@@ -0,0 +1,337 @@
=== http status codes ===================================================
1xx Informational
100 Continue
101 Switching Protocols
102 Processing (WebDAV; RFC 2518)
2xx Success
200 OK
201 Created
202 Accepted
203 Non-Authoritative Information (since HTTP/1.1)
204 No Content
205 Reset Content
206 Partial Content
207 Multi-Status (WebDAV; RFC 4918)
208 Already Reported (WebDAV; RFC 5842)
226 IM Used (RFC 3229)
3xx Redirection
300 Multiple Choices
301 Moved Permanently
302 Found
303 See Other (since HTTP/1.1)
304 Not Modified
305 Use Proxy (since HTTP/1.1)
306 Switch Proxy
307 Temporary Redirect (since HTTP/1.1)
308 Permanent Redirect (approved as experimental RFC])[11]
4xx Client Error
400 Bad Request
401 Unauthorized
402 Payment Required
403 Forbidden
404 Not Found
405 Method Not Allowed
406 Not Acceptable
407 Proxy Authentication Required
408 Request Timeout
409 Conflict
410 Gone
411 Length Required
412 Precondition Failed
413 Request Entity Too Large
414 Request-URI Too Long
415 Unsupported Media Type
416 Requested Range Not Satisfiable
417 Expectation Failed
418 I'm a teapot (RFC 2324)
420 Enhance Your Calm (Twitter)
422 Unprocessable Entity (WebDAV; RFC 4918)
423 Locked (WebDAV; RFC 4918)
424 Failed Dependency (WebDAV; RFC 4918)
424 Method Failure (WebDAV)[13]
425 Unordered Collection (Internet draft)
426 Upgrade Required (RFC 2817)
428 Precondition Required (RFC 6585)
429 Too Many Requests (RFC 6585)
431 Request Header Fields Too Large (RFC 6585)
444 No Response (Nginx)
449 Retry With (Microsoft)
450 Blocked by Windows Parental Controls (Microsoft)
451 Unavailable For Legal Reasons (Internet draft)
494 Request Header Too Large (Nginx)
495 Cert Error (Nginx)
496 No Cert (Nginx)
497 HTTP to HTTPS (Nginx)
499 Client Closed Request (Nginx)
5xx Server Error
500 Internal Server Error
501 Not Implemented
502 Bad Gateway
503 Service Unavailable
504 Gateway Timeout
505 HTTP Version Not Supported
506 Variant Also Negotiates (RFC 2295)
507 Insufficient Storage (WebDAV; RFC 4918)
508 Loop Detected (WebDAV; RFC 5842)
509 Bandwidth Limit Exceeded (Apache bw/limited extension)
510 Not Extended (RFC 2774)
511 Network Authentication Required (RFC 6585)
598 Network read timeout error (Unknown)
599 Network connect timeout error (Unknown)
=== HTTP 1.1 Methods ====================================================
OPTIONS
GET
HEAD
POST
PUT
DELETE
TRACE
CONNECT
=== nmap ================================================================
Usage: nmap [Scan Type(s)] [Options] {target specification}
TARGET SPECIFICATION:
Can pass hostnames, IP addresses, networks, etc.
Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254
-iL : Input from list of hosts/networks
-iR : Choose random targets
--exclude : Exclude hosts/networks
--excludefile : Exclude list from file
HOST DISCOVERY:
-sL: List Scan - simply list targets to scan
-sP: Ping Scan - go no further than determining if host is online
-PN: Treat all hosts as online -- skip host discovery
-PS/PA/PU/PY[portlist]: TCP SYN/ACK, UDP or SCTP discovery to given ports
-PE/PP/PM: ICMP echo, timestamp, and netmask request discovery probes
-PO[protocol list]: IP Protocol Ping
-n/-R: Never do DNS resolution/Always resolve [default: sometimes]
--dns-servers : Specify custom DNS servers
--system-dns: Use OS's DNS resolver
--traceroute: Trace hop path to each host
SCAN TECHNIQUES:
-sS/sT/sA/sW/sM: TCP SYN/Connect()/ACK/Window/Maimon scans
-sU: UDP Scan
-sN/sF/sX: TCP Null, FIN, and Xmas scans
--scanflags : Customize TCP scan flags
-sI : Idle scan
-sY/sZ: SCTP INIT/COOKIE-ECHO scans
-sO: IP protocol scan
-b : FTP bounce scan
PORT SPECIFICATION AND SCAN ORDER:
-p : Only scan specified ports
Ex: -p22; -p1-65535; -p U:53,111,137,T:21-25,80,139,8080
-F: Fast mode - Scan fewer ports than the default scan
-r: Scan ports consecutively - don't randomize
--top-ports : Scan most common ports
--port-ratio : Scan ports more common than
SERVICE/VERSION DETECTION:
-sV: Probe open ports to determine service/version info
--version-intensity : Set from 0 (light) to 9 (try all probes)
--version-light: Limit to most likely probes (intensity 2)
--version-all: Try every single probe (intensity 9)
--version-trace: Show detailed version scan activity (for debugging)
SCRIPT SCAN:
-sC: equivalent to --script=default
--script=: is a comma separated list of
directories, script-files or script-categories
--script-args=: provide arguments to scripts
--script-trace: Show all data sent and received
--script-updatedb: Update the script database.
OS DETECTION:
-O: Enable OS detection
--osscan-limit: Limit OS detection to promising targets
--osscan-guess: Guess OS more aggressively
TIMING AND PERFORMANCE:
Options which take are in milliseconds, unless you append 's'
(seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m).
-T<0-5>: Set timing template (higher is faster)
--min-hostgroup/max-hostgroup : Parallel host scan group sizes
--min-parallelism/max-parallelism : Probe parallelization
--min-rtt-timeout/max-rtt-timeout/initial-rtt-timeout : Specifies
probe round trip time.
--max-retries : Caps number of port scan probe retransmissions.
--host-timeout : Give up on target after this long
--scan-delay/--max-scan-delay : Adjust delay between probes
--min-rate : Send packets no slower than per second
--max-rate : Send packets no faster than per second
FIREWALL/IDS EVASION AND SPOOFING:
-f; --mtu : fragment packets (optionally w/given MTU)
-D : Cloak a scan with decoys
-S : Spoof source address
-e : Use specified interface
-g/--source-port : Use given port number
--data-length : Append random data to sent packets
--ip-options : Send packets with specified ip options
--ttl : Set IP time-to-live field
--spoof-mac : Spoof your MAC address
--badsum: Send packets with a bogus TCP/UDP/SCTP checksum
--adler32: Use deprecated Adler32 instead of CRC32C for SCTP checksums
OUTPUT:
-oN/-oX/-oS/-oG : Output scan in normal, XML, s|<ript kiddi3,<br="&quot;&quot;" /> and Grepable format, respectively, to the given filename.
-oA : Output in the three major formats at once
-v: Increase verbosity level (use twice or more for greater effect)
-d[level]: Set or increase debugging level (Up to 9 is meaningful)
--reason: Display the reason a port is in a particular state
--open: Only show open (or possibly open) ports
--packet-trace: Show all packets sent and received
--iflist: Print host interfaces and routes (for debugging)
--log-errors: Log errors/warnings to the normal-format output file
--append-output: Append to rather than clobber specified output files
--resume : Resume an aborted scan
--stylesheet : XSL stylesheet to transform XML output to HTML
--webxml: Reference stylesheet from Nmap.Org for more portable XML
--no-stylesheet: Prevent associating of XSL stylesheet w/XML output
MISC:
-6: Enable IPv6 scanning
-A: Enables OS detection and Version detection, Script scanning and Traceroute
--datadir : Specify custom Nmap data file location
--send-eth/--send-ip: Send using raw ethernet frames or IP packets
--privileged: Assume that the user is fully privileged
--unprivileged: Assume the user lacks raw socket privileges
-V: Print version number
-h: Print this help summary page.
EXAMPLES:
nmap -v -A scanme.nmap.org
nmap -v -sP 192.168.0.0/16 10.0.0.0/8
nmap -v -iR 10000 -PN -p 80
SEE THE MAN PAGE (http://nmap.org/book/man.html) FOR MORE OPTIONS AND EXAMPLES
=== elements of SOA and replies (dig) ===============================================
domain.com. 3553 IN SOA ns.domain.com. hostmaster.domain.com. 2012090635 3600 1800 1209600 3600
2012090635 serial
3600 refresh
1800 retry
1209600 expire
3600 minimum
www.domain.com. 3600 IN CNAME server.domain.com.
server.domain.com. 3600 IN A 193.190.130.15
3600 ttl
=== host ================================================================
Usage: host [-aCdlriTwv] [-c class] [-N ndots] [-t type] [-W time]
[-R number] [-m flag] hostname [server]
-a is equivalent to -v -t ANY
-c specifies query class for non-IN data
-C compares SOA records on authoritative nameservers
-d is equivalent to -v
-l lists all hosts in a domain, using AXFR
-i IP6.INT reverse lookups
-N changes the number of dots allowed before root lookup is done
-r disables recursive processing
-R specifies number of retries for UDP packets
-s a SERVFAIL response should stop query
-t specifies the query type
-T enables TCP/IP mode
-v enables verbose output
-w specifies to wait forever for a reply
-W specifies how long to wait for a reply
-4 use IPv4 query transport only
-6 use IPv6 query transport only
-m set memory debugging flag (trace|record|usage)
=== dig =================================================================
Usage: dig [@global-server] [domain] [q-type] [q-class] {q-opt}
{global-d-opt} host [@local-server] {local-d-opt}
[ host [@local-server] {local-d-opt} [...]]
Where: domain is in the Domain Name System
q-class is one of (in,hs,ch,...) [default: in]
q-type is one of (a,any,mx,ns,soa,hinfo,axfr,txt,...) [default:a]
(Use ixfr=version for type ixfr)
q-opt is one of:
-x dot-notation (shortcut for reverse lookups)
-i (use IP6.INT for IPv6 reverse lookups)
-f filename (batch mode)
-b address[#port] (bind to source address/port)
-p port (specify port number)
-q name (specify query name)
-t type (specify query type)
-c class (specify query class)
-k keyfile (specify tsig key file)
-y [hmac:]name:key (specify named base64 tsig key)
-4 (use IPv4 query transport only)
-6 (use IPv6 query transport only)
-m (enable memory usage debugging)
d-opt is of the form +keyword[=value], where keyword is:
+[no]vc (TCP mode)
+[no]tcp (TCP mode, alternate syntax)
+time=### (Set query timeout) [5]
+tries=### (Set number of UDP attempts) [3]
+retry=### (Set number of UDP retries) [2]
+domain=### (Set default domainname)
+bufsize=### (Set EDNS0 Max UDP packet size)
+ndots=### (Set NDOTS value)
+edns=### (Set EDNS version)
+[no]search (Set whether to use searchlist)
+[no]showsearch (Search with intermediate results)
+[no]defname (Ditto)
+[no]recurse (Recursive mode)
+[no]ignore (Don't revert to TCP for TC responses.)
+[no]fail (Don't try next server on SERVFAIL)
+[no]besteffort (Try to parse even illegal messages)
+[no]aaonly (Set AA flag in query (+[no]aaflag))
+[no]adflag (Set AD flag in query)
+[no]cdflag (Set CD flag in query)
+[no]cl (Control display of class in records)
+[no]cmd (Control display of command line)
+[no]comments (Control display of comment lines)
+[no]question (Control display of question)
+[no]answer (Control display of answer)
+[no]authority (Control display of authority)
+[no]additional (Control display of additional)
+[no]stats (Control display of statistics)
+[no]short (Disable everything except short
form of answer)
+[no]ttlid (Control display of ttls in records)
+[no]all (Set or clear all display flags)
+[no]qr (Print question before sending)
+[no]nssearch (Search all authoritative nameservers)
+[no]identify (ID responders in short answers)
+[no]trace (Trace delegation down from root)
+[no]dnssec (Request DNSSEC records)
+[no]nsid (Request Name Server ID)
+[no]multiline (Print records in an expanded format)
global d-opts and servers (before host name) affect all queries.
local d-opts and servers (after host name) affect only that lookup.
-h (print help and exit)
-v (print version and exit)
=== nc ==================================================================
usage: nc [-46DdhklnrtUuvz] [-i interval] [-p source_port]
[-s source_ip_address] [-w timeout] [-X proxy_version]
[-x proxy_address[:port]] [hostname] [port[s]]
Command Summary:
-4 Use IPv4
-6 Use IPv6
-D Enable the debug socket option
-d Detach from stdin
-h This help text
-i secs Delay interval for lines sent, ports scanned
-k Keep inbound sockets open for multiple connects
-l Listen mode, for inbound connects
-n Suppress name/port resolutions
-p port Specify local port for remote connects
-r Randomize remote ports
-s addr Local source address
-t Answer TELNET negotiation
-U Use UNIX domain socket
-u UDP mode
-v Verbose
-w secs Timeout for connects and final net reads
-X proto Proxy protocol: "4", "5" (SOCKS) or "connect"
-x addr[:port] Specify proxy address and port
-z Zero-I/O mode [used for scanning]
Port numbers can be individual or ranges: lo-hi [inclusive]
stevenswafford created this gist