sityware · March 11, 2025 09:35 · Jul 10, 2018 · Jul 10, 2018 · Jun 6, 2018 · Jun 6, 2018
diff --git a/device_info.sh b/device_info.sh
@@ -7,4 +7,9 @@ TOKEN=`grep "TokInfo" /tmp/ses_tok.xml | cut -b 10-41`
 
 curl -s -X GET "http://$MODEM_IP/api/device/information" \
 -H "Cookie: $COOKIE" -H "__RequestVerificationToken: $TOKEN" \
--H "Content-Type: text/xml"
+-H "Content-Type: text/xml"
+
+# in case of broken MTD16 (data) partition, will print out error 100002
+curl -s -X GET "http://$MODEM_IP/api/dialup/profiles" \
+-H "Cookie: $COOKIE" -H "__RequestVerificationToken: $TOKEN" \
+-H "Content-Type: text/xml"
diff --git a/README.md → 00README.md b/README.md → 00README.md
diff --git a/README.md b/README.md
@@ -15,7 +15,7 @@
   - Handling, when the device is hi-link but has no UI (see part with curl POST xml to /CGI)
 
 ### Step-by-step
-  - (Optional) put 70-huawei-e3.rules and huawei_e3.conf in correct places for UDEV usb-modeswitch and reload-rules/restart-computer
+  - (Optional) put `70-huawei-e3.rules` and `huawei_e3.conf` in correct places for UDEV usb-modeswitch and reload-rules/restart-computer
   - Put all files into one folder, together with firmware 22.x and WebUI updates
   - Plug the E3372s-153 in stick-mode to USB, and wait for it to appear in `lsusb`
   - Run `./auto_install.sh`, observe output

diff --git a/70-huawei-e3.rules b/70-huawei-e3.rules
@@ -0,0 +1,5 @@
+# place in /etc/udev/rules.d/70-huawei-e3.rules
+
+SUBSYSTEM=="usb", ACTION=="add", ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1f01", RUN+="/usr/sbin/usb_modeswitch -c /etc/usb_modeswitch.d/huawei_e3.conf"
+SUBSYSTEM=="usb", ACTION=="add", ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="14fe", RUN+="/usr/sbin/usb_modeswitch -c /etc/usb_modeswitch.d/huawei_e3.conf"
+SUBSYSTEM=="net", ACTION=="add", ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="14dc", NAME="usb0"
diff --git a/README.md b/README.md
@@ -14,4 +14,11 @@
   - Handling special state, where 12d1:1442 ttyUSB0 provides AT-mode instead of correct godload
   - Handling, when the device is hi-link but has no UI (see part with curl POST xml to /CGI)
 
+### Step-by-step
+  - (Optional) put 70-huawei-e3.rules and huawei_e3.conf in correct places for UDEV usb-modeswitch and reload-rules/restart-computer
+  - Put all files into one folder, together with firmware 22.x and WebUI updates
+  - Plug the E3372s-153 in stick-mode to USB, and wait for it to appear in `lsusb`
+  - Run `./auto_install.sh`, observe output
+  - If everything runs correctly, the modem will restart itself, script will set it up with ifconfig/dhclient, and web interface should be on address `http://192.168.8.1/`
+
 ## WARNING, this is alpha version of scripts, everything you do is on your risk, i do not take any responsibility
diff --git a/huawei_e3.conf b/huawei_e3.conf
@@ -0,0 +1,8 @@
+# place in nano /etc/usb_modeswitch.d/huawei_e3.conf 
+
+TargetVendor=0x12d1
+TargetProductList="14db,14dc"
+HuaweiNewMode=1
+NoDriverLoading=1
+DefaultVendor=0x12d1
+DefaultProduct=0x1f01
diff --git a/README.md b/README.md
@@ -0,0 +1,17 @@
+# E3372s from STICK to HiLink mode installer
+
+### You need
+  - curl, usb-modeswitch, grep, awk, sudo (not necessary, last step can fail safely)
+  - balong_flash in $PATH ( https://github.com/forth32/balongflash.git )
+  - atinout in $PATH ( https://github.com/beralt/atinout.git will work fine )
+  - 2 files we flash (core sw update version 22.x, WebUI installer), we use these (you can probably use different balong-compatible):
+    - core sw: "E3372sUpdate_22.298.03.02.965.BIN" / "E3372sUpdate_22.298.03.02.965.exe"
+    - webui: "Update_WEBUI_17.100.06.00.03_Hilink_V7R2_9x25_CPIO.exe"
+
+### Scripts handle these situations:
+  - Taking the device from storage/cd-rom mode to correct flashing mode (godload)
+  - Taking the device from debug mode to correct flashing mode (godload)
+  - Handling special state, where 12d1:1442 ttyUSB0 provides AT-mode instead of correct godload
+  - Handling, when the device is hi-link but has no UI (see part with curl POST xml to /CGI)
+
+## WARNING, this is alpha version of scripts, everything you do is on your risk, i do not take any responsibility
diff --git a/auto_install.sh b/auto_install.sh
@@ -0,0 +1,94 @@
+#!/bin/bash
+
+echo () {
+  bash -c "echo [E3372s stick-to-hilink] $1"
+}
+
+IS_14FE=$(lsusb | grep 12d1\:14fe | wc -l)
+
+if [ "$IS_14FE" == "1" ] ; then
+  echo "14FE (mass-storage), switching to 1506 (AT mode)"
+  usb_modeswitch --verbose -J -v 0x12d1 -p 0x14fe
+  sleep 5
+else
+  echo "14FE not found, not switching"
+fi
+
+IS_1506=$(lsusb | grep 12d1\:1506 | wc -l)
+IS_1C05=$(lsusb | grep 12d1\:1c05 | wc -l)
+IS_14DC=$(lsusb | grep 12d1\:14dc | wc -l)
+IS_1566=$(lsusb | grep 12d1\:1566 | wc -l)
+if [ "$IS_1506" == "1" ] || [ "$IS_1566" == "1" ] ; then
+  echo "1506/1566 to godload"
+  ./godload.sh
+elif [ "$IS_1C05" == "1" ] ; then
+  echo "already in godload, not switching"
+elif [ "$IS_14DC" == "1" ] ; then
+  echo "in hi-link mode, switching back to debug"
+  sudo ifconfig usb0 up
+  sudo dhclient usb0
+  sleep 3
+  timeout 3 curl -X POST -d @sw_debug_mode.xml http://192.168.8.1/CGI
+  sleep 6
+  ./godload.sh
+fi
+
+IS_1C05=$(lsusb | grep 12d1\:1c05 | wc -l)
+IS_1442=$(lsusb | grep 12d1\:1442 | wc -l)
+if [ "$IS_1C05" == "1" ] ; then
+  balong_flash -p /dev/ttyUSB2 -gd E3372sUpdate_22.298.03.02.965.BIN
+  sleep 15
+elif [ "$IS_1442" == "1" ] ; then
+  echo "skip, 1442 means 1st balong flash already passed"
+else
+  echo "not in godload mode, exiting"
+  exit 1
+fi
+
+IS_1506=$(lsusb | grep 12d1\:1506 | wc -l)
+IS_1442=$(lsusb | grep 12d1\:1442 | wc -l)
+if [ "$IS_1506" == "1" ] && [ "$IS_1442" == "0" ] ; then
+  echo "1506 to godload"
+  ./godload.sh
+elif [ "$IS_1442" == "1" ] ; then
+  echo "skip, 1442 means we are still in godload mode"
+else
+  echo "not 1506 after balong_flash, something went wrong"
+  exit 1
+fi
+
+IS_USB0_AT=$(timeout 5 bash -c "echo 'AT' | atinout - /dev/ttyUSB0 - | grep OK | wc -l")
+IS_USB0_AT=$(timeout 5 bash -c "echo 'AT' | atinout - /dev/ttyUSB0 - | grep OK | wc -l")
+if [ "$IS_USB0_AT" == "1" ] ; then
+  ./godload.sh
+fi
+
+sleep 5
+
+IS_1C05=$(lsusb | grep 12d1\:1c05 | wc -l)
+IS_1442=$(lsusb | grep 12d1\:1442 | wc -l)
+if [ "$IS_1C05" == "1" ] || [ "$IS_1442" == "1" ] ; then
+  balong_flash -p /dev/ttyUSB0 -gd Update_WEBUI_17.100.06.00.03_Hilink_V7R2_9x25_CPIO.exe
+  sleep 15
+else
+  echo "not 1C05 after godload, something went wrong"
+  exit 1
+fi
+
+IS_1F01=$(lsusb | grep 12d1\:1f01 | wc -l)
+if [ "$IS_1F01" == "1" ] ; then
+  usb_modeswitch --verbose -J -v 0x12d1 -p 0x1f01
+  sleep 5
+else
+  echo "not 1F01 after balong_flash, maybe already automatically usb-modeswitched?"
+fi
+
+IS_14DC=$(lsusb | grep 12d1\:14dc | wc -l)
+if [ "$IS_14DC" == "1" ] ; then
+  sudo ifconfig usb0 up
+  ps aux | grep -i dhclient\ usb0 | awk '{print $2}' | xargs -L1 sudo kill -9
+  sudo dhclient usb0
+  ./device_info.sh
+fi
+
+exit 0
diff --git a/device_info.sh b/device_info.sh
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+MODEM_IP="192.168.8.1"
+curl -s -X GET "http://$MODEM_IP/api/webserver/SesTokInfo" > /tmp/ses_tok.xml
+COOKIE=`grep "SessionID=" /tmp/ses_tok.xml | cut -b 10-147`
+TOKEN=`grep "TokInfo" /tmp/ses_tok.xml | cut -b 10-41`
+
+curl -s -X GET "http://$MODEM_IP/api/device/information" \
+-H "Cookie: $COOKIE" -H "__RequestVerificationToken: $TOKEN" \
+-H "Content-Type: text/xml"
diff --git a/godload.sh b/godload.sh
@@ -0,0 +1,15 @@
+#!/bin/bash
+
+at() {
+ timeout 1 echo "$1" | atinout - /dev/ttyUSB0 -
+}
+echo "[godload] startup"
+
+at "AT"
+sleep 1
+at "AT"
+sleep 1
+at "AT^GODLOAD"
+
+echo "[godload] waiting 10 sec"
+sleep 10
diff --git a/sw_debug_mode.xml b/sw_debug_mode.xml
@@ -0,0 +1,11 @@
+<?xml version="1.0" encoding="UTF-8" ?> 
+<api version="1.0">
+  <header>
+    <function>switchMode</function>
+  </header>
+  <body>
+    <request>
+      <switchType>1</switchType> 
+    </request>
+  </body>
+</api>
No results found