Neville Lynch nwlynch

Klipper mesh on print area only install guide

This macro will dymanic change the bed_mesh area based on the size of the printed part. The fw will only probe on the area that the part will be printed (plus mesh_area_offset value)

(1) Add the following macrro to your printer config, this will replace the default BED_MESH_CALIBRATE command.

	#
	# stopwords.txt
	#
	# Freely available stopword list, balancing coverage and size.
	#
	# From http://www.lextek.com/manuals/onix/stopwords1.html
	a
	about
	above
	across