Code_PhantomPain sjqlwy

使用JAV金鸡儿奖官网附带的工具JAV SQL 查询器，可查询各种类别的JavDB TOP250影片：

及分年数据（存在部分重复影片，原始数据的问题）：

Hello Pi

This is a writedown of how I installed my raspberry pi(s).

The base is a Proxmox, so I don't have to worry about reformat the SD card every time I wanna try out something new, as I can start VMs and LXC containers, as well as Docker containers once it's configured properly.

Note: Those files are versioned, so you can always look what changed from time to time.

Topics

Pimox

Prerequisites

Disto: Debian
Version: stable
Size: at least 4000
Username and password: please set
Autorun: enable
Init system: sysv
Mount folders: one can enable android folder mount for config and gcode
SSH: enable

NetworkManager WiFi Power Saving

NetworkManager supports WiFi powersaving but the function is rather undocumented.

From the source code: wifi.powersave can have the following value:

NM_SETTING_WIRELESS_POWERSAVE_DEFAULT (0): use the default value
NM_SETTING_WIRELESS_POWERSAVE_IGNORE (1): don't touch existing setting
NM_SETTING_WIRELESS_POWERSAVE_DISABLE (2): disable powersave

在 Ubuntu 16.04 為 Raspbian Jessie 交叉編譯 Qt 5.6 桌面版

筆記

Qt 在 Raspberry Pi 上可以跑兩種版本：

桌面版。你平常在 Linux 發行版裡看到的會是這個，包含 Raspbian 在內。通常基於 X11，就是個普通的 GUI 框架。
嵌入版。這個版本不需要鐘面系統，通常是直接走 framebuffer 直接把東西畫到螢幕上，適合一些嵌入式設備的應用。

這個教學會編譯桌面版，因為我對這個版本比較熟。我上次試的時候 OpenGL 在 embedded 版還有些問題，不過 Qt 在那之後有很多更新，狀況應該會好很多。Qt 官方 wiki 也有個相關的教學：

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

	#!/bin/bash

	# Script: osmc-java-jdownloader-installer.sh
	# Author: Jozef Pažin
	# Description: Wizard to install the current version of java and/or jdownloader on raspberry pi running osmc.
	# License: MIT \| use arbitrarily, attribution is not required
	# How to run:
	# - Check if this code is correct first because this script need to be run under root and run gist
	# from web is not recommended in terms of security only that you know exactly what it does. Check it:
	# curl -Ls https://gist.github.com/atiris/34dc670264274b3a472f2a718e4de83a/raw \| nano -

	/**
	* Marlin 3D Printer Firmware
	* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
	*
	* Based on Sprinter and grbl.
	* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
	*
	* This program is free software: you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation, either version 3 of the License, or

	#encoding=utf-8
	import requests
	from bs4 import BeautifulSoup
	import re
	import sys
	import datetime


	uid="11111" #用户名
	pwd="11111" #密码

	#!/bin/sh

	DESC="JDownloader 2 Headless"
	NAME=JDownloader2
	PIDFILE=/var/run/$NAME.pid
	COMMAND="/usr/bin/java -- -Djava.awt.headless=true -jar /home/osmc/jDownloader2/JDownloader.jar"
	RUN_AS=osmc

	d_start() {
	start-stop-daemon --start --quiet --background --make-pidfile --pidfile $PIDFILE --chuid $RUN_AS --exec $COMMAND