

    # wheel_scroll_multiplier 5.0

    #: Modify the amount scrolled by the mouse wheel. Note this is only
    #: used for low precision scrolling devices, not for high precision
    #: scrolling on platforms such as macOS and Wayland. Use negative
    #: numbers to change scroll direction.

    # touch_scroll_multiplier 1.0

    #: Modify the amount scrolled by a touchpad. Note this is only used
    #: for high precision scrolling devices on platforms such as macOS and
    #: Wayland. Use negative numbers to change scroll direction.

    #: }}}

    #: Mouse {{{

    mouse_hide_wait -1

    #: Hide mouse cursor after the specified number of seconds of the
    #: mouse not being used. Set to zero to disable mouse cursor hiding.
    #: Set to a negative value to hide the mouse cursor immediately when
    #: typing text. Disabled by default on macOS as getting it to work
    #: robustly with the ever-changing sea of bugs that is Cocoa is too
    #: much effort.

    # url_color #0087bd
    # url_style curly

    #: The color and style for highlighting URLs on mouse-over. url_style
    #: can be one of: none, single, double, curly

    # open_url_modifiers kitty_mod

    #: The modifier keys to press when clicking with the mouse on URLs to
    #: open the URL

    # open_url_with default

    #: The program with which to open URLs that are clicked on. The
    #: special value default means to use the operating system's default
    #: URL handler.

    # url_prefixes http https file ftp

    #: The set of URL prefixes to look for when detecting a URL under the
    #: mouse cursor.

    # detect_urls yes

    #: Detect URLs under the mouse. Detected URLs are highlighted with an
    #: underline and the mouse cursor becomes a hand over them. Even if
    #: this option is disabled, URLs are still clickable.

    # copy_on_select no

    #: Copy to clipboard or a private buffer on select. With this set to
    #: clipboard, simply selecting text with the mouse will cause the text
    #: to be copied to clipboard. Useful on platforms such as macOS that
    #: do not have the concept of primary selections. You can instead
    #: specify a name such as a1 to copy to a private kitty buffer
    #: instead. Map a shortcut with the paste_from_buffer action to paste
    #: from this private buffer. For example::

    #: map cmd+shift+v paste_from_buffer a1

    #: Note that copying to the clipboard is a security risk, as all
    #: programs, including websites open in your browser can read the
    #: contents of the system clipboard.

    strip_trailing_spaces smart

    #: Remove spaces at the end of lines when copying to clipboard. A
    #: value of smart will do it when using normal selections, but not
    #: rectangle selections. always will always do it.

    # rectangle_select_modifiers ctrl+alt

    #: The modifiers to use rectangular selection (i.e. to select text in
    #: a rectangular block with the mouse)

    # terminal_select_modifiers shift

    #: The modifiers to override mouse selection even when a terminal
    #: application has grabbed the mouse

    # select_by_word_characters @-./_~?&=%+#

    #: Characters considered part of a word when double clicking. In
    #: addition to these characters any character that is marked as an
    #: alphanumeric character in the unicode database will be matched.

    # click_interval -1.0

    #: The interval between successive clicks to detect double/triple
    #: clicks (in seconds). Negative numbers will use the system default
    #: instead, if available, or fallback to 0.5.

    # focus_follows_mouse no

    #: Set the active window to the window under the mouse when moving the
    #: mouse around

    # pointer_shape_when_grabbed arrow

    #: The shape of the mouse pointer when the program running in the
    #: terminal grabs the mouse. Valid values are: arrow, beam and hand

    # default_pointer_shape beam

    #: The default shape of the mouse pointer. Valid values are: arrow,
    #: beam and hand

    # pointer_shape_when_dragging beam

    #: The default shape of the mouse pointer when dragging across text.
    #: Valid values are: arrow, beam and hand

    #: }}}

    #: Performance tuning {{{

    # repaint_delay 10

    #: Delay (in milliseconds) between screen updates. Decreasing it,
    #: increases frames-per-second (FPS) at the cost of more CPU usage.
    #: The default value yields ~100 FPS which is more than sufficient for
    #: most uses. Note that to actually achieve 100 FPS you have to either
    #: set sync_to_monitor to no or use a monitor with a high refresh
    #: rate. Also, to minimize latency when there is pending input to be
    #: processed, repaint_delay is ignored.

    # input_delay 3

    #: Delay (in milliseconds) before input from the program running in
    #: the terminal is processed. Note that decreasing it will increase
    #: responsiveness, but also increase CPU usage and might cause flicker
    #: in full screen programs that redraw the entire screen on each loop,
    #: because kitty is so fast that partial screen updates will be drawn.

    sync_to_monitor yes

    #: Sync screen updates to the refresh rate of the monitor. This
    #: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing)
    #: when scrolling. However, it limits the rendering speed to the
    #: refresh rate of your monitor. With a very high speed mouse/high
    #: keyboard repeat rate, you may notice some slight input latency. If
    #: so, set this to no.

    #: }}}

    #: Terminal bell {{{

    enable_audio_bell no

    #: Enable/disable the audio bell. Useful in environments that require
    #: silence.

    # visual_bell_duration 0.0

    #: Visual bell duration. Flash the screen when a bell occurs for the
    #: specified number of seconds. Set to zero to disable.

    # window_alert_on_bell yes

    #: Request window attention on bell. Makes the dock icon bounce on
    #: macOS or the taskbar flash on linux.

    # bell_on_tab yes

    #: Show a bell symbol on the tab if a bell occurs in one of the
    #: windows in the tab and the window is not the currently focused
    #: window

    # command_on_bell none

    #: Program to run when a bell occurs.

    #: }}}

    #: Window layout {{{

    # remember_window_size yes
    # initial_window_width 640
    # initial_window_height 400

    #: If enabled, the window size will be remembered so that new
    #: instances of kitty will have the same size as the previous
    #: instance. If disabled, the window will initially have size
    #: configured by initial_window_width/height, in pixels. You can use a
    #: suffix of "c" on the width/height values to have them interpreted
    #: as number of cells instead of pixels.

    enabled_layouts grid

    #: The enabled window layouts. A comma separated list of layout names.
    #: The special value all means all layouts. The first listed layout
    #: will be used as the startup layout. Default configuration is all
    #: layouts in alphabetical order. For a list of available layouts, see
    #: the https://sw.kovidgoyal.net/kitty/index.html#layouts.

    # window_resize_step_cells 2
    # window_resize_step_lines 2

    #: The step size (in units of cell width/cell height) to use when
    #: resizing windows. The cells value is used for horizontal resizing
    #: and the lines value for vertical resizing.

    # window_border_width 0.5pt

    #: The width of window borders. Can be either in pixels (px) or pts
    #: (pt). Values in pts will be rounded to the nearest number of pixels
    #: based on screen resolution. If not specified the unit is assumed to
    #: be pts. Note that borders are displayed only when more than one
    #: window is visible. They are meant to separate multiple windows.

    # draw_minimal_borders yes

    #: Draw only the minimum borders needed. This means that only the
    #: minimum needed borders for inactive windows are drawn. That is only
    #: the borders that separate the inactive window from a neighbor. Note
    #: that setting a non-zero window margin overrides this and causes all
    #: borders to be drawn.

    # window_margin_width 0

    #: The window margin (in pts) (blank area outside the border). A
    #: single value sets all four sides. Two values set the vertical and
    #: horizontal sides. Three values set top, horizontal and bottom. Four
    #: values set top, right, bottom and left.

    # single_window_margin_width -1

    #: The window margin (in pts) to use when only a single window is
    #: visible. Negative values will cause the value of
    #: window_margin_width to be used instead. A single value sets all
    #: four sides. Two values set the vertical and horizontal sides. Three
    #: values set top, horizontal and bottom. Four values set top, right,
    #: bottom and left.

    window_padding_width 1

    #: The window padding (in pts) (blank area between the text and the
    #: window border). A single value sets all four sides. Two values set
    #: the vertical and horizontal sides. Three values set top, horizontal
    #: and bottom. Four values set top, right, bottom and left.

    # placement_strategy center

    #: When the window size is not an exact multiple of the cell size, the
    #: cell area of the terminal window will have some extra padding on
    #: the sides. You can control how that padding is distributed with
    #: this option. Using a value of center means the cell area will be
    #: placed centrally. A value of top-left means the padding will be on
    #: only the bottom and right edges.

    active_border_color #21252a

    #: The color for the border of the active window. Set this to none to
    #: not draw borders around the active window.

    inactive_border_color #282c34

    #: The color for the border of inactive windows

    # bell_border_color #ff5a00

    #: The color for the border of inactive windows in which a bell has
    #: occurred

    inactive_text_alpha 0.8

    #: Fade the text in inactive windows by the specified amount (a number
    #: between zero and one, with zero being fully faded).

    hide_window_decorations titlebar-only

    #: Hide the window decorations (title-bar and window borders) with
    #: yes. On macOS, titlebar-only can be used to only hide the titlebar.
    #: Whether this works and exactly what effect it has depends on the
    #: window manager/operating system.

    # resize_debounce_time 0.1

    #: The time (in seconds) to wait before redrawing the screen when a
    #: resize event is received. On platforms such as macOS, where the
    #: operating system sends events corresponding to the start and end of
    #: a resize, this number is ignored.

    # resize_draw_strategy static

    #: Choose how kitty draws a window while a resize is in progress. A
    #: value of static means draw the current window contents, mostly
    #: unchanged. A value of scale means draw the current window contents
    #: scaled. A value of blank means draw a blank window. A value of size
    #: means show the window size in cells.

    # resize_in_steps no

    #: Resize the OS window in steps as large as the cells, instead of
    #: with the usual pixel accuracy. Combined with an
    #: initial_window_width and initial_window_height in number of cells,
    #: this option can be used to keep the margins as small as possible
    #: when resizing the OS window. Note that this does not currently work
    #: on Wayland.

    # confirm_os_window_close 0

    #: Ask for confirmation when closing an OS window or a tab that has at
    #: least this number of kitty windows in it. A value of zero disables
    #: confirmation. This confirmation also applies to requests to quit
    #: the entire application (all OS windows, via the quit action).

    #: }}}

    #: Tab bar {{{

    tab_bar_edge bottom

    #: Which edge to show the tab bar on, top or bottom

    tab_bar_margin_width 1.5

    #: The margin to the left and right of the tab bar (in pts)

    tab_bar_style separator
    tab_separator " ┇"

    #: The tab bar style, can be one of: fade, separator, powerline, or
    #: hidden. In the fade style, each tab's edges fade into the
    #: background color, in the separator style, tabs are separated by a
    #: configurable separator, and the powerline shows the tabs as a
    #: continuous line. If you use the hidden style, you might want to
    #: create a mapping for the select_tab action which presents you with
    #: a list of tabs and allows for easy switching to a tab.

    tab_bar_min_tabs 2

    #: The minimum number of tabs that must exist before the tab bar is
    #: shown

    tab_switch_strategy previous

    #: The algorithm to use when switching to a tab when the current tab
    #: is closed. The default of previous will switch to the last used
    #: tab. A value of left will switch to the tab to the left of the
    #: closed tab. A value of right will switch to the tab to the right of
    #: the closed tab. A value of last will switch to the right-most tab.

    # tab_fade 0.25 0.5 0.75 1

    #: Control how each tab fades into the background when using fade for
    #: the tab_bar_style. Each number is an alpha (between zero and one)
    #: that controls how much the corresponding cell fades into the
    #: background, with zero being no fade and one being full fade. You
    #: can change the number of cells used by adding/removing entries to
    #: this list.

    tab_separator " ┇"

    #: The separator between tabs in the tab bar when using separator as
    #: the tab_bar_style.

    tab_activity_symbol none

    #: Some text or a unicode symbol to show on the tab if a window in the
    #: tab that does not have focus has some activity.

    tab_title_template "{title}"

    #: A template to render the tab title. The default just renders the
    #: title. If you wish to include the tab-index as well, use something
    #: like: {index}: {title}. Useful if you have shortcuts mapped for
    #: goto_tab N. In addition you can use {layout_name} for the current
    #: layout name and {num_windows} for the number of windows in the tab.
    #: Note that formatting is done by Python's string formatting
    #: machinery, so you can use, for instance, {layout_name[:2].upper()}
    #: to show only the first two letters of the layout name, upper-cased.
    #: If you want to style the text, you can use styling directives, for
    #: example: {fmt.fg.red}red{fmt.fg.default}normal{fmt.bg._00FF00}green
    #: bg{fmt.bg.normal}. Similarly, for bold and italic:
    #: {fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}.

    active_tab_title_template "{index}: {title} ({num_windows})"

    #: Template to use for active tabs, if not specified falls back to
    #: tab_title_template.

    #: }}}

    #: Color scheme {{{

    # foreground #dddddd
    # background #000000

    #: The foreground and background colors

    background_opacity 1

    #: The opacity of the background. A number between 0 and 1, where 1 is
    #: opaque and 0 is fully transparent. This will only work if
    #: supported by the OS (for instance, when using a compositor under
    #: X11). Note that it only sets the background color's opacity in
    #: cells that have the same background color as the default terminal
    #: background. This is so that things like the status bar in vim,
    #: powerline prompts, etc. still look good. But it means that if you
    #: use a color theme with a background color in your editor, it will
    #: not be rendered as transparent. Instead you should change the
    #: default background color in your kitty config and not use a
    #: background color in the editor color scheme. Or use the escape
    #: codes to set the terminals default colors in a shell script to
    #: launch your editor. Be aware that using a value less than 1.0 is a
    #: (possibly significant) performance hit. If you want to dynamically
    #: change transparency of windows set dynamic_background_opacity to
    #: yes (this is off by default as it has a performance cost)

    # background_image /home/adrian/Imágenes/Wallpapers/dark-tiger.png

    #: Path to a background image. Must be in PNG format.

    # background_image_layout scaled

    #: Whether to tile or scale the background image.

    # background_image_linear no

    #: When background image is scaled, whether linear interpolation
    #: should be used.

    dynamic_background_opacity yes

    #: Allow changing of the background_opacity dynamically, using either
    #: keyboard shortcuts (increase_background_opacity and
    #: decrease_background_opacity) or the remote control facility.

    # background_tint 0.8

    #: How much to tint the background image by the background color. The
    #: tint is applied only under the text area, not margin/borders. Makes
    #: it easier to read the text. Tinting is done using the current
    #: background color for each window. This setting applies only if
    #: background_opacity is set and transparent windows are supported or
    #: background_image is set.

    dim_opacity 0.75

    #: How much to dim text that has the DIM/FAINT attribute set. One
    #: means no dimming and zero means fully dimmed (i.e. invisible).

    # selection_foreground #000000

    #: The foreground for text selected with the mouse. A value of none
    #: means to leave the color unchanged.

    # selection_background #fffacd

    #: The background for text selected with the mouse.


    #: The 16 terminal colors. There are 8 basic colors, each color has a
    #: dull and bright version. You can also set the remaining colors from
    #: the 256 color table as color16 to color255.

    # color0 #000000
    # color8 #767676

    #: black

    # color1 #cc0403
    # color9 #f2201f

    #: red

    # color2 #19cb00
    # color10 #23fd00

    #: green

    # color3 #cecb00
    # color11 #fffd00

    #: yellow

    # color4 #0d73cc
    # color12 #1a8fff

    #: blue

    # color5 #cb1ed1
    # color13 #fd28ff

    #: magenta

    # color6 #0dcdcd
    # color14 #14ffff

    #: cyan

    # color7 #dddddd
    # color15 #ffffff

    #: white

    # mark1_foreground black

    #: Color for marks of type 1

    # mark1_background #98d3cb

    #: Color for marks of type 1 (light steel blue)

    # mark2_foreground black

    #: Color for marks of type 2

    # mark2_background #f2dcd3

    #: Color for marks of type 1 (beige)

    # mark3_foreground black

    #: Color for marks of type 3

    # mark3_background #f274bc

    #: Color for marks of type 1 (violet)

    #: map kitty_mod+f1 set_colors --configured ~/.config/kitty/kitty-themes/DoomOne.conf
    #: map kitty_mod+f2 set_colors --configured ~/.config/kitty/kitty-themes/DoomBox.conf
    #: map kitty_mod+f3 set_colors --configured ~/.config/kitty/kitty-themes/gruvbox-material.conf
    #: map kitty_mod+f4 set_colors --configured ~/.config/kitty/kitty-themes/palenight.conf

    #: Change colorschemes on the fly

    #: }}}

    #: Advanced {{{

    # shell .

    #: The shell program to execute. The default value of . means to use
    #: whatever shell is set as the default shell for the current user.
    #: Note that on macOS if you change this, you might need to add
    #: --login to ensure that the shell starts in interactive mode and
    #: reads its startup rc files.

    editor nvim

    #: The console editor to use when editing the kitty config file or
    #: similar tasks. A value of . means to use the environment variables
    #: VISUAL and EDITOR in that order. Note that this environment
    #: variable has to be set not just in your shell startup scripts but
    #: system-wide, otherwise kitty will not see it.

    # close_on_child_death no

    #: Close the window when the child process (shell) exits. If no (the
    #: default), the terminal will remain open when the child exits as
    #: long as there are still processes outputting to the terminal (for
    #: example disowned or backgrounded processes). If yes, the window
    #: will close as soon as the child process exits. Note that setting it
    #: to yes means that any background processes still using the terminal
    #: can fail silently because their stdout/stderr/stdin no longer work.

    allow_remote_control yes

    #: Allow other programs to control kitty. If you turn this on other
    #: programs can control all aspects of kitty, including sending text
    #: to kitty windows, opening new windows, closing windows, reading the
    #: content of windows, etc. Note that this even works over ssh
    #: connections. You can chose to either allow any program running
    #: within kitty to control it, with yes or only programs that connect
    #: to the socket specified with the kitty --listen-on command line
    #: option, if you use the value socket-only. The latter is useful if
    #: you want to prevent programs running on a remote computer over ssh
    #: from controlling kitty.

    #: listen_on unix:@mykitty

    #: Tell kitty to listen to the specified unix/tcp socket for remote
    #: control connections. Note that this will apply to all kitty
    #: instances. It can be overridden by the kitty --listen-on command
    #: line flag. This option accepts only UNIX sockets, such as
    #: unix:${TEMP}/mykitty or (on Linux) unix:@mykitty. Environment
    #: variables are expanded. If {kitty_pid} is present then it is
    #: replaced by the PID of the kitty process, otherwise the PID of the
    #: kitty process is appended to the value, with a hyphen. This option
    #: is ignored unless you also set allow_remote_control to enable
    #: remote control. See the help for kitty --listen-on for more
    #: details.

    # env

    #: Specify environment variables to set in all child processes. Note
    #: that environment variables are expanded recursively, so if you
    #: use::

    #: env MYVAR1=a
    #: env MYVAR2=${MYVAR1}/${HOME}/b

    #: The value of MYVAR2 will be a/<path to home directory>/b.

    # update_check_interval 0.0

    #: Periodically check if an update to kitty is available. If an update
    #: is found a system notification is displayed informing you of the
    #: available update. The default is to check every 24 hrs, set to zero
    #: to disable.

    # startup_session none

    #: Path to a session file to use for all kitty instances. Can be
    #: overridden by using the kitty --session command line option for
    #: individual instances. See
    #: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty
    #: documentation for details. Note that relative paths are interpreted
    #: with respect to the kitty config directory. Environment variables
    #: in the path are expanded.

    # clipboard_control write-clipboard write-primary

    #: Allow programs running in kitty to read and write from the
    #: clipboard. You can control exactly which actions are allowed. The
    #: set of possible actions is: write-clipboard read-clipboard write-
    #: primary read-primary. You can additionally specify no-append to
    #: disable kitty's protocol extension for clipboard concatenation. The
    #: default is to allow writing to the clipboard and primary selection
    #: with concatenation enabled. Note that enabling the read
    #: functionality is a security risk as it means that any program, even
    #: one running on a remote server via SSH can read your clipboard.

    # allow_hyperlinks yes

    #: Process hyperlink (OSC 8) escape sequences. If disabled OSC 8
    #: escape sequences are ignored. Otherwise they become clickable
    #: links, that you can click by holding down ctrl+shift and clicking
    #: with the mouse. The special value of ``ask`` means that kitty will
    #: ask before opening the link.

    # term xterm-kitty

    #: The value of the TERM environment variable to set. Changing this
    #: can break many terminal programs, only change it if you know what
    #: you are doing, not because you read some advice on Stack Overflow
    #: to change it. The TERM variable is used by various programs to get
    #: information about the capabilities and behavior of the terminal. If
    #: you change it, depending on what programs you run, and how
    #: different the terminal you are changing it to is, various things
    #: from key-presses, to colors, to various advanced features may not
    #: work.

    #: }}}

    #: OS specific tweaks {{{

    # macos_titlebar_color system

    #: Change the color of the kitty window's titlebar on macOS. A value
    #: of system means to use the default system color, a value of
    #: background means to use the background color of the currently
    #: active window and finally you can use an arbitrary color, such as
    #: #12af59 or red. WARNING: This option works by using a hack, as
    #: there is no proper Cocoa API for it. It sets the background color
    #: of the entire window and makes the titlebar transparent. As such it
    #: is incompatible with background_opacity. If you want to use both,
    #: you are probably better off just hiding the titlebar with
    #: hide_window_decorations.

    # macos_option_as_alt no

    #: Use the option key as an alt key. With this set to no, kitty will
    #: use the macOS native Option+Key = unicode character behavior. This
    #: will break any Alt+key keyboard shortcuts in your terminal
    #: programs, but you can use the macOS unicode input technique. You
    #: can use the values: left, right, or both to use only the left,
    #: right or both Option keys as Alt, instead.

    # macos_hide_from_tasks no

    #: Hide the kitty window from running tasks (Option+Tab) on macOS.

    # macos_quit_when_last_window_closed no

    #: Have kitty quit when all the top-level windows are closed. By
    #: default, kitty will stay running, even with no open windows, as is
    #: the expected behavior on macOS.

    # macos_window_resizable yes

    #: Disable this if you want kitty top-level (OS) windows to not be
    #: resizable on macOS.

    # macos_thicken_font 0

    #: Draw an extra border around the font with the given width, to
    #: increase legibility at small font sizes. For example, a value of
    #: 0.75 will result in rendering that looks similar to sub-pixel
    #: antialiasing at common font sizes.

    # macos_traditional_fullscreen no

    #: Use the traditional full-screen transition, that is faster, but
    #: less pretty.

    # macos_show_window_title_in all

    #: Show or hide the window title in the macOS window or menu-bar. A
    #: value of window will show the title of the currently active window
    #: at the top of the macOS window. A value of menubar will show the
    #: title of the currently active window in the macOS menu-bar, making
    #: use of otherwise wasted space. all will show the title everywhere
    #: and none hides the title in the window and the menu-bar.

    # macos_custom_beam_cursor no

    #: Enable/disable custom mouse cursor for macOS that is easier to see
    #: on both light and dark backgrounds. WARNING: this might make your
    #: mouse cursor invisible on dual GPU machines.

    # linux_display_server auto

    #: Choose between Wayland and X11 backends. By default, an appropriate
    #: backend based on the system state is chosen automatically. Set it
    #: to x11 or wayland to force the choice.

    #: }}}

    #: Keyboard shortcuts {{{

    #: For a list of key names, see: the GLFW key macros
    #: <https://github.com/kovidgoyal/kitty/blob/master/glfw/glfw3.h#L349>.
    #: The name to use is the part after the GLFW_KEY_ prefix. For a list
    #: of modifier names, see: GLFW mods
    #: <https://www.glfw.org/docs/latest/group__mods.html>

    #: On Linux you can also use XKB key names to bind keys that are not
    #: supported by GLFW. See XKB keys
    #: <https://github.com/xkbcommon/libxkbcommon/blob/master/xkbcommon/xkbcommon-
    #: keysyms.h> for a list of key names. The name to use is the part
    #: after the XKB_KEY_ prefix. Note that you can only use an XKB key
    #: name for keys that are not known as GLFW keys.

    #: Finally, you can use raw system key codes to map keys, again only
    #: for keys that are not known as GLFW keys. To see the system key
    #: code for a key, start kitty with the kitty --debug-keyboard option.
    #: Then kitty will output some debug text for every key event. In that
    #: text look for ``native_code`` the value of that becomes the key
    #: name in the shortcut. For example:

    #: .. code-block:: none

    #: on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a'

    #: Here, the key name for the A key is 0x61 and you can use it with::

    #: map ctrl+0x61 something

    #: to map ctrl+a to something.

    #: You can use the special action no_op to unmap a keyboard shortcut
    #: that is assigned in the default configuration::

    #: map kitty_mod+space no_op

    #: You can combine multiple actions to be triggered by a single
    #: shortcut, using the syntax below::

    #: map key combine <separator> action1 <separator> action2 <separator> action3 ...

    #: For example::

    #: map kitty_mod+e combine : new_window : next_layout

    #: this will create a new window and switch to the next available
    #: layout

    #: You can use multi-key shortcuts using the syntax shown below::

    #: map key1>key2>key3 action

    #: For example::

    #: map ctrl+f>2 set_font_size 20

    # kitty_mod ctrl+shift

    #: The value of kitty_mod is used as the modifier for all default
    #: shortcuts, you can change it in your kitty.conf to change the
    #: modifiers for all the default shortcuts.

    # clear_all_shortcuts no

    #: You can have kitty remove all shortcut definition seen up to this
    #: point. Useful, for instance, to remove the default shortcuts.

    # kitten_alias hints hints --hints-offset=0

    #: You can create aliases for kitten names, this allows overriding the
    #: defaults for kitten options and can also be used to shorten
    #: repeated mappings of the same kitten with a specific group of
    #: options. For example, the above alias changes the default value of
    #: kitty +kitten hints --hints-offset to zero for all mappings,
    #: including the builtin ones.

    #: Clipboard {{{

    # map kitty_mod+c copy_to_clipboard

    #: There is also a copy_or_interrupt action that can be optionally
    #: mapped to Ctrl+c. It will copy only if there is a selection and
    #: send an interrupt otherwise. Similarly, copy_and_clear_or_interrupt
    #: will copy and clear the selection or send an interrupt if there is
    #: no selection.

    # map kitty_mod+v paste_from_clipboard
    # map kitty_mod+s paste_from_selection
    # map shift+insert paste_from_selection
    # map kitty_mod+o pass_selection_to_program

    #: You can also pass the contents of the current selection to any
    #: program using pass_selection_to_program. By default, the system's
    #: open program is used, but you can specify your own, the selection
    #: will be passed as a command line argument to the program, for
    #: example::

    #: map kitty_mod+o pass_selection_to_program firefox

    #: You can pass the current selection to a terminal program running in
    #: a new kitty window, by using the @selection placeholder::

    #: map kitty_mod+y new_window less @selection

    #: }}}

    #: Scrolling {{{

    # map kitty_mod+up scroll_line_up
    # map kitty_mod+k scroll_line_up
    # map kitty_mod+down scroll_line_down
    # map kitty_mod+j scroll_line_down
    # map kitty_mod+page_up scroll_page_up
    # map kitty_mod+page_down scroll_page_down
    # map kitty_mod+home scroll_home
    # map kitty_mod+end scroll_end
    # map kitty_mod+h show_scrollback

    #: You can pipe the contents of the current screen + history buffer as
    #: STDIN to an arbitrary program using the ``launch`` function. For
    #: example, the following opens the scrollback buffer in less in an
    #: overlay window::

    #: map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R

    #: For more details on piping screen and buffer contents to external
    #: programs, see launch.

    #: }}}

    #: Window management {{{

    # map kitty_mod+enter new_window

    #: You can open a new window running an arbitrary program, for
    #: example::

    #: map kitty_mod+y launch mutt

    #: You can open a new window with the current working directory set to
    #: the working directory of the current window using::

    #: map ctrl+alt+enter launch --cwd=current

    #: You can open a new window that is allowed to control kitty via the
    #: kitty remote control facility by prefixing the command line with @.
    #: Any programs running in that window will be allowed to control
    #: kitty. For example::

    #: map ctrl+enter launch --allow-remote-control some_program

    #: You can open a new window next to the currently active window or as
    #: the first window, with::

    #: map ctrl+n launch --location=neighbor some_program
    #: map ctrl+f launch --location=first some_program

    #: For more details, see launch.

    # map kitty_mod+n new_os_window

    #: Works like new_window above, except that it opens a top level OS
    #: kitty window. In particular you can use new_os_window_with_cwd to
    #: open a window with the current working directory.

    # map kitty_mod+w close_window
    # map kitty_mod+] next_window
    # map kitty_mod+[ previous_window
    # map kitty_mod+f move_window_forward
    # map kitty_mod+b move_window_backward
    # map kitty_mod+` move_window_to_top
    # map kitty_mod+r start_resizing_window
    # map kitty_mod+1 first_window
    # map kitty_mod+2 second_window
    # map kitty_mod+3 third_window
    # map kitty_mod+4 fourth_window
    # map kitty_mod+5 fifth_window
    # map kitty_mod+6 sixth_window
    # map kitty_mod+7 seventh_window
    # map kitty_mod+8 eighth_window
    # map kitty_mod+9 ninth_window
    # map kitty_mod+0 tenth_window
    #: }}}

    #: Tab management {{{

    map kitty_mod+right next_tab
    map kitty_mod+left previous_tab
    map kitty_mod+t new_tab
    map kitty_mod+q close_tab
    map kitty_mod+. move_tab_forward
    map kitty_mod+, move_tab_backward
    map kitty_mod+alt+t set_tab_title

    #: You can also create shortcuts to go to specific tabs, with 1 being
    #: the first tab, 2 the second tab and -1 being the previously active
    #: tab, and any number larger than the last tab being the last tab::

    #: map ctrl+alt+1 goto_tab 1
    #: map ctrl+alt+2 goto_tab 2

    #: Just as with new_window above, you can also pass the name of
    #: arbitrary commands to run when using new_tab and use
    #: new_tab_with_cwd. Finally, if you want the new tab to open next to
    #: the current tab rather than at the end of the tabs list, use::

    #: map ctrl+t new_tab !neighbor [optional cmd to run]
    #: }}}

    #: Layout management {{{

    map F5 launch --location=vsplit
    map F6 launch --location=hsplit

    #: map ctrl+shift+l next_layout
    #: map ctrl+alt+t goto_layout tall

    #: You can also create shortcuts to switch to specific layouts::

    #: map ctrl+alt+t goto_layout tall
    #: map ctrl+alt+s goto_layout stack

    #: Similarly, to switch back to the previous layout::

    #: map ctrl+alt+p last_used_layout
    #: }}}

    #: Font sizes {{{

    #: You can change the font size for all top-level kitty OS windows at
    #: a time or only the current one.

    map kitty_mod+plus change_font_size all +2.0
    map kitty_mod+minus change_font_size all -2.0
    map kitty_mod+backspace change_font_size all 0

    #: To setup shortcuts for specific font sizes::

    #: map kitty_mod+f6 change_font_size all 10.0

    #: To setup shortcuts to change only the current OS window's font
    #: size::

    #: map kitty_mod+f6 change_font_size current 10.0
    #: }}}

    #: Select and act on visible text {{{

    #: Use the hints kitten to select text and either pass it to an
    #: external program or insert it into the terminal or copy it to the
    #: clipboard.

    # map kitty_mod+e kitten hints

    #: Open a currently visible URL using the keyboard. The program used
    #: to open the URL is specified in open_url_with.

    # map kitty_mod+p>f kitten hints --type path --program -

    #: Select a path/filename and insert it into the terminal. Useful, for
    #: instance to run git commands on a filename output from a previous
    #: git command.

    # map kitty_mod+p>shift+f kitten hints --type path

    #: Select a path/filename and open it with the default open program.

    # map kitty_mod+p>l kitten hints --type line --program -

    #: Select a line of text and insert it into the terminal. Use for the
    #: output of things like: ls -1

    # map kitty_mod+p>w kitten hints --type word --program -

    #: Select words and insert into terminal.

    # map kitty_mod+p>h kitten hints --type hash --program -

    #: Select something that looks like a hash and insert it into the
    #: terminal. Useful with git, which uses sha1 hashes to identify
    #: commits

    # map kitty_mod+p>n kitten hints --type linenum

    #: Select something that looks like filename:linenum and open it in
    #: vim at the specified line number.

    # map kitty_mod+p>y kitten hints --type hyperlink

    #: Select a hyperlink (i.e. a URL that has been marked as such by the
    #: terminal program, for example, by ls --hyperlink=auto).


    #: The hints kitten has many more modes of operation that you can map
    #: to different shortcuts. For a full description see kittens/hints.
    #: }}}

    #: Miscellaneous {{{

    # map kitty_mod+f11 toggle_fullscreen
    # map kitty_mod+f10 toggle_maximized
    # map kitty_mod+u kitten unicode_input
    # map kitty_mod+f2 edit_config_file
    # map kitty_mod+escape kitty_shell window

    #: Open the kitty shell in a new window/tab/overlay/os_window to
    #: control kitty using commands.

    #: You can create shortcuts to clear/reset the terminal. For example::

    #: # Reset the terminal
    #: map kitty_mod+f9 clear_terminal reset active
    #: # Clear the terminal screen by erasing all contents
    #: map kitty_mod+f10 clear_terminal clear active
    #: # Clear the terminal scrollback by erasing it
    #: map kitty_mod+f11 clear_terminal scrollback active
    #: # Scroll the contents of the screen into the scrollback
    #: map kitty_mod+f12 clear_terminal scroll active

    #: If you want to operate on all windows instead of just the current
    #: one, use all instead of active.

    #: It is also possible to remap Ctrl+L to both scroll the current
    #: screen contents into the scrollback buffer and clear the screen,
    #: instead of just clearing the screen::

    #: map ctrl+l combine : clear_terminal scroll active : send_text normal,application \x0c


    #: You can tell kitty to send arbitrary (UTF-8) encoded text to the
    #: client program when pressing specified shortcut keys. For example::

    #: map ctrl+alt+a send_text all Special text

    #: This will send "Special text" when you press the ctrl+alt+a key
    #: combination. The text to be sent is a python string literal so you
    #: can use escapes like \x1b to send control codes or \u21fb to send
    #: unicode characters (or you can just input the unicode characters
    #: directly as UTF-8 text). The first argument to send_text is the
    #: keyboard modes in which to activate the shortcut. The possible
    #: values are normal or application or kitty or a comma separated
    #: combination of them. The special keyword all means all modes. The
    #: modes normal and application refer to the DECCKM cursor key mode
    #: for terminals, and kitty refers to the special kitty extended
    #: keyboard protocol.

    #: Another example, that outputs a word and then moves the cursor to
    #: the start of the line (same as pressing the Home key)::

    #: map ctrl+alt+a send_text normal Word\x1b[H
    #: map ctrl+alt+a send_text application Word\x1bOH

    #: }}}

    #: Custom {{{

    # open new split (window) with cmd+d retaining the cwd
    map kitty_mod+d new_window_with_cwd

    # Increase background opacity
    map kitty_mod+a set_background_opacity +0.05
    # Decrease background opacity
    map kitty_mod+s set_background_opacity -0.05
    # Make background fully opaque
    map kitty_mod+o set_background_opacity 1
    # Reset background opacity
    map kitty_mod+g set_background_opacity default

    # }}}

    # }}}

    include ./theme.conf