unkray · June 16, 2021 06:13 · Jun 12, 2016 · Jun 12, 2016 · Jun 8, 2016 · Jun 8, 2016
diff --git a/gistfile1.md b/gistfile1.md
@@ -30,7 +30,7 @@ We will need to add some extra php formulas to `brew` so that we can install PHP
     brew tap homebrew/dupes
     brew tap josegonzalez/homebrew-php
 
-tip: to uninstall a tap do
+**tip**: to uninstall a tap do
 
     brew untap xyz
 

diff --git a/gistfile1.md b/gistfile1.md
@@ -30,6 +30,10 @@ We will need to add some extra php formulas to `brew` so that we can install PHP
     brew tap homebrew/dupes
     brew tap josegonzalez/homebrew-php
 
+tip: to uninstall a tap do
+
+    brew untap xyz
+
 We can now install php:
 
     brew install --without-apache --with-fpm --with-mysql php56

diff --git a/gistfile1.md b/gistfile1.md
@@ -41,12 +41,12 @@ This will compile PHP on your machine and may take a few minutes.
 Make sure you use the version number that got installed previously:
 
     mkdir -p ~/Library/LaunchAgents
-    cp /usr/local/Cellar/php56/5.6.22/homebrew.mxcl.php56.plist ~/Library/LaunchAgents/
-    
+    cp /usr/local/opt/php56/homebrew.mxcl.php56.plist ~/Library/LaunchAgents/
+
 Start PHP-FPM:
 
     launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist
-    
+
 Check that PHP-FPM is listening on port 9000:
 
     lsof -Pni4 | grep LISTEN | grep php

diff --git a/gistfile1.md b/gistfile1.md
@@ -41,7 +41,7 @@ This will compile PHP on your machine and may take a few minutes.
 Make sure you use the version number that got installed previously:
 
     mkdir -p ~/Library/LaunchAgents
-    cp /usr/local/Cellar/php55/5.5.18/homebrew.mxcl.php56.plist ~/Library/LaunchAgents/
+    cp /usr/local/Cellar/php56/5.6.22/homebrew.mxcl.php56.plist ~/Library/LaunchAgents/
 
 Start PHP-FPM:
 

diff --git a/gistfile1.md b/gistfile1.md
@@ -41,11 +41,11 @@ This will compile PHP on your machine and may take a few minutes.
 Make sure you use the version number that got installed previously:
 
     mkdir -p ~/Library/LaunchAgents
-    cp /usr/local/Cellar/php55/5.5.18/homebrew.mxcl.php55.plist ~/Library/LaunchAgents/
+    cp /usr/local/Cellar/php55/5.5.18/homebrew.mxcl.php56.plist ~/Library/LaunchAgents/
 
 Start PHP-FPM:
 
-    launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist
+    launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php56.plist
 
 Check that PHP-FPM is listening on port 9000:
 

diff --git a/gistfile1.md b/gistfile1.md
@@ -32,7 +32,7 @@ We will need to add some extra php formulas to `brew` so that we can install PHP
 
 We can now install php:
 
-    brew install --without-apache --with-fpm --with-mysql php55
+    brew install --without-apache --with-fpm --with-mysql php56
 
 This will compile PHP on your machine and may take a few minutes.
 

diff --git a/gistfile1.md b/gistfile1.md
@@ -196,13 +196,13 @@ Start Nginx again:
 
 Thats it, everything should be up and running. Click on the links below to ensure that:
 
--[http://localhost](http://localhost) → “Nginx works” page
--[http://localhost/info](http://localhost/info) → phpinfo()
--[http://localhost/nope](http://localhost/nope) → ” Not Found” page
--[https://localhost:443](https://localhost:443) → “Nginx works” page (SSL)
--[https://localhost:443/info](https://localhost:443/info) → phpinfo() (SSL)
--[https://localhost:443/nope](https://localhost:443/nope) → “Not Found” page (SSL)
--[https://localhost:306](https://localhost:306) → phpMyAdmin (SSL)
+- [http://localhost](http://localhost) → “Nginx works” page
+- [http://localhost/info](http://localhost/info) → phpinfo()
+- [http://localhost/nope](http://localhost/nope) → ” Not Found” page
+- [https://localhost:443](https://localhost:443) → “Nginx works” page (SSL)
+- [https://localhost:443/info](https://localhost:443/info) → phpinfo() (SSL)
+- [https://localhost:443/nope](https://localhost:443/nope) → “Not Found” page (SSL)
+- [https://localhost:306](https://localhost:306) → phpMyAdmin (SSL)
 
 ## Control your services like a boss
 

diff --git a/gistfile1.md b/gistfile1.md
@@ -196,13 +196,13 @@ Start Nginx again:
 
 Thats it, everything should be up and running. Click on the links below to ensure that:
 
-[http://localhost](http://localhost) → “Nginx works” page
-[http://localhost/info](http://localhost/info) → phpinfo()
-[http://localhost/nope](http://localhost/nope) → ” Not Found” page
-[https://localhost:443](https://localhost:443) → “Nginx works” page (SSL)
-[https://localhost:443/info](https://localhost:443/info) → phpinfo() (SSL)
-[https://localhost:443/nope](https://localhost:443/nope) → “Not Found” page (SSL)
-[https://localhost:306](https://localhost:306) → phpMyAdmin (SSL)
+-[http://localhost](http://localhost) → “Nginx works” page
+-[http://localhost/info](http://localhost/info) → phpinfo()
+-[http://localhost/nope](http://localhost/nope) → ” Not Found” page
+-[https://localhost:443](https://localhost:443) → “Nginx works” page (SSL)
+-[https://localhost:443/info](https://localhost:443/info) → phpinfo() (SSL)
+-[https://localhost:443/nope](https://localhost:443/nope) → “Not Found” page (SSL)
+-[https://localhost:306](https://localhost:306) → phpMyAdmin (SSL)
 
 ## Control your services like a boss
 

diff --git a/gistfile1.md b/gistfile1.md
@@ -196,13 +196,13 @@ Start Nginx again:
 
 Thats it, everything should be up and running. Click on the links below to ensure that:
 
-http://localhost → “Nginx works” page
-http://localhost/info → phpinfo()
-http://localhost/nope → ” Not Found” page
-https://localhost:443 → “Nginx works” page (SSL)
-https://localhost:443/info → phpinfo() (SSL)
-https://localhost:443/nope → “Not Found” page (SSL)
-https://localhost:306 → phpMyAdmin (SSL)
+[http://localhost](http://localhost) → “Nginx works” page
+[http://localhost/info](http://localhost/info) → phpinfo()
+[http://localhost/nope](http://localhost/nope) → ” Not Found” page
+[https://localhost:443](https://localhost:443) → “Nginx works” page (SSL)
+[https://localhost:443/info](https://localhost:443/info) → phpinfo() (SSL)
+[https://localhost:443/nope](https://localhost:443/nope) → “Not Found” page (SSL)
+[https://localhost:306](https://localhost:306) → phpMyAdmin (SSL)
 
 ## Control your services like a boss
 

diff --git a/gistfile1.md b/gistfile1.md
@@ -0,0 +1,256 @@
+This is my take on how to get up and running with NGINX, PHP-FPM, MySQL and phpMyAdmin on OSX Yosemite. 
+
+This article is adapted from the [original by Jonas Friedmann](http://blog.frd.mn/install-nginx-php-fpm-mysql-and-phpmyadmin-on-os-x-mavericks-using-homebrew/). Who I just discovered is from Würzburg in Germany. A stonesthrow from where I was born ;)
+
+## Xcode
+Make sure you have the latest version of XCode installed. [Available from the Mac App Store](https://itunes.apple.com/gb/app/xcode/id497799835?mt=12).
+
+Install the Xcode Command Line Tools:
+
+    xcode-select --install
+
+## Homebrew 
+[Homebrew](http://brew.sh/) is the missing package manager for OSX. 
+
+Download and install using the following command:
+
+	ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+
+Check for any problems or conflicts:
+
+    brew doctor
+
+Update and Upgrade `brew` formulas:
+
+    brew update && brew upgrade
+
+## PHP-FPM
+We will need to add some extra php formulas to `brew` so that we can install PHP and PHP-FPM:
+
+    brew tap homebrew/dupes
+    brew tap josegonzalez/homebrew-php
+
+We can now install php:
+
+    brew install --without-apache --with-fpm --with-mysql php55
+
+This will compile PHP on your machine and may take a few minutes.
+
+#### Setup auto start
+
+Make sure you use the version number that got installed previously:
+
+    mkdir -p ~/Library/LaunchAgents
+    cp /usr/local/Cellar/php55/5.5.18/homebrew.mxcl.php55.plist ~/Library/LaunchAgents/
+
+Start PHP-FPM:
+
+    launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.php55.plist
+
+Check that PHP-FPM is listening on port 9000:
+
+    lsof -Pni4 | grep LISTEN | grep php
+
+## MySQL
+
+    brew install mysql
+
+#### Setup auto start
+
+    ln -sfv /usr/local/opt/mysql/*.plist ~/Library/LaunchAgents
+
+And start the database server:
+
+    launchctl load ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist
+
+#### Secure the installation
+
+    mysql_secure_installation
+
+
+#### Test the connection
+
+	mysql -uroot -p
+
+## phpMyAdmin 
+
+    brew install phpmyadmin
+
+## NGINX
+
+    brew install nginx
+
+#### Setup auto start
+
+Since we want to use port 80 have to start the Nginx process as root:
+
+	sudo cp /usr/local/opt/nginx/*.plist /Library/LaunchDaemons/
+	sudo chown root:wheel /Library/LaunchDaemons/homebrew.mxcl.nginx.plist
+
+#### Test web server
+
+Start Nginx for the first time:
+
+	sudo launchctl load /Library/LaunchDaemons/homebrew.mxcl.nginx.plist
+
+The default configuration is set that it will listen on port 8080 instead of the HTTP standard 80. Ignore that for now:
+
+	curl -IL http://localhost:8080
+
+The output should look like:
+
+```
+HTTP/1.1 200 OK
+Server: nginx/1.6.0
+Date: Tue, 08 Jul 2014 21:40:38 GMT
+Content-Type: text/html
+Content-Length: 612
+Last-Modified: Tue, 08 Jul 2014 21:35:25 GMT
+Connection: keep-alive
+ETag: &quot;53bc641d-264&quot;
+Accept-Ranges: bytes
+```
+
+Stop Nginx again:
+
+	sudo launchctl unload /Library/LaunchDaemons/homebrew.mxcl.nginx.plist
+
+## Configurations
+
+#### nginx.conf
+
+Create some folders which we are going to use in the configuration files:
+
+```
+mkdir -p /usr/local/etc/nginx/logs
+mkdir -p /usr/local/etc/nginx/sites-available
+mkdir -p /usr/local/etc/nginx/sites-enabled
+mkdir -p /usr/local/etc/nginx/conf.d
+mkdir -p /usr/local/etc/nginx/ssl
+sudo mkdir -p /var/www
+ 
+sudo chown :staff /var/www
+sudo chmod 775 /var/www
+```
+
+Remove the current default nginx.conf (also available as `/usr/local/etc/nginx/nginx.conf.default` in case you want to take a look) and download this custom one via curl from GitHub:
+
+
+	rm /usr/local/etc/nginx/nginx.conf
+
+	curl -L https://gist.github.com/frdmn/7853158/raw/nginx.conf -o /usr/local/etc/nginx/nginx.conf
+
+Download the following PHP-FPM configuration from GitHub:
+
+	curl -L https://gist.github.com/frdmn/7853158/raw/php-fpm -o /usr/local/etc/nginx/conf.d/php-fpm
+
+#### Create default virtual hosts
+
+```
+curl -L https://gist.github.com/frdmn/7853158/raw/sites-available_default -o /usr/local/etc/nginx/sites-available/default
+
+curl -L https://gist.github.com/frdmn/7853158/raw/sites-available_default-ssl -o /usr/local/etc/nginx/sites-available/default-ssl
+
+curl -L https://gist.github.com/frdmn/7853158/raw/sites-available_phpmyadmin -o /usr/local/etc/nginx/sites-available/phpmyadmin
+```
+
+Clone my example virtual host (including 404, 403, and phpinfo() rewrite) using git
+
+```
+git clone https://github.com/gil0mendes/nginx-virtual-host.git /var/www
+
+rm -rf /var/www/.git
+```
+
+#### Setup SSL
+
+Create folder for our SSL certificates and private keys:
+
+	mkdir -p /usr/local/etc/nginx/ssl
+
+Generate 4096bit RSA keys and the self-sign the certificates in one command:
+
+```
+openssl req -new -newkey rsa:4096 -days 365 -nodes -x509 -subj '/C=US/ST=State/L=Town/O=Office/CN=localhost' -keyout /usr/local/etc/nginx/ssl/localhost.key -out /usr/local/etc/nginx/ssl/localhost.crt
+
+openssl req -new -newkey rsa:4096 -days 365 -nodes -x509 -subj '/C=US/ST=State/L=Town/O=Office/CN=phpmyadmin' -keyout /usr/local/etc/nginx/ssl/phpmyadmin.key -out /usr/local/etc/nginx/ssl/phpmyadmin.crt
+```
+
+#### Enable virtual hosts
+
+Now we need to symlink the virtual hosts that we want to enable into the sites-enabled folder:
+
+```
+ln -sfv /usr/local/etc/nginx/sites-available/default /usr/local/etc/nginx/sites-enabled/default
+
+ln -sfv /usr/local/etc/nginx/sites-available/default-ssl /usr/local/etc/nginx/sites-enabled/default-ssl
+
+ln -sfv /usr/local/etc/nginx/sites-available/phpmyadmin /usr/local/etc/nginx/sites-enabled/phpmyadmin
+```
+
+Start Nginx again:
+
+	sudo launchctl load /Library/LaunchDaemons/homebrew.mxcl.nginx.plist
+
+#### Final tests
+
+Thats it, everything should be up and running. Click on the links below to ensure that:
+
+http://localhost → “Nginx works” page
+http://localhost/info → phpinfo()
+http://localhost/nope → ” Not Found” page
+https://localhost:443 → “Nginx works” page (SSL)
+https://localhost:443/info → phpinfo() (SSL)
+https://localhost:443/nope → “Not Found” page (SSL)
+https://localhost:306 → phpMyAdmin (SSL)
+
+## Control your services like a boss
+
+Because you probably need to restart the one or other service sooner or later, you probably want to set up some alias.
+Download aliases:
+
+```
+curl -L https://gist.github.com/mgmilcher/c3a1d0138dde3eb0f429/raw/ed04e90d7770dbb62c60e1e4a912f75adc46cb5e/osx-server-aliases -o /tmp/.aliases
+```
+
+For bash:
+
+	cat /tmp/.aliases >> ~/.profile
+
+For zsh:
+
+	cat /tmp/.aliases >> ~/.zshrc 
+
+Close and open the terminal or type `source ~/.profile` or `source ~/.zshrc` to reload the profile.
+
+The following commands are now available
+
+#### Nginx
+```
+nginx.start
+nginx.stop
+nginx.restart
+```
+
+#### PHP-FPM
+```
+php-fpm.start
+php-fpm.stop
+php-fpm.restart
+```
+
+#### MySQL
+```
+mysql.start
+mysql.stop
+mysql.restart
+```
+
+#### Nginx Logs
+```
+nginx.logs.error
+nginx.logs.access
+nginx.logs.default.access
+nginx.logs.default-ssl.access
+nginx.logs.phpmyadmin.access
+```
No results found